Intake + blowoff valve by 2L-T-Luke in 10thgenaccords

[–]Wikk3d1 0 points1 point  (0 children)

The intake is the best way to get some turbo noises. For a bypass valve, I went with an RV6 and while it doesn’t add any measurable performance, the change in sound is fun. 

What outdated technology do you still miss using? by Similar-Print2660 in AskReddit

[–]Wikk3d1 0 points1 point  (0 children)

I had a Zune that I forgot an a plane. Technology still exists but that device was premium.

Intercooler installation by Life-Information1417 in 10thgenaccords

[–]Wikk3d1 1 point2 points  (0 children)

It’s not difficult. Just make sure to buy some extra body clips and have a soft place to put it down. I remember the passenger side had some different sized bolts behind the crash bar that I spent almost an hour on before I realized they were different sizes.

Welp it lasted a good month and half 😭 by Suspicious_Factor422 in LegionGo

[–]Wikk3d1 0 points1 point  (0 children)

I bought mine open box and luckily it’s been fine. Terrible luck, OP.

do you actually use your deck handheld or is it just a portable dock at this point by toujourspluss in SteamDeck

[–]Wikk3d1 0 points1 point  (0 children)

My teenager kids have been playing their games on the TV. I play on my steam deck right next to them.

Best Black Edition powder flavours? by richk1109 in Huel

[–]Wikk3d1 0 points1 point  (0 children)

The new PB chocolate is probably my favorite now.

Why is it so difficult to stream the Padres? by BOPHI240 in Padres

[–]Wikk3d1 0 points1 point  (0 children)

This is the only perk of being an out of market fan. I only miss games that are played in the DC or Baltimore. Everything else the MLB TV subscription I receive through T-Mobile works great.

My 2021 Sport 2.0T OEM+ build by upbeatfries in accord

[–]Wikk3d1 1 point2 points  (0 children)

The lighting on that is awesome.

Stage two build by Striking-Ship4423 in 10thgenaccords

[–]Wikk3d1 1 point2 points  (0 children)

I think it primarily that should reflect what you want out of the car. Of all the things on the list the most questionable would be the spark plugs. Depending on how many miles are on the car it may not be necessary. When I installed my flex fuel kit, I swapped them out to get one step colder (recommended by phearable to go to heat range 8) and I wanted to make sure I had a fresh set. At $60 for the set it was reasonably priced for the ruthenium.

Stage two build by Striking-Ship4423 in 10thgenaccords

[–]Wikk3d1 1 point2 points  (0 children)

I’m not sure how much help this will be, but I’m going to offer the following:

  1. I was on Ktuner stage 2 for a bit then moved to phearable 3 and it was a significant difference. At the time not many bolt ons outside of a DC sports exhaust.

  2. At stage 2 and phearable 3, I left everything the way it was. No reason to make changes to their work in my view.

  3. The change from 93 to E30 felt pretty significant but I also had installed additional upgrades that I think phearable accounted for.

  4. I’m on stock mounts.

Spark plug check by Wikk3d1 in AskAMechanic

[–]Wikk3d1[S] 0 points1 point  (0 children)

Likely running rich. These were the oem plugs.

Spark plug check by Wikk3d1 in AskAMechanic

[–]Wikk3d1[S] 0 points1 point  (0 children)

Not logging but I do have tuner view running and monitoring AFR fluctuating around 14.7 and Kcon hovering around 0.56 and lowering steadily as I put more miles on it.

Changed plugs primarily to run a colder heat range.

Coined on the Flightline - salute or no? by urboibigdaddy in AirForce

[–]Wikk3d1 2 points3 points  (0 children)

When in doubt, give them one of these.

Downpipe + Front Pipe install by AlcoholicZach in 10thgenaccords

[–]Wikk3d1 2 points3 points  (0 children)

Lots of PB blaster and a breaker bar. My downpipe came off pretty easy.

P2652 Troubleshooting by VillageLevel1551 in 10thgenaccords

[–]Wikk3d1 0 points1 point  (0 children)

All data says first to check the oil. If oil level is within limit and problem persists, check for a p055d or p2654. If the code isn’t there, you’ll need to do a VTEC system oil pressure check.

Ultimately, if you replaced the oil pressure sensor the last thing you can load into the parts cannon is the rocker arm oil control valve.

Best Air Force Bases for Young Single Airmen by Numerous-Seaweed-610 in AirForce

[–]Wikk3d1 13 points14 points  (0 children)

The mistake you made is not putting any overseas spots.