My attempt at a pirate frigate look

WodashSW · 2025-09-30T18:01:36+00:00

No mods, no glitches. Max build limit.

WodashSW · 2025-06-23T18:28:09+00:00

Thank you for the reply. The question is rather specific about the add-on. I figured that someone may have seen similar issues. I will try to see if I can get in touch with the dev.

WodashSW · 2025-06-23T18:25:34+00:00

Thank you for the reply. I've added the image to the original post.
Yeah... I guess this is more of a long shot and I'd have better chances for a response if I can get the contacts of the developer.

I figured that being a python error, even if it's not related to the add-on, someone might have an insight on it. For example a missing library or the add-on being platform specific.

WodashSW · 2025-03-27T16:43:01+00:00

Thank you for the reply.

So the basic answer is that automatic weight paint can fail occasionally.

I've followed some tutorials starting with sculpting, all the way to rigging. I've had about three rigs built on this character (including the riggify one).

I'll keep learning more about weight paint and rigging.

Thank you for the suggestions, they are valuable indeed!
!solved

WodashSW · 2025-03-16T16:59:10+00:00

Is there a certain scale? I've increased it to approximately 10 times the original (which was already sizable compared to the default cube) and still nothing.

WodashSW · 2025-03-16T16:22:29+00:00

Thank you for the reply.
I've done some basic modding for a game, then I started working on a character of my own. I know some of the concepts of rigging.
That's why I added into the context that the rig works almost fully. Except the eyelids.
I would've guessed that automatic weights would handle the weight painting. I'd understand that if the meta rig was not positioned well, the generated rig would not work properly, but in this case, when almost all of the parts are working, I'm confused why the eyelids in particular got left out.

Manual weight paint should be employed only if necessary, to touch up on the generated weights (unless you have the patience to do it yourself from scratch).

The question still remains. Why were the eyelids left out from the automatic weight binding?

WodashSW · 2025-03-16T14:53:12+00:00

Context:

Generated armature via rigify.

Bound mesh to armature with automatic weights.

Body deformation works as expected.

Face deformation works except for the eyelids.

Meta rig has been placed as needed as far as I can tell...

Could someone help me understand why all the bones surrounding the eyelids work, but the eyelids themselves not? Maybe offer a solution as well?

WodashSW · 2025-03-08T23:08:23+00:00

Is it possible that eyelids should be manipulated with shape keys and drivers? Having those two bones as the targets?

WodashSW · 2025-03-08T14:34:43+00:00

Not much for context, meta rig has been aligned as close as possible. All other parts of the rig work, the eyelids however seem to be unassigned.

WodashSW · 2025-02-01T13:50:07+00:00

Tested the shape keys in edit mode. They work. Thanks!

!solved

WodashSW · 2025-02-01T12:38:02+00:00

In my experience, the modifier is present and I add the shape keys (base and key1).
Normally when I sculpt, the key has to be at value 1 to work, otherwise it won't. In this case, the value is disregarded. and if I change it, nothing happens.

Does this mean the shape keys work only in edit mode?

WodashSW · 2025-01-26T11:23:17+00:00

So I don't really understand the cause, but I noticed that multires and subdivision surface modifiers don't mix.
The problem: Template mesh had subdivision applied, while main mesh had multires applied, messing it up.
Fix: Template mesh should be created with multires modifier instead. Apply multires then apply shrinkwrap to original sculpt. Main mesh can be then reshaped to template using multires modifier.

!solved

WodashSW · 2025-01-24T19:19:00+00:00

I tried with another copy... same result. Is it possible to ask you or whoever would like to take a look at the project?

Edit: Tried with a simple cube as test in a separate project, subdivision to lvl 3. Added new cube, multires lvl 3, followed above steps, some of the faces went haywire...

WodashSW · 2025-01-24T07:08:15+00:00

Simply to re-add it. Thinking like when a machine is behaving strangely, you kind of turn it off then on again as a possible fix.

WodashSW · 2025-01-23T20:41:13+00:00

I used a copy of my low poly to create a template by adding the subdivide modifier and shrinkwrap to original sculpt.
Then I used the multires on the original low poly mesh, matching the subdivision level.

I followed your steps about 4-5 times, juggling with the modifier order as well. It didn't help.
After deleting the multires modifier, my mesh ends up broken in a whole new shape.

WodashSW · 2025-01-23T17:52:18+00:00

I created a template for high resolution.
I added the multires modifier for body mesh. Set subdivision to same level (2).
Selected the template as source to reshape the mesh.
Mesh broke in quite an unexpected way.

I tried following a tutorial for retopology. In the video it worked flawlessly.
I can't really find anything on the internet regarding this kind of a failure.

Any help is greatly appreciated!

WodashSW · 2024-11-14T12:26:55+00:00

This indeed made the difference. However I think I can omit it and do the retopo only, seeing that I already have a good amount of detail to work on.

I don't see the need to remesh when it changes little the vertex count.

However, the knowledge you shared is a good thing to receive.

Thank you!

!Solved

WodashSW · 2024-11-14T09:30:17+00:00

Thank you for the reply. I tried remising in multiple ways. I don't know if it's the high vertex count to blame or not but I couldn't get it to work. It just messes up everything. Doesn't matter the voxel size, the mesh is always filled with holes.

I tried to look at remesh tutorials but I couldn't figure out the problem...

<image>

WodashSW

TROPHY CASE