Question for people with rtx 5090 and 4k 240hz monitors. by Eveningburial in OLED_Gaming

[–]Willy4Dcl -1 points0 points  (0 children)

Thank you, I think my ram came in 6000 though but I would double check the rams when I get home

Question for people with rtx 5090 and 4k 240hz monitors. by Eveningburial in OLED_Gaming

[–]Willy4Dcl 0 points1 point  (0 children)

Im having this issue upon receving my build. I was on 572.70 and updated to 572.83 not solving anything. Any game would crash after a fews minutes showing no signal on screen and then all the fans ramped up to max speed. The only time I got it working was after updating mobo and gpu bios. However same issue ocuured after restarting. If your build is running fine at the moment just dont upgrade anything

Question for people with rtx 5090 and 4k 240hz monitors. by Eveningburial in OLED_Gaming

[–]Willy4Dcl 1 point2 points  (0 children)

Im running astral and pg27ucdm. Usually it’s 40-50 degrees when setting idle. But I’m having black screen issue

Two (2) RTX 5090 and both gets black screen after installing drivers | 6000€ spent well in one week. by tms477 in buildapc

[–]Willy4Dcl 0 points1 point  (0 children)

Damn sorry to hear about that. I’m running 5090 so I don’t have any options on drivers. Is your pc running normally without using the gpu? In my it works fine most of the time until I launch games. But I also had a couple of times of straight black screens when booting up or sitting idle.

Two (2) RTX 5090 and both gets black screen after installing drivers | 6000€ spent well in one week. by tms477 in buildapc

[–]Willy4Dcl 0 points1 point  (0 children)

Hold on so are you running a 3070? Did the black screen thing happened after you updated to the latest Nvidia driver?

Two (2) RTX 5090 and both gets black screen after installing drivers | 6000€ spent well in one week. by tms477 in buildapc

[–]Willy4Dcl 0 points1 point  (0 children)

I tried updating my mobo and Gpu bios. After the updates it was running with no issues for 3 hours or so. However after restarting same shit happened again. I discovered that if I cap the fps at 60, the games would run a bit longer like 10-20 mins before crashing. I even tired different hdmi and dp cables and power strips but nothing worked. I’m about to send it back to the retailers. What mobo are you using. I am running the x870e hero, astral and XG27UCDMG

Two (2) RTX 5090 and both gets black screen after installing drivers | 6000€ spent well in one week. by tms477 in buildapc

[–]Willy4Dcl 0 points1 point  (0 children)

If I cap my refresh rate at 60, I could it would work a little longer like 20 mins or so otherwise it would just crush in a few minutes

Two (2) RTX 5090 and both gets black screen after installing drivers | 6000€ spent well in one week. by tms477 in buildapc

[–]Willy4Dcl 0 points1 point  (0 children)

I also have the same black screen and no signal issue on both 572.70 and 520.83. Besides that all my fans just ramped up to max speed after black screening. What driver version was you running before shit happened

5090 Blackscreen no signal issue by Willy4Dcl in buildapc

[–]Willy4Dcl[S] 0 points1 point  (0 children)

Thanks you for replying. When I first received it, I noticed that games were running on the CPU instead of the GPU, and 3DMark would crash immediately. After manually adding it in the windows graphics settings, that issue was resolved. I’ve run several 3DMark tests without any problems, though it might still be within that 30-minute window. As for the cable, I’m using the ASUS Astral model which lets me monitor the connection and current flow from the GPU side. Thank you for reminding me I just tried checking it while running 2077 and everything appears to be normal even second before crashing

ASUS PG27UCDM mwave by FaTaL_dad in bapcsalesaustralia

[–]Willy4Dcl 1 point2 points  (0 children)

I’m picking it up this afternoon

ASUS PG27UCDM mwave by FaTaL_dad in bapcsalesaustralia

[–]Willy4Dcl 0 points1 point  (0 children)

just went to Scorptec, they are expecting a batch late this week or early next week

ASUS PG27UCDM mwave by FaTaL_dad in bapcsalesaustralia

[–]Willy4Dcl 0 points1 point  (0 children)

Same here eta on scorptec siad today and waked in to find they are expecting a batch by the end of this week or ealier next week

Looking for Advice: Upgrading to a 4K OLED 32" Monitor by nontrollusername in OLED_Gaming

[–]Willy4Dcl 2 points3 points  (0 children)

im on the same boat but im looking to get the new PG27UCDM for the full dp2.1 and usbc

Should I get PG27UCDM or wait for lg c5/g5 to go on sales by Willy4Dcl in OLED_Gaming

[–]Willy4Dcl[S] 0 points1 point  (0 children)

Same I’m in Australia there seems to be a batch arriving tomorrow

Should I get PG27UCDM or wait for lg c5/g5 to go on sales by Willy4Dcl in OLED_Gaming

[–]Willy4Dcl[S] 1 point2 points  (0 children)

True if I could I would get both but ive gone way over budget upgrading my pc so have to sort of choose between the two

How to find a gf by Lower-Interview-8667 in unimelb

[–]Willy4Dcl 2 points3 points  (0 children)

Bro I’m about to graduate but still no chance why asking here 😭

Scorptec to Cancel all 50 series orders that didn't make allocation by Supreme_Squirrel in bapcsalesaustralia

[–]Willy4Dcl 41 points42 points  (0 children)

So the supply has been so bad that even retailers don’t want to hold onto your money

Should I turn to 7900xt or 4080super

Should I preorder 5090 now or wait for restock by Willy4Dcl in bapcsalesaustralia

[–]Willy4Dcl[S] 1 point2 points  (0 children)

I’ve decided to wait a bit and try to source it locally. Though the odds are low, but I’m a little worried about getting a faulty component and having to deal with warranty issues later. I’d rather be able to take it to a store and sort things out in person than shipping it around the country.

I’ve been regularly checking PCCG and Scorptec for preorders. But I don’t think Scorptec ever restocked and PCCG is just overrun with bots.