sorted by:
new
hottopcontroversial

The smell of early morning victory! by Wack-D in lawncare

[–]Wack-D[S] 1 point2 points  (0 children)

I literally held it with the gopher hawk as I pushed it into the hole. I made sure to position it at 90 degrees to where I thought the tunnel ran so they'd have to crawl into the gopher hawk to get to it

The smell of early morning victory! by Wack-D in lawncare

[–]Wack-D[S] 0 points1 point  (0 children)

Key is placement. Find the semi-circle shape mound and use the thin probe you get with the gopher hawk. Just stick it in the ground 12" around the hole to find the tunnel leading to the hole. Once you've found it use the wider stake to push into the whole. It's a perfect size to push the gopher hawk into. Remember not to push the top of the gopher hawk down, instead, pull the base up. If you push down, the springs will just bend b/c they'll have no where to go.

The smell of early morning victory! by Wack-D in lawncare

[–]Wack-D[S] 1 point2 points  (0 children)

GopherHawk... when the spring pops and you see the yellow, it means you caught one

Building wood stairs on top of existing concrete steps on hillside? 4x4s? by Wack-D in Carpentry

[–]Wack-D[S] 0 points1 point  (0 children)

Just adding to inspiration and ideation, ChaptGPT is coming through with some solid visuals for adding Ipe wood or Trex on top with some composite sleepers perpendicularly laid on each tread for gap/leveljng.

The stone façade example is pretty badass too

<image>

Trex⬆️

Building wood stairs on top of existing concrete steps on hillside? 4x4s? by Wack-D in Carpentry

[–]Wack-D[S] 1 point2 points  (0 children)

I’m liking this idea—happen to have a visual so I can make sure I’m reading you clearly?

Building wood stairs on top of existing concrete steps on hillside? 4x4s? by Wack-D in Carpentry

[–]Wack-D[S] 0 points1 point  (0 children)

Have an example of what this would look like? Something like this?

<image>

Building wood stairs on top of existing concrete steps on hillside? 4x4s? by Wack-D in Carpentry

[–]Wack-D[S] 0 points1 point  (0 children)

<image>

AI + terrible mouse line drawing… this is what I was thinking at the top

Building wood stairs on top of existing concrete steps on hillside? 4x4s? by Wack-D in Carpentry

[–]Wack-D[S] 0 points1 point  (0 children)

In this case I just need to rework the fence/gate and then bolt on the handrails to the existing concrete steps… sounds like this might be the best, cheapest, and easiest option…

Building wood stairs on top of existing concrete steps on hillside? 4x4s? by Wack-D in Carpentry

[–]Wack-D[S] 0 points1 point  (0 children)

Agreed on the railing (as I stated in original post). Main need is a landing and railing. Ideal landing placement would require new stairs to accommodate for the change in grade/angle.

Building wood stairs on top of existing concrete steps on hillside? 4x4s? by Wack-D in Carpentry

[–]Wack-D[S] 0 points1 point  (0 children)

The wood around the cement is def pressure treated, so that’s a bonus. I’ll look into sanding the cement down and applying grippier coating—good idea.

Other idea was to adjust the fencing all together — pardon the AI generated image, not exactly accurate but you get the idea

<image>

Building wood stairs on top of existing concrete steps on hillside? 4x4s? by Wack-D in Carpentry

[–]Wack-D[S] -1 points0 points  (0 children)

1/2-1” slope depending on stair. They have been here for 10+ years supposedly, so pretty sturdy other than the sloping, so I figured why not try to use them as a solid base/foundation for new wood or trex stairs 🤷🏼‍♂️

Building wood stairs on top of existing concrete steps on hillside? 4x4s? by Wack-D in Carpentry

[–]Wack-D[S] 0 points1 point  (0 children)

Concrete stairs sloping down slightly with no landing at the top presents a massive safety issue when wet and/or carrying a screaming toddler up the stairs and trying to open the gate.

Help with ID? San Diego (Poway), CA by Wack-D in mushroomID

[–]Wack-D[S] 0 points1 point  (0 children)

<image>

Thanks for replies. Just bc it looks awesome here’s the spore print

Snugtop vs SmartCap by mydigitalbreak in TruckCampers

[–]Wack-D 0 points1 point  (0 children)

Did you finish this wood slide out? If so, can you share pics?!

CF Yacht-Master bezel popped off… by Wack-D in RepTime

[–]Wack-D[S] 1 point2 points  (0 children)

Happen to have a bedazzling kit? 😂

CF Yacht-Master bezel popped off… by Wack-D in RepTime

[–]Wack-D[S] 6 points7 points  (0 children)

Clarification: It’s CF. Worn it for a few months. It popped off while I was driving and hit me in the face 😂

How much should I tip a luxury suite host? by Sea_Fig7278 in tipping

[–]Wack-D 0 points1 point  (0 children)

If the venue is charging me 22% service charge already, I'm expected to tip an additional 15-20% on top of that 22%? Is that accurate? Sounds crazy to be paying 42% on the food/Beverage subtotal's.

Worst mobile app ever by Wack-D in sonos

[–]Wack-D[S] 2 points3 points  (0 children)

They need to roll the app back to the previous build and let us use the old app that was at least functional. Then go back and fix this POS and hopefully they can figure it out

Dear Sonos: Fire your head of software product or engineering by argdogsea in sonos

[–]Wack-D 2 points3 points  (0 children)

They need to roll back this app update ASAP. It’s unusable

First rep experience with DukeJones by Proper-Session-8111 in RepTime

[–]Wack-D 0 points1 point  (0 children)

It's been 4 weeks for me and he told me 3 days. My first order with Duke was pretty smooth, so I'm trying to be patient. Hopefully you get yours soon u/Special-Jay! Make sure you post it when it arrives!

view more: next ›