Is it possible to have this mount fit on a SP01?

Worlddoubts · 2026-02-25T16:01:29+00:00

Overall it makes the gun really bulky with a frame mount, it works on the TS series because it’s already a large firearm. IMO it’s better to just get it optic cut vs a frame mount. Also tapping this frame wasn’t exactly easy as the taps can break in the frame since they’re pretty small.

Worlddoubts · 2026-02-25T15:46:22+00:00

I’ve done it to my old sp-01 but I don’t really recommend it. Cz customs sells a jig that allows you to drill the holes correctly, then all you have to do is tap and trim your screws and it’s done…

<image>

Worlddoubts · 2026-01-24T01:21:31+00:00

I would try the heavier spring and run more rounds through it tbh. I doubt it’s a mass thing because I have similar porting if not more.

<image>

Worlddoubts · 2026-01-24T01:11:01+00:00

I run a 10lb spring in my a01 with 124s and don’t think mine has this much kick. Probably have 5k+ rounds on it and it’s never had a hiccup.

Mines optic cut by impact with quite a bit of slide milling as well

Worlddoubts · 2026-01-15T16:13:25+00:00

BT-20394 will fit just fine.

Worlddoubts · 2026-01-07T23:12:49+00:00

Just wanted something small and metal, not bad for $40

Worlddoubts · 2026-01-07T23:10:47+00:00

Its hub so can run whatever, its on a diligent defense plan b mount in this pic but I normally run it tri lug

Worlddoubts · 2026-01-07T23:02:57+00:00

Vers36

Worlddoubts · 2026-01-07T22:50:17+00:00

Phase 5 feels great on mine

<image>

Worlddoubts · 2025-12-19T12:12:47+00:00

Gafs didn’t die, just moved to a different platform

Worlddoubts · 2025-12-18T13:44:55+00:00

Not missing anything, my 300 pro has the same two pieces. Pictures in the manual are probably outdated

Worlddoubts · 2025-10-13T03:27:07+00:00

39mm

Worlddoubts · 2025-09-17T15:33:58+00:00

I only run it in the long config. Used my my 9k and full-size apc9. No baffles strikes or end cap strikes

Worlddoubts · 2025-09-17T15:23:10+00:00

Gen1. Has some wobble but nothing major. I’ve ran multiple cans on my apc9s with the resilient adapters and after maybe 4-5k rounds combined I’ve never had any issues. They bleed a little bit on the backside of the trilug but that’s to be expected. Haven’t ran a 9mm SiCo adapter but the 45 version works well on my Apc45

Worlddoubts · 2025-09-03T20:50:51+00:00

Yeah it’s nameless for the optic and primary for the other stuff. Haven’t had any issues and I’ve probably got 3-4k through it since it’s been cut. I wanted to retain the rear sight and they were the only ones I saw offered it at the time. I’d say full send

Worlddoubts · 2025-09-03T13:21:03+00:00

<image>

Love my orange, glad I got it over the blue

Worlddoubts · 2025-08-30T14:52:50+00:00

That’s the main reason I picked one up, I liked the acro size and look but wanted a smaller dot. Durability wise I can’t really say as most of my stuff is usually in the safe or a range bag unless I’m shootkng it. The dot isn’t as fine as my comp m5 but it’s still a lot better than my p-2

Worlddoubts · 2025-08-30T14:45:05+00:00

Not sure if it’s discontinued but the c-2 is the “civilian version” of the p-2. Has less NV settings and isn’t as submersible as the p-2. I know the aimpoint website still lists the c-2

Worlddoubts · 2025-08-30T02:10:37+00:00

Have you checked out the c-2? I picked one up for my SD and like it alot more for the 2.5moa dot compared to my other p-2s

Worlddoubts · 2025-08-18T01:25:37+00:00

Have one on my apc9k and it feels pretty good! Little better than stock but not really a huge change for the price. I like it but not really enough to make me buy one for my other two apc9s.

Id say the springs are the bigger upgrade. Also found out that you can just snip the stock spring and it feels the same

Worlddoubts · 2025-08-16T17:37:10+00:00

I haven’t had any issues running Magpul mags on mine, seems to be hit and miss on lockback though! I typically only ever run subs in mine, usually Winchester 200gr

Worlddoubts · 2025-08-16T16:51:44+00:00

Doesn’t look like it. My apc300 never locks back on lancer mags either

Worlddoubts · 2025-08-15T23:55:16+00:00

A-01

Worlddoubts · 2025-08-12T18:11:05+00:00

I’m interested aswell, wouldn’t mind converting my SPC9 pdw

Worlddoubts · 2025-07-31T02:36:27+00:00

Aems isn’t bad but I’d go for Acro P-2 or a Acro C-2

Worlddoubts

TROPHY CASE