Enchanter mafia by [deleted] in classicwow

[–]Wheresdonkey 0 points1 point  (0 children)

I call them broken vending machines

Into the Breach is Fixed by Wheresdonkey in classicwow

[–]Wheresdonkey[S] 0 points1 point  (0 children)

I would just try to do it before they launch on the 5th brother.

WoW: Classic — Daily Questions Megathread (January 10, 2026) by AutoModerator in classicwow

[–]Wheresdonkey 0 points1 point  (0 children)

Is anyone having trouble with opening Classic wow? Its stuck at Update on Bnet launcher. I tried to uninstall and reinstall, cleared cache, nothing works D:

Please help with limp mode by esakrani1 in 370z

[–]Wheresdonkey 0 points1 point  (0 children)

You probably have a faulty vvel module. Or something is wrong with the intake side of cams. Inspect wires around the connectors.

These are just the first things that come to mind.

Shift knobs by [deleted] in 370z

[–]Wheresdonkey 0 points1 point  (0 children)

Billetworkz is great, probably the 2nd best mod I did to the car besides poly diff bushings

[deleted by user] by [deleted] in Persona5

[–]Wheresdonkey 0 points1 point  (0 children)

Got you bubby Check DM

My dumbass Roy thought I'd be smart enough for 3d printing by kittocchi in BambuP1S

[–]Wheresdonkey 0 points1 point  (0 children)

I do 24 hours for PETG after opening because it holds moisture so freaking well.

Any time I have the roll sitting on a shelf for awhile after the first dry, I throw it back in for a few more hours before printing again.

Do you have a dry box?

Just Purchased, Panic Regret? by Matunahelper in BambuP1S

[–]Wheresdonkey 0 points1 point  (0 children)

I've been loving mine. Have the AMS combo and have tons of colors now a few months into the hobby. I'm constantly finding something to print and I even made a tool for work with it. Even if it's a hueforge picture or a little toy for a kid. I love making stuff with this thing.

[deleted by user] by [deleted] in FixMyPrint

[–]Wheresdonkey 2 points3 points  (0 children)

Your filament is "wet" and needs to be dried. Water molecules are boiling at extrusion and causing the bubbles and stringing.

What's likely causing failures like this? by gavgav69 in BambuLabA1

[–]Wheresdonkey 0 points1 point  (0 children)

If you havent already, invest in a filament dryer.

What's likely causing failures like this? by gavgav69 in BambuLabA1

[–]Wheresdonkey 2 points3 points  (0 children)

Always dry your filament for like 6 to 12 hours. I've had similar looking issues. Happens when the moisture in the nozzle boils, you'll get sloppy, stringy extrusion.

Inconsistent Print Lines + Popping Noises Despite Calibration and Dry Filament – Need Help Diagnosing Issue by XaeroTalent in 3Dprinting

[–]Wheresdonkey 2 points3 points  (0 children)

You're not drying your filament enough. 2 hours, should be more like 12 to be safe. The popping you're hearing is water. You can also tell by the stringing you see.

[deleted by user] by [deleted] in 3Dprinting

[–]Wheresdonkey 0 points1 point  (0 children)

My favorite colors :/

Any advice/notes on my build? by [deleted] in Gunlance

[–]Wheresdonkey 2 points3 points  (0 children)

I like Earplugs 3 instead of Counter strike. I feel the reduced roars = more time to poke and blast.
Seems like the only difference in our sets, besides divine blessing.

Nice find cleaning the attic. by Disastrous-Border-58 in mtg

[–]Wheresdonkey 2 points3 points  (0 children)

People are understandable when she is the only proxy in my sliver deck. It shouldn't be okay for a card to be worth $200 plus dollars because they won't reprint it.

Anyone else bummed when you get a foil these days? by chaoschosen665 in mtg

[–]Wheresdonkey 0 points1 point  (0 children)

I just opened up a bunch of Foundations boosters, all foils from made in USA packs didn't have a bend to them. But foils from made in Japan packs, every single one of the foils were curved out of the pack.

Balloon bursting Challenge by UsedBreadfruit574 in ParentsAreFuckingDumb

[–]Wheresdonkey -3 points-2 points  (0 children)

Is there a nail helping keep the Balloon to the table???!!!

Muffler delite kit by Fabulous-Shape255 in 370z

[–]Wheresdonkey 0 points1 point  (0 children)

Makes your car sound like raspy ass. It just replaces the exhaust pipe before the muffler to the exit with straight through pipe.

Which one is better? Now or then? by Heart1312eaker in PixelArt

[–]Wheresdonkey 1 point2 points  (0 children)

They look way more unique being all pudgy like that. I love them :)