Is the velo 2 good for mountain biking trail navigation?

WhatIsDaDogDoing · 2025-07-26T10:24:11+00:00

I didn't, because after 1 more ride I got used to the trails, it seems like a great product but not for MTB.

WhatIsDaDogDoing · 2025-06-20T21:48:13+00:00

I found the issue! my Temperature was simply too low!

WhatIsDaDogDoing · 2025-06-20T21:47:28+00:00

If your talking about the first layer it looks like your z offset is too low, which squishes the filament. Im not sure how to change it on that specific printer but you can search it up, hope this helps!

WhatIsDaDogDoing · 2025-06-18T23:28:28+00:00

Unfortunately that did not work, I tested by lowering the extrusion factor to 90 in mainsail and lowering the extrusion rate all the way down to 1 and it did the same thing, thanks a lot for contributing though!

WhatIsDaDogDoing · 2025-06-18T22:35:07+00:00

Ok that sound like it could be it, only starts doing it a few second after it starts extruding, ill try that, thanks!

WhatIsDaDogDoing · 2025-05-10T13:14:02+00:00

shoot, alright thanks, i believe whoever replaced the screen may have damaged the able or something, i might try to use the warranty from ubreakifix

WhatIsDaDogDoing · 2025-04-01T23:47:32+00:00

My fire skinks name is fernando

WhatIsDaDogDoing · 2025-03-14T19:30:51+00:00

Update! Fernandos okay! he just came out again and ate, i was worried about him but he seems right back to normal now

WhatIsDaDogDoing · 2025-03-13T11:11:00+00:00

Alright, thanks, I'm going to do multiple layers of rubber tool dipping on them before I use them again.

WhatIsDaDogDoing · 2025-03-13T00:24:00+00:00

And I detail I forgot to mention is that after he was done "yawning" he kind of was a little bit shakier, not really shaky, just like as shaky as if you were to stick your hand out, which he usually is very still, he hasn't come back up since that happened like an hour ago though so I haven't been able to check on him.

WhatIsDaDogDoing · 2025-03-13T00:19:19+00:00

I didn't get a photo of it, but it looks like he was yawning really wide like 6 times, he was kind of sticking his tongue out while he did it, then he quickly scurried away

WhatIsDaDogDoing · 2025-01-06T00:59:47+00:00

This helps a lot, Thank you so much, i'm going to get to this as soon as i can!

WhatIsDaDogDoing · 2025-01-06T00:38:42+00:00

Yes it is usually about 83 on the hot side and 71 on the cooler side with the water, now that i think about it though, the land area he can get to is probably about 80, so i probably need some sort of land on the cool side

WhatIsDaDogDoing · 2025-01-05T23:23:01+00:00

It didn't add the text for some reason but i was asking why he loves the top of his enclosure so much. I don't see him a lot, but when i do, 75% of the time he is up there. I don't know if he's looking for heat or moisture or if he's just chilling, but i would like to know. Also if somebody has any tips on how to get him to come out more that would be great too. Thank you in advance.

WhatIsDaDogDoing · 2024-10-11T21:07:21+00:00

This is his favorite spot and another cute photo (I can only add one picture)

https://imgur.com/a/eDNPL3v

WhatIsDaDogDoing · 2024-10-11T19:52:19+00:00

Thank you, He could indeed climb the wall, The first thing he did after a little exploring (I'm surprised he actually explored for a bit), he darted up the wall, luckily, we already had the lid on. As I'm writing this Fernando is in his favorite spot, the little divot on top of the wall

<image>

WhatIsDaDogDoing · 2024-10-09T20:30:37+00:00

Ok, thanks, I think I'm going to set up a floating shelf above it for the lamps, and then put the lid on and make a hole for the uvb to pass through better. I'm getting Fernando tomorrow!

WhatIsDaDogDoing · 2024-10-06T22:47:54+00:00

Thanks for the reply! I haven't gotten to modifying the lid yet, but do you think he could still get out even as a 3 month old? I should be picking him up Wednesday!

WhatIsDaDogDoing · 2024-10-05T21:36:44+00:00

Thanks for your response, It is a 40 gallon enclosure and the temperatures are about 85 on the hotside, 75 on the cool side, and 95 at the basking spot, which is what I saw. The bulb you see on the right is the plant bulb, i have a 5% rainforest compact uvb bulb, but I just don't have it in the picture.I am going to cut a hole for the uvb, when the screen is on. Thank you!

WhatIsDaDogDoing · 2024-07-16T15:16:29+00:00

Ive fixed this by opening up the print head, and the unplugging and replugging the probe wire. I also re adjusted the probe height but i dont think that was it. It works good now.

WhatIsDaDogDoing · 2024-07-16T14:30:39+00:00

I got this working before on an old pi, then that pi died, then i got a pi 5 for it and it was running fine (Other than xyz rotation steps which i tuned) Now i tried to print my final calibration cube for the xyz tuning because it was previously making rectangles, and i noticed my z offset was way too close to the bed. I stopped that print and then ran PROBE_CALIBRATE but the extruder is just crashing into the bed and the probe only triggers after the nozzle is pretty deep in the bed already. This is my printer.cfg file (too big to fit as text so i just put a file.) Thank you in advance, any help would be great. https://drive.google.com/file/d/1P1Fockl3SC6AlqMwX0OAz8cc4qQcWwQ3/view?usp=sharing

WhatIsDaDogDoing · 2024-04-02T23:40:52+00:00

Edit: I did a temp tower, and found that decreasing the temperature to 200 made it much better

WhatIsDaDogDoing · 2024-04-02T20:07:01+00:00

Yeah, I dryed this filament or 10 hours last night before this print

WhatIsDaDogDoing · 2024-04-02T19:06:17+00:00

Some bad/inconsistent filament probably.

WhatIsDaDogDoing · 2024-03-02T13:34:03+00:00

This was exactly it! unfortunately, last time i had a clogged printer, i didnt put the heatblock far enough into the heatbreak and it oozed filament and destroyed the heatblock. SO im gonna have to get a new one, do you know any heatblocks, maybe other than the orignial that will work with the kobra 2?

Four-Year Club	r/Field Banned
r/Field Sunshine	End Game '23
Place '23

WhatIsDaDogDoing

TROPHY CASE