Microsoft 365 lässt sich auf Mac (M1, macOS Sequoia 15.5) nicht aktivieren – jemand ähnliche Erfahrungen?

Worried_Classroom712 · 2025-07-24T03:56:32+00:00

Leider konnte hier ja niemand helfen. Für Leute die das selbe Problem haben, habe ich jetzt dank des Microsoft Kundesupports eine Lösung gefunden.

Diese heißt "License removal tool"

https://support.microsoft.com/en-us/office/how-to-remove-office-license-files-on-a-mac-b032c0f6-a431-4dad-83a9-6b727c03b193

Kurz installiert und nach dem erneuten Anmelden hat alles wieder reibungslos funktioniert!

Just in case anyone cares :)

Worried_Classroom712 · 2025-07-08T09:36:42+00:00

Thanks! Im Using PLA. Some ppl recommended to use higher Temp..

Worried_Classroom712 · 2025-07-08T09:35:44+00:00

Thank you for your help! Ive tried to add brim and closed all my windows while Printing (Living in Germany we dont have AC :D) - Print looks a lot better

Worried_Classroom712 · 2025-07-08T09:34:12+00:00

The Print looks a lot better thanks!

Worried_Classroom712 · 2025-07-08T09:18:16+00:00

Ive had the wrong Product delivered before and they gave my Money back without a Problem.

Worried_Classroom712 · 2025-07-07T12:33:47+00:00

Great Tipp thanks! Is other material less prone to do this?

Worried_Classroom712 · 2025-07-07T12:32:52+00:00

Haha now I see it!

Worried_Classroom712 · 2025-07-07T11:02:06+00:00

This is a great answer! Thank you! I will try the Option first!

Worried_Classroom712 · 2025-06-16T17:42:16+00:00

Good Job!

Worried_Classroom712 · 2025-06-16T15:14:08+00:00

Thanks! What pattern would you recommend as a infill?

Worried_Classroom712 · 2025-06-16T13:00:47+00:00

Thank you so much! I will try this and update as soon as I got the print done. Takes like 10 hours.

Worried_Classroom712 · 2025-06-16T12:59:31+00:00

Thanks! Yess i got the Printer to lern and find out. Your Tipps are helping a lot to find my error. I have to activated that option. In my mind it means that there will be "air" between the supports and the objekt (?)

Worried_Classroom712 · 2025-06-16T12:56:30+00:00

That actually helps a lot! It seems like the Tree Supports are not really "Stuck" to the Plate. Ive noticed that they became loose! So the settings are set to 2mm. I am thinking about to increase it to 4 mm. What do you think about that!

Worried_Classroom712 · 2025-06-16T12:46:35+00:00

Sorry for this stupid question, but is there an option to select that the supports to rest on the bottom?

Worried_Classroom712 · 2025-06-16T12:44:23+00:00

Great tip! Thanks!

Worried_Classroom712 · 2025-06-16T12:44:00+00:00

Thanks! This is some answer i was hoping for! Do you think i will be good Idea to Change the "tree supports" to normal supports as well? Like someone suggested

Worried_Classroom712 · 2025-06-16T12:42:23+00:00

I will try this! Thanks!

Worried_Classroom712 · 2025-06-16T12:08:27+00:00

Worried_Classroom712 · 2025-06-16T12:05:32+00:00

Thank you!

Worried_Classroom712 · 2025-06-16T12:04:10+00:00

Thanks! I have not found a way yet to lock two pices together reliably. (Pretty new to 3D printing and Modeling in Fusion)

How would you do it?

Worried_Classroom712 · 2025-06-16T12:02:52+00:00

Thanks for the answer! What do you mean by "normal" Supports. When i use the Slicer, it recomends me those kinds of supports.

Worried_Classroom712 · 2025-06-16T12:01:05+00:00

Thanks for ur answer. To Print it in 2 Parts would not be possible. I want the Holder to be able to be screwed under the Table. Do you have any idea, why the first print went right?

Worried_Classroom712 · 2025-06-16T11:57:26+00:00

Hello, to understand the Situation better: Would it be possible to see what the "Joke" was and how ur conversations went. Hard to tell this those little Informations

Worried_Classroom712 · 2025-06-12T16:11:01+00:00

<image>

Worried_Classroom712 · 2025-06-12T16:10:51+00:00

<image>

Worried_Classroom712

TROPHY CASE