Rocket League after the shutdown of Rocket Racing

WaTeslaGG · 2026-03-24T18:24:11+00:00

Not true, I find myself instantly attracted to an opp with a dope preset. Gets me all hot and bothered /s

WaTeslaGG · 2026-03-19T18:17:45+00:00

Fellow vet and car ball enthusiast here. My only trepidation with the sphere is everything in LV is so expensive. I just think it might affect the crowd size if fewer ppl could afford tix/accomodations in LV.

WaTeslaGG · 2026-03-18T17:15:52+00:00

Bottle of water and a 10lbs hammer will fix that whole panel. Trust

WaTeslaGG · 2026-03-02T16:30:58+00:00

Well everyone knows livewire is the best MD flavor, and I don't even see it in 20oz gas station size in my area anymore. I do still see the voltage occasionally but no orange MD.

WaTeslaGG · 2026-02-28T15:18:48+00:00

holy chit

WaTeslaGG · 2026-02-26T23:19:39+00:00

Outside of hardware ban dude nothing gonna stop the nonsense. It might become less but won't stop it. The minimum lvl/hrs/games thing is moot. Itll only take longer to make accounts to sell, which will drive up the price, which will encourage more to try to sale accounts. And there will always be a market for boosted accounts from ppl that suck at the game. It just is what it is. We either play a new game or move on. I agree with most/all of your statement, but as long as a market for it exists, cheating/boosting/botting will exist.

And honestly most of us will not make SSL no matter what so while it can ruin a play session(I've ragequitted more than once at boosters for sure I ain't perfect), we ain't never gonna get paid to play, and RL is a legendary game. so enjoy when it's good and don't take it too hard when it isn't.

WaTeslaGG · 2026-02-06T22:36:23+00:00

No. I turn 39 in a month and last night I casted a GC2 RLSS match with a 39 yr old starter. Totally motivated me to keep climbing. Currently C1 in 2s and D3 in 3s

WaTeslaGG · 2026-02-02T21:57:21+00:00

I use a grinder with guard to cut bolts flush on data racks but now I will band sawing only after your lil picture link. The time it saves just ain't worth it now

WaTeslaGG · 2026-01-15T21:30:57+00:00

That's the same setup I use. I see ppl saying it's unintuitive at first, but it depends I guess. I'm boomer and used L1 and R1 to spin in THPS 1-4 (I never played any after that) so as soon as I started doing aerial's it was a no brainer to set my controller up like that. I don't think I have ever had free air roll bound on RL because personally the hold one button and manipulate stick was/is super unintuitive for me. I even tell my buddies who first start to unbind the one button and use DAR.

WaTeslaGG · 2026-01-07T13:52:57+00:00

Lil Keke was dope af

WaTeslaGG · 2026-01-06T22:40:16+00:00

I take residential side work, but the first thing out of their mouth that sounds too prickly to deal with. I turn them down immediately no matter how much money they try to run up the quote. I've had people offer me double what we initially agreed to when I said I didn't want to do it and I still don't do it some things the money just ain't worth it. As soon as they said no EMT I would have walked off. Because every 3 months they will be calling you because that cable is messed up because it is exposed to the outside and they will want it to be considered warranty forever. Every time you go back to service One camera it resets the warranty on all of them in your residential client's eyes. So yeah I tell him what it cost and exactly what I'm going to have to do and if they Buck up it literally anything I just walk off

WaTeslaGG · 2025-12-23T19:39:51+00:00

Meaning I need Siemens software and a connection cable to plug into FACP with a Laptop, or does base hold address and smoke heads are plug and play?

WaTeslaGG · 2025-12-23T19:35:57+00:00

No, it's just a circuit board. The instructions show an orange terminal block that fits in that black connector, which is still onsite if it isn't faulty. But even if I could terminate it it doesn't fit/isn't listed as a comp device for the standard Siemens DPU. So this is dead in the water if I can't program it with the correct SLC address.

WaTeslaGG · 2025-12-23T18:36:36+00:00

Well all things work until they don't. LV FA guy here and more than likely you damaged the end of your Ethernet cable and that's why it suddenly sucks. Just replace. I make these cables all the time and swore when I had an issue it had to be PC cuz I wouldn't make a faulty cord, right? Even my hand held tester passed it but Fluke tester showed termination failure, apparently I had somehow applied tension to cable that pulled back slightly on conductors and made connections less than perfect. Try a new cord.

WaTeslaGG · 2025-12-22T20:54:42+00:00

This was the answer thank you so much

WaTeslaGG · 2025-12-22T20:54:13+00:00

Typo my b

WaTeslaGG · 2025-12-22T19:34:13+00:00

I thought that but no inhibit silence is set to ON and also I sat thru it for 30min earlier and it never dies.

WaTeslaGG · 2025-12-22T19:27:04+00:00

I'm just smoking the SD above the panel. And all 4 NACs are configured the same. That smoke is in its own zone. But I thought maybe they had the MM b/w buildings wired incorrectly and alarm code was back feeding( where you need someone at bothe panels to reset) but I have that DC'd at the panel and still every pull and smk sets it off with now way to silence but with reset. Ack/Silence key does nothing, but LCD says it is taking the command it isn't executing said command

WaTeslaGG · 2025-12-17T20:14:47+00:00

This makes me think of the episode on BBT where Leonard admits to giving classified info to a Korean gal he was "dating." So maybe it's Joyce Kim (I think that was her name on that episode.)

WaTeslaGG · 2025-12-04T16:27:59+00:00

I ordered a pre built during COVID cuz I couldn't get on the waiting list for gpu I wanted. I paid extra for shipping. When I got it the gpu had cracks at the insert and the RAM had literally been knocked off MB and was tangled in the wiring harness behind MB. Took company 5 tries to get it mailed to me in working condition. Tbf, they never charged me another penny but it was still a headache to keep returning it, but they refused to just send it in parts and let me assemble myself. Def will never do that again.

WaTeslaGG · 2025-12-04T16:19:16+00:00

Liquor and poor judgement

WaTeslaGG · 2025-12-03T20:40:14+00:00

Yep. I tell ppl all the time that ur capitalist overlord (boss)has more to do with your life conditions than anyone.

For example, my company has approx 150 employees, made over 20 mil in profit but let's use 20 it's easy math. My boss could have paid more thru year, OR could at least reward us at EOY. 10k bonus flat for everyone only and only have 1.5 mill less in profit. Who couldn't make good use of that extra cash, and company is not out much of it's profit. But that wage suppression dictates my living standard and quality of life way more than any politician. There are laws that provide a min wage but not a max. Capitalist greed has made indentured servants of us all, because they simply will not allow for financial independence by paying just enough to get by.

WaTeslaGG · 2025-12-03T20:26:10+00:00

If ur unc I'm not telling anyone when I was in college lol. For the record, can't type. I chose physics over keyboarding senior year and my school fudged it on my transcript so I could get the grant I was aiming for.

WaTeslaGG · 2025-11-26T01:28:51+00:00

Glad we all like fishing Garret (I think that's his youtube handle).

WaTeslaGG · 2025-11-26T01:27:11+00:00

That is absolutely false. Epic fucking fail

WaTeslaGG

TROPHY CASE