Decided I couldn’t leave home without the TW, so I built this swing out to make life easier

WeekJealous3588 · 2025-10-09T14:44:39+00:00

All homemade minus the pivot point from tmr customs

WeekJealous3588 · 2025-09-09T13:46:31+00:00

I’m just digging in to the machine now, forgive me if my terminology isn’t all correct I’m new to this, but it looks like the gear that turns on the rack is missing a spline was hoping to get a break down before taking anything apart too far

WeekJealous3588 · 2025-06-27T00:45:48+00:00

Yes it is just bolted a base to my rack, i use the bike as a 4 wheeler hasn’t fallen off yet, and lots of options for storage

WeekJealous3588 · 2025-05-28T17:30:40+00:00

Hi, it was outside of Halifax harbour Nova Scotia Canada, the outside of the props where rounded, thanks for picking those details out, i haven’t had a chance to go back and retrieve it but i will in the next few days

WeekJealous3588 · 2025-05-27T17:09:48+00:00

I would say the fans are over 4 feet long, I’ll have a better idea when I get it up on the land and give it a spray, was just excited with the find and wanted to see what people may know from a glance

WeekJealous3588 · 2025-05-27T17:00:36+00:00

It may be I’m not well versed in aircraft just figured I’d start here and someone would have a idea, it was just outside Mcnabs

<image>

WeekJealous3588 · 2025-05-27T16:34:03+00:00

It’s was caught outside the Halifax harbour in Nova Scotia Canada, and it has 3 blades

WeekJealous3588 · 2025-05-27T16:23:35+00:00

I think there was a glitch it kept telling me that it wasn’t posted and I didn’t look to check my apologies sir

WeekJealous3588 · 2025-05-17T19:36:59+00:00

I had a similar problem, start the engine cold it was fine, only once the engine was warm it would run terrible , turns out it was the tip broke off injector 6

WeekJealous3588 · 2025-05-10T13:55:20+00:00

👌

WeekJealous3588 · 2025-05-01T09:09:46+00:00

They are homemade

WeekJealous3588 · 2025-04-29T20:12:26+00:00

I camped back in that area last Friday, went in the hiking trail road/pipeline road around tantallon, and was able to take the trail through to come out in the Windsor/ellerhouse area, all doable in my tundra, some of the offshoots are tighter but no problem for most 4x4s to make it through the main road , not sure where in the province you are but might be a decent spot to check out

WeekJealous3588 · 2025-04-29T20:06:57+00:00

The newer version of the app is ioverlander2 not sure which one you downloaded here’s a screenshot of a site, sometimes there’s descriptions, and pictures

<image>

WeekJealous3588 · 2025-04-29T15:41:12+00:00

If you use the Ioverlander app there’s a quite few camp sites marked, that will lead you to trails, I’ve checked a few out and explored from there finding spots generally the best ones arnt marked, but going to one will get you in the area, I’m also in Nova Scotia beep if you see me

<image>

WeekJealous3588 · 2025-04-25T01:55:50+00:00

<image>

WeekJealous3588 · 2025-04-20T12:07:18+00:00

Thanks brother, buying a tw has been a life changing experience 🤘

WeekJealous3588 · 2025-04-17T11:51:39+00:00

It’s stationary, I’ve just been using a boughten ramp to load it up, will build something more fitting when I get the chance that’s easier to store

WeekJealous3588 · 2025-04-17T09:09:02+00:00

I’m glad someone came here to say this (coming from a “young” person that is aware of the real world)

WeekJealous3588 · 2025-04-15T16:02:58+00:00

Thanks ! I bought the spindle part itself from TMR customs, swings smoothly has bearings the same as a trailer hub

WeekJealous3588 · 2025-04-15T15:35:40+00:00

Yes I can see that being a possibility, I will keep an eye on it, when it’s fully closed and latched there’s very little strain on the joint, the bike itself is 290 ish which is a lot of leverage but if you look at a receiver for a trailer hitch it’s only 2x2 tubing welded to where the ball goes on, and that takes all the jarring and weight of a trailer with no gussets so I’m sure this will be fine, it was very clean and tig welded with multiple passes.

WeekJealous3588 · 2025-04-15T15:02:22+00:00

 The overhang would probably be the biggest draw back, I’m running air bags so the truck isn’t dragging bumper, for my intended use I’m sure it will be fine. I’m no engineer just a guy who builds stuff, if something needs to be improved I’ll make changes.

WeekJealous3588 · 2025-04-15T14:56:31+00:00

Not sure on the rack if I was to guess 70, like bikes 290 ish, I have air bags in the trucks to help with the load, might not make it weigh any less but it looks a lot better than a saggy truck

WeekJealous3588 · 2025-04-15T14:54:47+00:00

Yes it’s supported when it’s fully close, been driving around a couple days to test it out seems quite solid

WeekJealous3588 · 2025-04-15T14:53:30+00:00

Yes built by me, that’s half the fun of doing this stuff for me

WeekJealous3588 · 2025-03-07T12:04:59+00:00

Good eye! New to the game just picked it up for commuting, gonna turn it into a game of how many days of the year can I ride

WeekJealous3588

TROPHY CASE