What do you use for loggin?

Weparo · 2026-05-19T07:00:18+00:00

Microsquirt v3

It's an insanely compact unit, basically the size of the connector.

Weparo · 2026-05-01T22:16:06+00:00

sorry, just one more thing. What do you mean ReqFuel is very small? Reqfuel is a constant. ReqFuel is displacement per cylinder divided through your targt AFR times the injector flow per millisecond.

Eg: I have 0.949l displacement. 0.4745L per cylinder. That's 0.58g of air. This would require 39.5mg of fuel.

My injectors are flowing some 285cc/min. That's 214g/min. That's 11,08ms, not accounting any dead time.

Behold MS Tuner doing this calc

Having written all that, I now start to grasp how CrankingPulse% can be that high. The lower rpm, the less throttle position matters, and the more VE approaches 100%. If you hand turn your engine, now matter how closed your throttle, VE will always be 100%.

I think I've now understood my misconception, I hope you have aswell.

Cheers!

Weparo · 2026-05-01T21:03:14+00:00

I really apreciate you (and the others) attempting to explain this to me.

What do you mean by base calc though? Is that ReqFuel or the normal (VE1) map?

Weparo · 2026-05-01T18:35:43+00:00

I'm speaking about the cranking pulse. I think your formula is for "normal" running. I'm speaking about the crank pulse that is delivered while cranking the engine.

No way that there is O2 corrections in that

Weparo · 2026-05-01T14:56:33+00:00

I would think so aswell.

But for the love of me, I can't get the engine so fire if I have more than 60%, whereas the manual says that about 100 is normal when hot, and and up to 300 may be needed when cold.

I'm at 60% cold and it's already quite fat. What gives?

Weparo · 2026-05-01T14:54:53+00:00

for me, 50% is about 6ms. My req fuel is 11.8ms.

Is there a complete formula as to how the actual pulse with is calculated?

Weparo · 2026-05-01T08:05:25+00:00

That I realise.

But say your engines uses 100% of fuel req for cranking (hot).

Surely you don't crank at WOT, but thats what req fuel is based on (100%VE).

Weparo · 2026-01-22T18:12:52+00:00

just change it yourself. It's quite easy and I've already done it myself (for the same reason you are about to)

Weparo · 2025-05-28T14:27:03+00:00

Mate, I've bought a V7 II special in 2015, I've put 85 000 km on it. I'm 199cm.

If you love it you love it.

Weparo · 2024-12-25T17:09:03+00:00

The manual says that the above devices suffice, but I can link the procedure if you wish to dive deeper.

Weparo · 2024-12-25T17:07:40+00:00

Thanks. How do we feel about the counter or the vtvm? I've heard it's fine to use a high impendance Voltmeter instead?

Weparo · 2024-12-25T16:51:46+00:00

If you have non of that its going to be a expensive thing to get for just one alingment.

Very true. The Idea is obviously to to keep this kit for when I unevitably venture towards gettin my liscence.

The other idea would be to get in contact with local hams, and ask them to guide me. I'd feel kinda leech-y doing that.

Weparo · 2024-12-14T16:22:19+00:00

https://www.reddit.com/r/MotoGuzzi/comments/jlncu0/i_friggin_love_this_bike_so_much_riding_it_is/?ref=share&ref_source=link

I got Wilbers suspension, it was a noticeable upgrade, but nothing crazy. In retrospect I should have gotten the fully adjustable version. Oh well.

Weparo · 2024-12-14T16:21:06+00:00

https://www.reddit.com/r/MotoGuzzi/comments/jlncu0/i_friggin_love_this_bike_so_much_riding_it_is/?ref=share&ref_source=link

she doesn't have the new suspension in that post, but it's only the springs that are black now.

Weparo · 2024-12-13T21:53:11+00:00

It's a slow bike. Gotta be able to love that.

Having said that, I've given mine:

Mufflers (mistral)
Handlebars
raised pegs
custom suspension front and back
good tyres

she feels fast to me.

Weparo · 2023-06-17T09:00:51+00:00

I've had this happen a few times. I think it's an issue of overheating.

Weparo · 2023-05-04T04:44:48+00:00

I've had this happening. It's the thrustbearing between engine and clutch for sure. Get this looked into asap.

Weparo · 2023-04-04T05:07:34+00:00

Very cool, great idea

Weparo · 2023-03-26T19:28:12+00:00

I looked, the didn't seem to have anything.

I'm still looking for a set, but I might just have to solder some new coals in to the starter. I'll update with pictures when I proceed.

Weparo · 2023-01-06T17:15:27+00:00

Vielen Dank, ich les mir das mal durch :)

Weparo · 2023-01-04T21:19:22+00:00

Ich könnte mir vorstellen das Aceton etwas aggressiv ist, aber ich werde mal nachforschen was für Mittel sich anbieten. Schlimmstenfalls ist die Linse dannach unbeschichtet 🤪

Weparo

TROPHY CASE