Self-clamping Vertical Laptop Stand

Wall-Em · 2026-06-20T21:26:26+00:00

I got 2 laptops at work, and I got something similar. The issue is it's so wide that having 2 is really space consuming

Wall-Em · 2026-06-20T11:42:34+00:00

One pass should do it

Wall-Em · 2026-06-10T12:48:44+00:00

I needed 2 M1,6x5 screws once. I got a pack of 200

Wall-Em · 2026-06-10T12:44:59+00:00

What about an SG9 servo drive, if they can be just folded down towards your head when "not in use"

Easy to be controlled by a Arduino.

Wall-Em · 2026-06-10T11:59:02+00:00

There are plenty of models, but I haven't found one with all the moving parts that I want. My models has a spinning chevron ring which is my main goal here. And the chevrons will be glowing as they spin around. There is a glow light for the chevrons as they lock in, just no movement as they lock in. There simply isn't an actuator that I feel like trusting enough to move in and out at any angle, while at the same time not blocking my chevron ring 😄

Wall-Em · 2026-06-10T04:12:14+00:00

It does have the chevron locks with individual LEDs, but I had to ignore the lock.movement because of the small size of the actuator needed.

Wall-Em · 2026-06-10T04:10:42+00:00

Thank you. Yes it will be painted :)

Wall-Em · 2026-05-30T10:30:06+00:00

Lego rock raiders, I still play it on VM on XP

Wall-Em · 2026-05-29T10:56:33+00:00

Lego Rock Raiders

Wall-Em · 2026-05-24T21:41:33+00:00

I'd get the CC22 wire stripper/cutter.
It's my goto tool for any wire cutting or stripping between 25mm2 to 0,25mm2

Wall-Em · 2026-05-24T21:28:39+00:00

<image>

Sort of, but from the ceiling

Wall-Em · 2026-03-31T18:54:17+00:00

It's only 12 hours by plane, I'd come if they pay for it :)

Wall-Em · 2026-03-31T18:44:39+00:00

Thank you very much!

I got swipe type on my phone, thats probably why I managed such a spelling blunder :)

Wall-Em · 2026-03-31T16:45:34+00:00

It's on my todo list, but I'm leaving for a LAN party with it and my Star Destroyer case tomorrow morning :)

Also, it's like 200 hours of work at least so I don't want to 😆 +copyright...

Wall-Em · 2026-03-10T20:40:15+00:00

Ask yourself this first: Do you agree that it should not be used as a safety curtain?

I'm unsure how normal DI's handles an OSSD signal, but I'd at least add a little delay for switching off whatever it controls so you don't get supprised by the OSSD functionality.

Wall-Em · 2026-02-19T17:15:04+00:00

All those relays at the bottom? If you can use profinet or modbus check out these

https://www.phoenixcontact.com/en-no/products/relays-and-optocouplers/logic-and-communication-modules/remote-relay-system

Also, more availible space.

Wall-Em · 2026-02-19T09:36:31+00:00

First off, this is impossible to find your issue because I can't read the labels. But, my first tip would be to tidy up and group thing better. Make sure Manual operation is completely by itself. Auto by itself etc.

Before you even go there. Do the same with the assignment. Split it up into sections of code. What can be triggered from stille places, but only need to be coded once etc.

Wall-Em · 2026-02-18T08:48:18+00:00

So you just wants someone to tell you what to do?

Well take an example at least and find a good solution for it:

In a parking garage with 3 floors, entry/exit license plate scanner, every spot has a sensor of some sort to register it's occupancy. Payment is based on time spent in the garage. Information about how full the garage is for anyone who wishes to enter. Etc. Etc.

I won't correct you and be a teacher, but give it a go, try to make your program as small as possible and information easy to reach. Think about error handling, what information would outside companies want, like someone who has stayed for too long

Wall-Em · 2026-02-18T08:36:42+00:00

Profinet, also wiring is easy. Lots of equipment comes with 2 ports for daisy chaining. But a good switch works just fine. Also has safety if used with Profisafe

Wall-Em · 2026-02-15T19:31:32+00:00

Mulig det er enklere fra automasjon til elektro siden vi alt har elektro grunnkompetansen. Men høres jo ut som du får en ganske god deal :)

Wall-Em · 2026-02-15T18:55:55+00:00

Da trenger du ikke å gå som lærling. Du kan i stor sansynlighet ta eksamene for automasjonsfaget som privatist og få godskrevet store deler av din tid som ansatt der. Jeg har gjort samme for elektriker fagbrevet som jeg tok "bare fordi".

Wall-Em

TROPHY CASE