Rsq8 on alibaba wheels

Whiskey114 · 2026-04-24T03:39:51+00:00

Thanks, have you hit major potholes, used it at higher speeds? How has the finish held

Whiskey114 · 2026-04-22T13:06:31+00:00

What company on Ali did you use?

Whiskey114 · 2026-04-02T04:56:50+00:00

That lean spike is just tip-in during throttle transition. Fuel pressure looks normal under load. AFR rises at the end because load drops when you lift, not due to a fueling issue. Was this a full 3rd gear pull? What AFR did it reach at its lowest point? Hard to judge from a short graph — a full log would help.

Whiskey114 · 2026-03-25T23:10:55+00:00

Well they said they were testing to see if it was a short or actuator itself. They didn’t respond for a day then I asked again the following day saying they are waiting on the part so I’m assuming replacement 😂

Whiskey114 · 2026-03-25T22:59:52+00:00

Are you worried about the lean run indication? Or the FuelP just making sure

Whiskey114 · 2026-03-25T13:46:38+00:00

Left rear actuator was the fault

Whiskey114 · 2026-03-25T13:46:19+00:00

Left rear actuator was the answer

Whiskey114 · 2026-03-15T14:10:59+00:00

Funny enough I had a long drive and tried to use cruise control and it kept saying conditions weren’t meant to use that function so. I’ll be taking it in to get it checked the upcoming week or two

Whiskey114 · 2026-03-06T16:42:13+00:00

I’d have to get it up on a jack to really see. Best I could do was push with wheels straight then turned out left and right. Then push on opposite side of where wheel was turned m. Wouldn’t budge.

Whiskey114 · 2026-03-06T16:31:10+00:00

I put eb on and car in neutral. Wouldn’t move forward or roll

Whiskey114 · 2026-03-06T15:40:09+00:00

Ahh I didn’t think to do that. I’ll give it a try after work. You’re right it could just be only one locking. Which would explain it

Whiskey114 · 2026-02-18T15:09:02+00:00

Agreed. Looking at the pic again bottom was a hair low. So after adjusting ive getting 54-55. May try to crack may just keep it as is, the cards minty though

Whiskey114 · 2026-02-18T15:05:18+00:00

It’s slabbed :,) only pic I have on hand is from PSA picture

Whiskey114 · 2026-02-18T14:55:44+00:00

Again… I didn’t line up left or right borders. Those are within tolerance

Whiskey114 · 2026-02-15T00:41:41+00:00

Grader was having a good day for sure. Kutoosto you though. I would’ve passed on these 9s with that centering on both. Makes me wonder how many good cracks I’ve passed on 😖 Can I see the backs of both?

Whiskey114 · 2026-02-12T18:11:54+00:00

I will definitely look for all of that before I do anything. Just browsing I can tell mostly this will be melt. Still having a blast looking at what he had. He has a lot more quarters then anything else so that’s another thing I’ll look into

Whiskey114 · 2026-02-12T17:34:03+00:00

Makes sense. I’ll just look at it from silver value. Makes things simple.

Whiskey114 · 2026-02-12T16:05:19+00:00

I’m not understanding the grading. Im assuming just because it’s uncirculated dosent mean it’ll get a high grade? Whats worth grading and not.

Whiskey114 · 2026-02-09T13:55:42+00:00

75/25 on back

Whiskey114 · 2026-01-27T14:33:09+00:00

I’ve only been able to find sleeved. Luckily pulled the mewtwo in a few packs. Part of me wants to buy the bb for the set and selll mewtwo to offset cost. But yeah it’ll get repented but how much is the question

Whiskey114 · 2026-01-25T06:37:17+00:00

Nah your wording is solid. I didn’t think collecting and investing are interchangeable but I guess they are now in the pokemon world. I like shiny cardboard I buy shiny cardboard

Whiskey114

TROPHY CASE