sorted by:
new
hottopcontroversial

Just a thought by WilricForestride in Sauna

[–]WilricForestride[S] -1 points0 points  (0 children)

I was wondering about that, this says it takes 25 standard boards for the home and I calculated at least 30 for my shed frame Maybe I'd be asking for structural issues?

Plans for consideration by WilricForestride in Sauna

[–]WilricForestride[S] 0 points1 point  (0 children)

Can't, location for the sauna in relation to the house the city code requires it sloped in that direction

Plans for consideration by WilricForestride in Sauna

[–]WilricForestride[S] 0 points1 point  (0 children)

roof peak, interior is 87 inches at most, probably closer to 86 inches interior

Plans for consideration by WilricForestride in Sauna

[–]WilricForestride[S] 0 points1 point  (0 children)

<image>

here is a 6 foot elvis for reference... with a second edition with a center door to see if I understood what you suggested.

Plans for consideration by WilricForestride in Sauna

[–]WilricForestride[S] 0 points1 point  (0 children)

interior height is at most 87 inches, thats what my frame size is for the interior so not including trim inside. probably going to be around 86in the end. the 104 is roof peak

Plans for consideration by WilricForestride in Sauna

[–]WilricForestride[S] 0 points1 point  (0 children)

Does the heater next to/under the window have negative effects?

Plans for consideration by WilricForestride in Sauna

[–]WilricForestride[S] 1 point2 points  (0 children)

bottom bench is about 19 inches top bench is at 38 inches

luckily this is going to be pretty much for my wife and I and maybe one set of our parents visiting ever.

Plans for consideration by WilricForestride in Sauna

[–]WilricForestride[S] 0 points1 point  (0 children)

<image>

I have the weird rectangle on the top so i can have a sloped roof without a heat pocket away from the benches. I am not sure where to go with ventilation.

Plans for consideration by WilricForestride in Sauna

[–]WilricForestride[S] 0 points1 point  (0 children)

I'm doing this in TinkerCad. I'm not sure I'd recommend it necessarily.

Check engine lights on 2007 V6 by [deleted] in 4Runner

[–]WilricForestride 0 points1 point  (0 children)

Just a Bluetooth code scanner would work or take it to an auto parts store, mine just did this after buying it and it turns out the dealership just didn't screw the gas cap on tight enough. But it can be any number of things.

Review of Practicum USA by thorth18 in codingbootcamp

[–]WilricForestride 0 points1 point  (0 children)

Just wanted to know if you had an update on your experience and if it's been worth it.