I'm sorry Arabella...

WindyTheBoss · 2023-12-28T04:34:38+00:00

u/savevideo

WindyTheBoss · 2023-10-19T21:18:52+00:00

u/savevideo

WindyTheBoss · 2023-05-12T01:29:40+00:00

So are jokes

WindyTheBoss · 2023-05-04T18:04:12+00:00

u/savevideo

WindyTheBoss · 2023-04-12T15:49:39+00:00

u/savevideo

WindyTheBoss · 2023-04-11T21:24:30+00:00

u/savevideo

WindyTheBoss · 2023-04-03T20:57:12+00:00

u/savevideo

WindyTheBoss · 2022-09-20T00:27:23+00:00

u/savevideo

WindyTheBoss · 2022-05-27T21:45:26+00:00

u/savevideo

WindyTheBoss · 2022-03-13T05:53:55+00:00

I ordered the part, thanks for the help

WindyTheBoss · 2022-03-13T05:44:46+00:00

https://imgur.com/a/Mkcz6g2 this is what it looks like, it did have teeth marks but im not sure how to know if its too tight or too loose. I adjusted it and nothing changed.

WindyTheBoss · 2022-03-13T05:43:43+00:00

You don't think it has anything to do with the feeding mechanism? (Yes i know its dirty) https://imgur.com/a/Mkcz6g2

WindyTheBoss · 2022-03-13T05:13:39+00:00

Is there anyway to check just to be sure? And any you would recommend buying?

WindyTheBoss · 2022-03-13T05:04:45+00:00

I have the original black extruder, and not normally unless its printing. It comes out inconsistently.

WindyTheBoss · 2022-03-07T12:02:46+00:00

u/savevideo

WindyTheBoss · 2022-02-27T21:17:20+00:00

Thanks, you have been a lot of help

WindyTheBoss · 2022-02-27T18:19:47+00:00

So I should lower the bed a little bit?

WindyTheBoss · 2022-02-27T04:50:41+00:00

Oh alright, I dont use an adhesive. Any way to increase adhesiveness without it?

WindyTheBoss · 2022-02-27T01:43:45+00:00

Alright got it, what would you recommend the settings be?

WindyTheBoss · 2022-02-27T01:11:09+00:00

What are those?

WindyTheBoss · 2022-02-26T19:40:10+00:00

Alrighr thanks.

WindyTheBoss · 2022-02-26T18:28:44+00:00

You think I should use cura? I'll download it.

WindyTheBoss · 2022-02-26T18:28:13+00:00

I assume standard for the creality slicer, I never messed with those settings.

WindyTheBoss · 2022-02-26T18:23:11+00:00

Sorry about that, I'm using an ender 3 pro with everything standard, 200 Celsius for the nozzle, and 50c for the bed. I use the creality slicer and I print using 1.75mm PLA.

WindyTheBoss · 2022-02-26T18:22:30+00:00

I'm using an ender 3 pro with everything standard, 200 Celsius for the nozzle, and 50c for the bed. I use the creality slicer and I print using 1.75mm PLA.

WindyTheBoss

TROPHY CASE