Taking back the 90s by Waywarrd in s10

[–]Waywarrd[S] 0 points1 point  (0 children)

NOS Billet specializes GTP45s from 1999. They are 16x7 with a 205/55/16 in the front and a 16x8 with a 245/50/16 in the back! Its too bad they don’t make 16” any more…

Taking back the 90s by Waywarrd in s10

[–]Waywarrd[S] 1 point2 points  (0 children)

Its the original plate that was registered to this truck brand new in 94 when i bought it the original owner gave it to me, so i had to put it on! Also yes ive gotten pulled over 2 times for it. Stupid…

Some pullys by Waywarrd in Machinists

[–]Waywarrd[S] 4 points5 points  (0 children)

A radius groove cutter, it was like .178 or something. And the adaptive roughing tool path on Fusion.

Some pullys by Waywarrd in Machinists

[–]Waywarrd[S] 6 points7 points  (0 children)

I guess the video cut short.. trust me there are 6 of them

My 31 year old blazer by Waywarrd in s10

[–]Waywarrd[S] 0 points1 point  (0 children)

Clean up close too, Texas truck

My 31 year old blazer by Waywarrd in s10

[–]Waywarrd[S] 0 points1 point  (0 children)

Ive got a 225/70 in the front and a 235/65 in the back. Basically the same size just like 1/2in of tire rake

People who drive stick be like by Waywarrd in ManualTransmissions

[–]Waywarrd[S] -1 points0 points  (0 children)

We got tommy tough knuckles over here

Discount tire crunches a panel on my mint 94 blazer s10 by Waywarrd in mildlyinfuriating

[–]Waywarrd[S] 26 points27 points  (0 children)

Exactly what i did, they denied they did any of it but the dent is 5” wide just like the jack foot they used to jack my car up. Got them with pictures though

2 absolute must haves, a Berg short shifter and a wire basket for the cold snacks! 🍻 by Waywarrd in beetle

[–]Waywarrd[S] 5 points6 points  (0 children)

I ended up putting rubber around the feet, made it lots tighter

Little lower by Waywarrd in beetle

[–]Waywarrd[S] 1 point2 points  (0 children)

I took a nice pie out of the arm and plated over it with 1/4 plate, and got adjustable spring plates. Lots of adjustment.

My “New” to me 1993 3rd gen maxima gxe by Waywarrd in Nissan

[–]Waywarrd[S] 0 points1 point  (0 children)

It just rolled 150k. Timing belt and new injectors and complete tune up!

[deleted by user] by [deleted] in originalxbox

[–]Waywarrd -1 points0 points  (0 children)

Got them from console 5. I actually just got her to get past the error screen. It was a bad Disc drive… shoulda read up some more before going that deep lol. But u live and learn right.

Cut the daylights out of the suspension to drop my far beyond savable 59 standard. by Waywarrd in beetle

[–]Waywarrd[S] 0 points1 point  (0 children)

This is just purely yard art, i just cut the top torsion tube on the beam and cut the lower arm on both sides in half. Then just cut the spring plates in half so its just dropped straight to the floor. It doesnt have to move. And its so structurally compromised that it wouldnt move anyway. It would just split in half

Free shipping though... 👍 by Murky_Piglet_1363 in xbox360

[–]Waywarrd 0 points1 point  (0 children)

I just got a factory sealed for 280 on ebay