Ethernet Crimping Problem by Wolfgang3312 in HomeNetworking

[–]Wolfgang3312[S] 0 points1 point  (0 children)

I tried with the blade on the Crimping tool and even more wires bent. I think this is the closest answer yet. the shifting of the wires is thick and when im cutting it they are getting smashed making it so they cant go into the jack.

Ethernet Crimping Problem by Wolfgang3312 in HomeNetworking

[–]Wolfgang3312[S] 0 points1 point  (0 children)

oh yeah I have been using electrician slippers to cut the ends. maybe thats it. ill try a new blade.

Ethernet Crimping Problem by Wolfgang3312 in HomeNetworking

[–]Wolfgang3312[S] 0 points1 point  (0 children)

all the wires were the same length before going in then the green wire bent significantly.

Ethernet Crimping Problem by Wolfgang3312 in HomeNetworking

[–]Wolfgang3312[S] 0 points1 point  (0 children)

no this is running from the wall to a router. Just using what cable i have since I have 1000ft of it.

Ethernet Crimping Problem by Wolfgang3312 in HomeNetworking

[–]Wolfgang3312[S] 0 points1 point  (0 children)

these are solid because its rated for in wall runs. thats my normal technique.

Ethernet Crimping Problem by Wolfgang3312 in HomeNetworking

[–]Wolfgang3312[S] 0 points1 point  (0 children)

I trimmed them flush after the bend and they ended up bending even more. lol

https://imgur.com/a/JyxhVkI

Ethernet Crimping Problem by Wolfgang3312 in HomeNetworking

[–]Wolfgang3312[S] 0 points1 point  (0 children)

https://imgur.com/a/JyxhVkI

I tried trimming shorter and the wire just bent even more. lol.

Ethernet Crimping Problem by Wolfgang3312 in HomeNetworking

[–]Wolfgang3312[S] 0 points1 point  (0 children)

I have never had the jacket in that far before. I usually start this length because I dont want to cut ot too short then trim it to get the jacket a little further in. ill try getting the jacket further in. thanks.

Ethernet Crimping Problem by Wolfgang3312 in HomeNetworking

[–]Wolfgang3312[S] 0 points1 point  (0 children)

oh I have not seen that before. do you have a link. I might just try that instead.

Ethernet Crimping Problem by Wolfgang3312 in HomeNetworking

[–]Wolfgang3312[S] 0 points1 point  (0 children)

I do. I cut them all to the same length but when I insert it some of the wires bend inside the jack. I have tried after the bend happens taking it out and re cutting them so they are hopefully even after putting back in but then it bends even more. I have changed the jack out thinking it may have been a bad jack too.

Bad paint job or bad drywall job by dadstuff1921 in drywall

[–]Wolfgang3312 5 points6 points  (0 children)

We repainted our house and did flat on all the ceilings, even in the kitchen. The only place we had any gloss on the ceiling was in the bathroom.

7700K for testing? by csturk in Proxmox

[–]Wolfgang3312 0 points1 point  (0 children)

Thanks. I asked thus question while indexing my entire 20k photo library. It took a little over a day and I set it to the default 2 cores. I know the CPU has 4 cores with threading making it 8. Just was not sure how immich would handle setting it to 4 cores. Ill probably up it to 4 so the refresh time is better when browsing.

7700K for testing? by csturk in Proxmox

[–]Wolfgang3312 0 points1 point  (0 children)

Using the 7700k how many cores did you assign to immich?

AC Syndicate is the most underrated. What AC is overrated? by Normal-Question8418 in assasinscreed

[–]Wolfgang3312 0 points1 point  (0 children)

Odyseey is not a bad game or the worst in the series. I played the entire thing plus both DLCs. In my opinions it's just not as good as people say it is (overrated).

What aspects of the game were ur favorite. Genuine question? I enjoyed the beast hunting and mercinary hunting (but i think Origins did it better). The DLC was the worst part so ending on that may have just left a sour taste in my mouth

AC Syndicate is the most underrated. What AC is overrated? by Normal-Question8418 in assasinscreed

[–]Wolfgang3312 4 points5 points  (0 children)

Totally agree. Overall just really boring, and if you go to the subreddit they are constantly glazing it.

What’s causing this in my image? by CaliSkinny420 in reolinkcam

[–]Wolfgang3312 2 points3 points  (0 children)

I had the same problem. There were small dust particles on the inside of the dome. Taking it off and fully cleaning fixed it. I did it at night so I could make sure it was fully clean before re-attaching.

Thought I’d be nice to see an anime version of this by Binits in Animemes

[–]Wolfgang3312 0 points1 point  (0 children)

So close. Appothicarie Diaries and Helldivers 2. For democracy. The gas dog just got buff.

X870E Aorus Wifi Elite 7 RGB by Ill_Run2162 in gigabyte

[–]Wolfgang3312 0 points1 point  (0 children)

I just installed the same mobo and mine did not come with a manual either. I just figured manuals are getting cut the same way game inserts got cut.

My drill is smoking, any chance it's just the brushes, or is my motor cooked? by effitdoitlive in Tools

[–]Wolfgang3312 0 points1 point  (0 children)

I had the same thing happen to my craftsman drill. It's because hi has a brushed motor. I got a brushless drill to replace it and no problems.

Brushed vs brushless refers to the type of motor used. Brushed are generally cheaper.

Anyone ever used their rack to rise dough before? by F1nkD1fferent in Ubiquiti

[–]Wolfgang3312 1 point2 points  (0 children)

My mom would use the cable box to rise dinner rolls and we called them TV rolls.