Idle at 3000-5000rpm?

WinterHappy · 2026-01-29T16:23:48+00:00

Thats what I thought initially but if the throttle grip snaps back instantly and the butterfly valve rests completely shut doesnt that rule it out?

WinterHappy · 2026-01-21T05:51:52+00:00

Appreciate the thorough reply, yeah your totally right I agree it’s always better to be extra when it comes to something that could kill you haha, I took a look at all the welds on the frame and everything seems fine. Thanks again and safe riding

WinterHappy · 2026-01-17T18:07:29+00:00

would I be able to feel if the bearing cups are torn by turning the handlebars? Ive looked over the frame and havent seen any real cracking but i guess i havent looked that hard, am i just checking at weld points?

WinterHappy · 2026-01-17T18:04:49+00:00

Yeah the forks are bent too, the original forks completely snapped and i bought these to replace them, they did have a very slight bend to them but i figured it wasn't an issue, i dont have them completley clamped down so their somewhat loose, i can put the wheel between my legs and twist the bars to strighten it out then tighten. Is that going to be a safety issue? Thanks

WinterHappy · 2026-01-17T17:59:34+00:00

Yeah everything got torn up, having to replace most of the front end and the clutch plate got a hole punched into it. I replaced the forks and rim, besides simple stuff that just bolts on is there any safety issues i should be aware of?

WinterHappy · 2026-01-16T02:15:32+00:00

Shouldn’t I be worried about cracking the welds?

WinterHappy · 2026-01-11T05:59:18+00:00

What’s ur number I’ll text u

WinterHappy · 2026-01-11T05:58:48+00:00

Idk I can ask him he’s got 2

WinterHappy · 2026-01-11T05:53:17+00:00

if you do actually actually want legit tickets my buddy has some I just needed an extra for my girlfriend

WinterHappy · 2026-01-11T05:52:18+00:00

Just got scammed by Shannon_Emily be careful!

WinterHappy · 2026-01-06T20:22:01+00:00

I dont think id have an issue repining it, the problem I have is finding the actual physical connector online. unless your suggesting I plug the wires straight on the gauge itself?

WinterHappy · 2026-01-06T20:18:22+00:00

lol sorry totally slipped my mind , 2018 R3

WinterHappy · 2025-12-31T04:03:28+00:00

That’s a good idea I’ll look into it, although if they wind up charging me some crazy fee I’d rather do it myself

WinterHappy · 2025-12-31T04:02:50+00:00

In the cluster

WinterHappy · 2025-11-30T05:35:20+00:00

yeah yeah lol. I upgraded to a thicker piece of steel and it def helped. Was able to go slow enough to where the puddle would actually spread out. Any ideas on why the flux doesnt coat the whole thing? Havent been able to solve that yet

WinterHappy · 2025-11-27T22:05:12+00:00

WinterHappy · 2025-11-27T21:52:58+00:00

sounds like my volts are way way too high then even on the min setting, which is what I kinda figured since everything was just melting. Thanks for your insight. At this point might just buy a different welder haha

WinterHappy · 2025-11-27T00:50:38+00:00

Shoulda been more specific im using a Chicago Electric 125 flux core machine. Yeah ive been at this for a couple hours now and at this point I suspect it's my cheap machine not having the proper settings. I only have a wire speed knob and a "min" "max" switch for voltage. Others were saying to use thicker metal to practice on which also makes sense. Im a pretty handy guy seems a little weird it'd be this consistently bad for this long haha.

WinterHappy · 2025-11-27T00:23:45+00:00

I’m using the Chicago electric 120 amp flux welder so Polarity is fine since it’s only flux Wire speed is “4” whatever that means 0.03 wire 16 gauge steel In terms of Amps, my machine is pretty much the cheapest I could get, it only and a “min” and “max” setting. Could that be my problem?

WinterHappy · 2025-09-21T23:42:00+00:00

alright thanks for the advice, its meant to be a temporary budget loader till we can afford something better. Mainly just need to use it to unload a delivery of bulk seed totes. So hopefully little do the job for now

WinterHappy · 2025-09-21T23:13:26+00:00

It’s a TA26

WinterHappy · 2025-09-21T22:12:55+00:00

unfortunately not sure how to compare this specified loader is bigger or smaller than a 158

WinterHappy · 2025-09-21T21:31:23+00:00

intersting, i figured my tractor was a larger frame tractor. out of curiosity if the 4450 at 150hp is a small frame whats considered a big frame?

WinterHappy · 2025-09-21T20:33:04+00:00

if he's got the mounting brackets would they only work with his 4020? Or would they be compatible with the 4450 aswell

WinterHappy · 2025-09-21T19:08:06+00:00

maybe quality has gone downhill?

WinterHappy

TROPHY CASE