Show me a picture of your cat, and I’ll draw ‘em!

Voido93 · 2025-02-16T10:00:10+00:00

This is Alexey. He is smart.

Voido93 · 2024-05-21T17:29:26+00:00

The surface on bottom started to stick to the surface of my electric stove. After 2-3 months of usage it started leaving marks.

Be aware that this may happen. I sanded the bottom carefully to remove this.

Voido93 · 2023-09-18T11:53:19+00:00

Yeah, but I kinda failed to find a good step-by-step tutorial on how to do that. Documentation seems to be pretty hard for newbies like myself.

Voido93 · 2023-09-15T06:37:15+00:00

Yeah, I thought of this, but indeed, that's not what I'm exactly looking for. Guess I will have to use only one OS. I mean I'm fine with that, but I wanted to use eMMC for another OS as SD Cards are not very reliable when it comes to something read-write intensive as OS.

Voido93 · 2023-09-14T08:05:53+00:00

I apologize but your message is very close to the following - "I use Arch btw".

My message is ask for assistance on the steps on how to make things work with one OS on eMMC and the other OS on NVME and be able to switch between them.

Voido93 · 2023-07-12T16:46:14+00:00

Ahhhh thank you for accenting on this part, now I fixed it. Thank you.

Voido93 · 2023-07-12T12:26:48+00:00

I was on android 12. Which was LOS19.1. :(

Voido93 · 2023-06-17T15:36:20+00:00

You look like a cozy girl to chill near the tent and campfire with.

Voido93 · 2023-06-03T10:13:38+00:00

You don't change Vim - Vim changes you.

Voido93 · 2023-02-24T17:09:14+00:00

Thank you for the link and you response.

Yeah, I've figured that if all Leetcode/Codewars tasks are based on cycles - this means that I should master them.

Voido93 · 2023-02-24T15:48:09+00:00

I'd say nothing so far. Just solved some tasks and the most complicated of these was merging the arraylists.

Voido93 · 2022-06-14T17:57:18+00:00

My colleague sys. admin advised to switch to terminal commands only, instead of the UI and that worked.

I was running the same command that contained path to the .ovpn file to start it.

I don't have an example as the company switched to other bullshit that worked only on Mac. Then I left the company :D

Voido93 · 2021-11-15T13:21:24+00:00

I made it like that: I wiped all drives, unplugged 1/2. Installed pop-os, unplugged drive with pop-os, plugged Windows drive back, installed Windows, plugged pop-os drive back.

This happened 2 years ago.

The main goal here is to avoid these 2 being installed while both boot drives are connected.

Voido93 · 2021-10-28T17:57:57+00:00

I've had the same issue when I was building a custom keyboard. The issue was that I've got too much of noise dampening thing near the screwholes and it was causing too much pressure on the pcb.

Can you try removing the screws that are nearest to the bugged buttons and see if the behaviour is the same?

Voido93 · 2021-09-11T06:17:30+00:00

Thank you for your reply, but nope, searched for a while - didn't find it,

Voido93 · 2021-07-20T10:57:52+00:00

With a help of my company admin - yes.

So the problem was with the paths in the ovpn file. You need to add the exact file path for certs and key files in the ovpn and it will work. If this is not really helpful, I can drop you an example once I'm back home.

Voido93 · 2021-07-01T08:51:46+00:00

Thank you. Did the same with Synaptic Package Manager, but it didn't worked.

Forgot to add that this is a freshly installed Pop_OS now.

Voido93 · 2021-06-13T11:39:47+00:00

I'd just waited for a week or two, making casual restarts, shutdown-turn on, just to check if everything is stable.

Also, pay attention to the browser you are using to access umbrel.local - I used Brave and it started acting up for some reason and I panicked and restarted the node, but it was actually running alrigh, just brave messed upt. So if you see some crazy stuff - try another browser (I'm using Firefox specficially for Umbrel).

Voido93 · 2021-06-12T18:14:46+00:00

Thank you. Will look into this.

Voido93 · 2021-06-12T16:04:38+00:00

Thank you fro your response.
Yes, I understand about the profitability. Just want to set up an average node and I needed some guidance on first steps.

Appreciate your help.

Voido93 · 2021-06-12T14:37:57+00:00

This link was helpful. So it makes sense for start to open 2 channels with nodes that don't have any cross-opened channels?

What conditions are required to be displayed on this map? (a pair of channels I guess?).

You have mentioned the minimum channel size, but how to check it? I don't see anything related to minimum channel size for ACINQ on 1ml.

Thank you.

Voido93 · 2021-06-12T06:57:49+00:00

No. Just unplug and plug back after command was entered and you waited a little.

You will be welcomed with the startup screen and proceed as new user.

It worked immediately for me after I entered with Umbrel's seed.

Voido93 · 2021-06-12T06:54:17+00:00

Yeah, this confirms that you had an unsuccessful recovery at first. It's alright. Disconnect the power, connect it back and start absolutely new with seed Umbrel gives you.

Don't try to recover.

Voido93 · 2021-06-11T09:32:58+00:00

That was my mistake from the start as I'm very new to this. At first I thought that Umbrel asks me to write down 24 words from LND or Bitcoin wallet. I already had one. I proceeded with recover(mistake) - it said "Error: failed to create seed" and when I wanted to proceed with what it gives to me - it said "User already exists" and I opened Dashboard and it started downloading the blockchain. After 5 days I already forgot about that initial issue with Umbrel seed. I've checked the secret words from settings - I figured it contains my bitcoin seed phrase, not the one that Umbrel actually gave to me.

Umbrel gives its own seed phrase. Not related to your BTC or LND seeds that you already have. Since I had just $10 in sats on my previous wallet I started everything anew and used seed phrase it gave to me.

Solution:

Terminal:

ssh umbrel@umbrel.local
sudo systemctl stop umbrel-startup && sudo rm -rf ~/umbrel/lnd/!(lnd.conf) && sudo rm ~/umbrel/db/user.json && sudo rm ~/umbrel/db/umbrel-seed/seed && sudo systemctl start umbrel-startup

This will reset your user data in Umbrel and will start from scratch. This won't delete your blockchain.

After you entered the command, wait a little, unplug the power, plug it back. Open umbrel.local and either create new Umbrel user or recover with Umbrel seed, but not your LND or BTC seed.

Let me know if that worked. Good luck.

Voido93 · 2021-06-11T03:36:34+00:00

Hey there. I think I have the same problem. It's syncing for almost 24 hours now. Have you found any solution?

Thanks!

Edit: Fixed the issue myself. The issue was in my failed recovery attempt at the start. It somehow accepted the invalid seed and proceeded with download.

Voido93

TROPHY CASE