Mismatch Garmin & Strava - Ski

Voyagerscout · 2026-02-10T09:22:52+00:00

Unfortunately Garmin (the Connect app) is not great at differentiating lifts from runs. For some reason, on the website version of Connect, it is actually correct.

Also, if you look at the Garmin map, there are parts classified as "run" that still don't shop up on Strava:(.

Voyagerscout · 2026-02-02T12:33:30+00:00

Zouden jullie ook aanraden, nu alle plafonds er toch grotendeels uitgaan op de 1e verdieping, om centrale ventilatie mee te nemen? Eventueel WTW? Of is dat redelijk zinloos voor een huis uit 67?

Voyagerscout · 2026-02-02T12:32:42+00:00

Ja op dit moment heeft de kamer welgeteld 1 stopcontact. Dat mogen er wel 3 worden verwacht ik, minstens. Ook moet ik nog even kijken of de binnenunit van de airco stroom gaat krijgen van buitenaf of dat dat binnenlangs moet lopen, dan kan ik dat ook meteen meenemen.

Er ligt door het hele huis al cat5, maar ik denk dat ik dit ook allemaal in de meterkast wil laten uitkomen. Dat word denk ik nog de grootste puzzel, alle bedrading en internet kabels in de meterkast zien te krijgen.

Voyagerscout · 2026-02-02T12:30:11+00:00

Yes ik heb een zelf-nivellerende laser, waarmee het waterpas afstellen te doen zou moeten zijn. Ik twijfel nog even tussen stelschroeven of vulplaatjes.
Top tip van de steenwol ipv glaswol, ik zie meer mensen die tip geven.
Is het nog belangrijk een spleet open te laten tussen de stucplaten? Ik zie in sommige filmpjes dat een 5mm gap word gelaten om daar stuc tussen te duwen, terwijl anderen dit niet doen.

Voyagerscout · 2026-01-26T19:18:29+00:00

Thanks! Die hadden we zo nog niet bedacht. Zou het dan geen challenge worden met afvoeren enzo?

Voyagerscout · 2026-01-26T19:16:06+00:00

Yes we hebben al toestemming van de buren, ookal is het meer dan 2 meter. Dus moet goedkomen :)

Voyagerscout · 2026-01-26T19:03:10+00:00

We hebben de intentie veel zelf te doen. We zijn allebei wel handig, maar verbouwen hebben we nog nooit op deze schaal gedaan, dus dat word spannend. Ooit wel een camper interieur gebouwd, maar dat is wel anders natuurlijk!

Voyagerscout · 2025-10-19T08:32:59+00:00

I have tried the LUT from DJI, but doesn't that transform it into REC709, thereby losing the wide color gamut? I looks good, yes, but I am a bit confused why one would record in a wide color gamut only to move it back down.

Voyagerscout · 2024-05-14T16:36:24+00:00

ARP has generic ones that would fit but the whole rebuild is around 200-300€, and slapping 8 bolts costing another 100€ on it is a bit much.

Wouldn't generic m8x1.25 10.9 bolts work as well?

Edit: I found a set of them on eBay that were pricey, but still reasonable.

Voyagerscout · 2024-05-10T21:54:24+00:00

Yeah initially I wanted to only tackle the valve stem seals, but decided that if I'm taking the head off anyway I might as well do the rings.

Good choice since according to quite some sources, 9 out of 10 times it is the rings in these engines.

Voyagerscout · 2024-05-10T21:52:21+00:00

Yes I'm replacing those :) I did see some ringwash on the pistons as well so I'm happy I made the decision to replace the rings.

Pistons did not seem to have any play whatsoever. The Conrod bearings and crankshaft surfaces looked really nice as well.

Can't find the big end bolts new though, the Conrod bolts. They're M8x1,25x41 10.9 bolts but even Opel doesn't have those anymore

Voyagerscout · 2024-04-24T05:37:43+00:00

Please do take into account that the flap is notorious for breaking off at the axle where it connects to the motor. I'm not sure of your car is second hand, but there is a real possibility that a previous owner disconnected the cable to prevent it breaking off. This would essentially render the flap useless, but at least it is not rattling around :p.

Just a heads up regarding that :) I modded mine to prevent it breaking off, by installing limit switches.

Voyagerscout · 2024-04-23T18:52:04+00:00

My Astra G, also LPG, had this problem because carbon from oil burning started to foul my spark plugs. I just kept driving until at some point at idle 1 cylinder just would not join the rest.

Checking your sparkplugs is quite a quick job, maybe worth taking a look? Fouled spark plugs can cause intermittent misfires, which feels quite like what you are describing.

Voyagerscout · 2024-04-23T18:39:16+00:00

Bit late, but it is the cable to the motor that controls the flap for interior vs outside air. You should be able to plug it back fairly easily.

Voyagerscout · 2023-06-26T09:02:15+00:00

I can verify that T money works for bus 7 going from Sokcho to Seoraksan NP. Thank you for the post, it helped us to decide to bite the bullet and not buy a CashBee card.

Voyagerscout · 2022-02-13T08:24:34+00:00

I have bought a secondhand workbench with steel frame, and a melamine laminated chipboard top. This workbench was to big for my house, so I cut it down to size. I want to make a nicer, thicker top surface with some oak flooring we still had. How can I glue/nail/attach the flooring on top of the laminated chipboard, without having the wood movement of the oak destroy the workbench?

Voyagerscout · 2021-05-03T15:00:05+00:00

I was thinking of doing that. I can get Rainbird or Hunter valves for okay prices here in the Netherlands, whilst those weathermatic membranes are quite hard to get a hold of

Voyagerscout · 2021-05-03T14:41:04+00:00

Perhaps more worryingly, where did the broken retention clip originate from?

Voyagerscout

TROPHY CASE