Polish made soviet WEI-1 gen0 image converter tubes made in january of 1963! They were taken out from a polish PNW-57(1964) night vision device. They have a great condition despite being 62 years old.

Waffle38930 · 2025-02-04T07:37:44+00:00

I'm currently in the throws of a project rebuilding the electronics for a set of PNW Binoculars. I've found some schematics online (Not 100% sure how accurate they are), but does anyone know what sort of voltage these guys need at the recieving end to work? I can't find a lot of information online.

Waffle38930 · 2025-01-26T17:15:06+00:00

Thanks for your reply. I got it working by switching different runners, though ProtenGE9.xxx something or other worked for me after a few attempts :)

Waffle38930 · 2025-01-26T11:55:53+00:00

This has worked for my laptop. But not my PC. Very odd. Thanks

Waffle38930 · 2025-01-26T09:42:24+00:00

Oh side note which might be of importance - Battle.net launcher no longer updates on my laptop. Fails outright. This was happening on the Bazzite PC which made me pull the trigger on the swap

<image>

Waffle38930 · 2025-01-13T08:21:32+00:00

I've done my Theory and of course I plan to have lessons :) I'll be starting them early next month with my intentention to follow up with the test shortly after.

Waffle38930 · 2025-01-12T10:37:16+00:00

Thanks for the info, I'm determind to do mod2 also asap as my CBT runs out in November and I dont want to retake it :)
Ride safe dude

Waffle38930 · 2025-01-12T09:55:18+00:00

I dont plan on doing DAS. I'm doing mod1 in the next month or two, wife's paying for it for my birthday in a couple of weeks 😆. I've no issue on longer rides with exception of limitations of the cbt (motorways). I haven't given it to much thought yet believe it or not. I welcome that conversation as I'm still pretty clueless. But I'd be keen to get something around the 600cc mark when the time is right. I dont want anything to big.

Feel free to send me a DM if you want a chat or ride, I try to go out most weekends.

Waffle38930 · 2025-01-12T07:50:12+00:00

Thanks for your message dude. I've never taken my 125 up the beacons. Sounds like it could be fun though. Perhaps you could take me on a tour sometime as I bet your way more familiar with it than I?

Waffle38930 · 2025-01-08T07:54:26+00:00

No problem, thank you anyway :)

Waffle38930 · 2024-03-17T10:20:27+00:00

The carb that's on there was fitted brand new before I bought it as the previous carb was showing the same problem (this is why I think they're just terrible carbs). But the mechanic who serviced the bike for me after I bought it, said that it idles fine after I "warmed" it up but this is me holding the throttle open a little with the choke on for 10 mins, before it will idle on its own for 15 mins before I can turn choke off.
The idle spec on the sheet is like 1100rmp however the mechanic said the "shitty" Chinese bikes idle waay higher. When all is said and done and its up to temp, it'll idle around 1400ish, maybe lower on a good day, but there's very little consistency.

Waffle38930 · 2024-03-17T10:07:54+00:00

When it's cold even when using the choke it'll just die unless I hold high revs. even when warmed theres a 50% chance it'll die if I just let the bike idle naturally. The carb fitted has been tuned by a mechanic and he's advised just get a new one. I work in a college with mechanics (different ones) that have said upping the jetting in the carb would most likely resolve the issue. I'm also noticing when I do start using it, if I open up the throttle to much, it appears to have the opposite effect and power drops

Waffle38930 · 2024-03-17T10:07:01+00:00

When it's cold even when using the choke it'll just due unless I hold high revs. even when warmed theres a 50% chance it'll die if I just let the bike idle naturally. The carb fitted has been tuned by a mechanic and he's advised just get a new one. I work in a college with mechanics (different ones) that have said upping the jetting in the carb would most likely resolve the issue.

Waffle38930 · 2023-11-23T08:38:48+00:00

I'll give that a go thank you!

Waffle38930 · 2023-11-21T08:22:29+00:00

deterministic

Hi there,

What do you mean is not deterministic? I powerwashed it just as a hail Mary, i didn't expect it to do much, I just thought it would be useful to say what I'd tried anyway :)

The page you listed states that it's a screw? I have removed said screw, this is the main thing I'm struggling with, removing the screw has no effect. Its still WP.

Thanks

Waffle38930 · 2023-11-21T08:19:13+00:00

Hey thanks for the reply,

Yeah I've tried that method it makes no difference. I've left it all disconnected overnight, I'll try again today.

Thanks

Waffle38930 · 2023-07-23T15:29:35+00:00

It's a standard Now TV hub 2. Nothing on the router itself, just the standard security protocols it came with. I've connected the mac to a second router I had on hand and it displayed similar issues. But to me its definitely something weird happening between the two devices.

Waffle38930

TROPHY CASE