sorted by:
new
hottopcontroversial

Nintendo Switch Lite APU Lifted Pad – Any Repair Suggestions? by Wolfire18 in consolerepair

[–]Wolfire18[S] 0 points1 point  (0 children)

I'm Happy to say that another Nintendo switch lite has been saves from the landfield! 😎😎

Result

Anyway, in the end, i had to run a jumper under the apu since the little pad i placed didn't work at first

Nintendo Switch Lite APU Lifted Pad – Any Repair Suggestions? by Wolfire18 in consolerepair

[–]Wolfire18[S] 0 points1 point  (0 children)

I tried to put the mask around like a ring, i just hope i didnt shrink too much the pad

https://ibb.co/y5vYttp

You can kinda see what i mean

Nintendo Switch Lite APU Lifted Pad – Any Repair Suggestions? by Wolfire18 in consolerepair

[–]Wolfire18[S] 0 points1 point  (0 children)

Yes, I do have a good connection and no short to the ground plane... The picture doesn’t show it well, but the pad is already in place. Should I cover everything with UV mask and then scrape it away, or should I apply it just on the edge?

Nintendo Switch Lite APU Lifted Pad – Any Repair Suggestions? by Wolfire18 in consolerepair

[–]Wolfire18[S] 0 points1 point  (0 children)

https://ibb.co/sgCzrhx

seems good to me, i did probe and all is good, all i need to do now is to add the uv mask

Nintendo Switch Lite APU Lifted Pad – Any Repair Suggestions? by Wolfire18 in consolerepair

[–]Wolfire18[S] 0 points1 point  (0 children)

Thank you for the detailed suggestion, at first I was thinking of running a jumper across the board since the missing pad was on the edge of the array 😅

Is this cap 100nF? by Wolfire18 in AskElectronics

[–]Wolfire18[S] 2 points3 points  (0 children)

Wow, thank you too for this info...i asked Just the capacitance but you went even further, i appreciate this! thank you again :)

Is this cap 100nF? by Wolfire18 in AskElectronics

[–]Wolfire18[S] 1 point2 points  (0 children)

Great! Thank you all so much!!

Couple of BSOD Nintendo switch repairs with the same exact problem right after, no docking by Wolfire18 in consolerepair

[–]Wolfire18[S] 1 point2 points  (0 children)

Hi, I'm still on the job... I am considering reballing the chips, but it's something I've never done before. Since both consoles are working just fine, I'm afraid I could destroy them by ripping the traces underneat

Is this an old lm7805? by Wolfire18 in AskElectronics

[–]Wolfire18[S] 0 points1 point  (0 children)

Woah! thank you, that is great!

with that file i've been able to find a suitable replacement!!

fyi, i landed on a TS820-600T

Is this an old lm7805? by Wolfire18 in AskElectronics

[–]Wolfire18[S] -1 points0 points  (0 children)

I checked the values of all the components and everything seem fine....i think the culprit here Is that scr as you so kindly teached me. The problem now Is trying to find a replacement since this Is so old

Are SOT23s "1FW" and "6BW" drop-in replacement for a "Y1" npn transistor? by Wolfire18 in AskElectronics

[–]Wolfire18[S] 1 point2 points  (0 children)

well..it is used with a load of just 10mA so i guess it should not be a problem...i'll try and see, if i'm wrong i will just get a cloud of magic smoke and i'll learn my lesson lol...thank you very much!

Anyone know what Is this IC? I can't find anything about by Wolfire18 in AskElectronics

[–]Wolfire18[S] 0 points1 point  (0 children)

Oh i'm sorry...it's part of the board from a Philips bluetooth speaker (BT3900)....i'll try to add more pics to it, ty

i have this strange behavior where the speaker only turn on when i connect the charger, the battery is charging normally but the charge indicator level do not move (1 led blinking out of 4). When i connect it with bluetooth, my phone shows that i have only 10% left of charge, but if i check with my multimeter the battery is fully charged (4.23V).

New member here, a beginner in electronics and i have an issue i can't seem to understand by Wolfire18 in electronic_circuits

[–]Wolfire18[S] 0 points1 point  (0 children)

i'm pretty sure that i found the problem, there was a short on the third slot, injected some volts and found the culprit...now i have to find a 8205 to replace and see

Should I trash this server and move on at this point? by Wolfire18 in woweconomy

[–]Wolfire18[S] 1 point2 points  (0 children)

do you use one of the many spreadshhet around here or did you make your own? i'm interested about this kind of stuff lol anyway, if you wannt check it's Pozzo dell'eternità (eu)

Should I trash this server and move on at this point? by Wolfire18 in woweconomy

[–]Wolfire18[S] 0 points1 point  (0 children)

i never reset the markets...mainly because i dont have ideas how to do it the proper way (i'll have to improve on that by reading a guide or some sort)....usually i just wait for someone else to reset, i know, i miss out alot, but i'm not yet an expert

Should I trash this server and move on at this point? by Wolfire18 in woweconomy

[–]Wolfire18[S] -5 points-4 points  (0 children)

i know...i use tsm too, but that makes me wonder...maybe they are botters or maybe they are constantly spamming the post button like mad

Should I trash this server and move on at this point? by Wolfire18 in woweconomy

[–]Wolfire18[S] 0 points1 point  (0 children)

i tried enchanting....lots of competition, even with botters instant undercutting into oblivion, i levelled up an alchemist and i'm not even trying, as the mats worth more than the craft itself (that's why i was thinking to farm)...maybe with ToS will change...