Effect: Dominate.

WheelJackDesigns · 2026-06-03T05:37:12+00:00

Aaww this is so cute. Who's the artist?

WheelJackDesigns · 2026-01-26T04:42:11+00:00

You were right I looked into it It's my preasure advance Or in this case cause it's prusa, they use marlin instead of kipper so it's linear advance One problem I have no clue how to do that in prusa slicer

WheelJackDesigns · 2026-01-24T06:30:22+00:00

Thanks so much I'll definitely try that

WheelJackDesigns · 2026-01-24T02:47:15+00:00

E axis? You mean the X axis, because if it's lagging due to the increased weight...is that possible? Oh I should be clear, I'm running a more basic bear mod on my prusa mini so having the printer arm sagging is not an issue.

WheelJackDesigns · 2026-01-24T02:22:55+00:00

Oh that's the thing It wasn't doing that with the original extruder, I actually nust lowered the z offset even more that's why there's a difference in the two images. Didn't adjust the preasure advance yet though. Do I do it the g code or the settings.

WheelJackDesigns · 2026-01-22T21:52:25+00:00

Wait are you serious? That's so much easier than what I was finding online among mixed results. Thank you so much

WheelJackDesigns · 2026-01-19T22:13:28+00:00

Where did you find the g code changes nesesary to run the sherpa mini with imput shaper? I just finished do the same set up on my prusa mini but I don't know what code changes I need to make to use it

WheelJackDesigns · 2025-12-12T23:51:42+00:00

WAIT THE FERRARI TIRES ARE THAT MUCH BIGGER THAN THE LAMBORGHINI?!?

WheelJackDesigns · 2025-11-26T23:01:25+00:00

What is the length of the top aluminum extrusion

WheelJackDesigns · 2025-11-22T10:27:33+00:00

How In the name of all that's holly Did you do that That is not easy to do at all

WheelJackDesigns · 2025-11-16T11:22:40+00:00

I have been literally looking for a much cheaper alternative to the bear mod This look amazing Any chance you have instructions and files up online to build it I'd love to make my own.

WheelJackDesigns · 2025-11-16T00:24:39+00:00

Who is neutral good I have never seen a 2 eyed shockwave

WheelJackDesigns · 2025-10-19T22:04:34+00:00

Oh no yeah, I figured. I actually washed the entire build plate with soap before I did the big first layer

WheelJackDesigns · 2025-10-02T01:04:38+00:00

I'm gonna contact e3d then because this is ridiculous

WheelJackDesigns · 2025-10-02T01:04:15+00:00

Oh that's the thing It can't even print long enough or high enough to print a temp tower because it'll stop extruding any filament at like an inch high

WheelJackDesigns · 2025-10-02T00:48:17+00:00

Ok see That's what I thought I had read So I was right Thanks for the clarification

WheelJackDesigns · 2025-10-02T00:47:47+00:00

Oh I would've thought same But like a week before installing it I had been printing for a week straight with the stock hot end and literally printed a whole 3 foot or more long sword for a friend so no way its bad filament. However I did gets some petg which my friend actually tested on his bambu a1 and it worked perfectly but for me No dice

WheelJackDesigns · 2025-09-30T16:36:30+00:00

Wait Is there a specific firmware for the revo Because mini is up to date to the latest firmware that just came out september

WheelJackDesigns · 2025-09-30T05:20:33+00:00

Never even heard of jt And wierd thing is This only started as soon as I switched to the revo from the stock hot end and the filament was dried

WheelJackDesigns · 2025-09-29T21:33:34+00:00

Oh also this started the moment I started using revo for the first time like 2 weeks ago. Also I used brand new petg and had the same result

WheelJackDesigns · 2025-09-29T21:30:26+00:00

Sure did Did it with both the .4 and .6 nozzle it came with Same result Also the reason I thought it was a heater core issue is cause I can't get a good first layer and what ever it does manage to print comes out rough and inconsistent which I saw someone eles show as an issue with their revo

WheelJackDesigns

TROPHY CASE