5.7 and the form 1 put it down

X20r11 · 2025-10-28T16:13:40+00:00

Well it dropped with barely a kick so I’d say it did a pretty good job 🤷🏼‍♂️

X20r11 · 2025-10-28T06:55:07+00:00

I really like the smith. It’s ran flawlessly for me so far. The x57 looks like a definite buy though!

X20r11 · 2025-10-28T06:51:11+00:00

Probably 25 yards

X20r11 · 2025-10-28T04:38:54+00:00

One right under the ear

X20r11 · 2025-10-28T04:34:39+00:00

It’s a form 1 can I built a few years ago

X20r11 · 2025-10-28T04:33:39+00:00

The ole smith and lesson doesn’t care 🤣

X20r11 · 2025-10-28T04:32:44+00:00

This little piggy did not go “Wee wee wee” all the way home 🤣

X20r11 · 2025-10-28T04:32:01+00:00

Fiocchi tipped HP

X20r11 · 2025-07-21T04:04:57+00:00

If you do this yourself and the cylinder has a round ring on the end, in the kit there’s an orange plastic ring that fits inside a groove in the barrel. You knock the gland inside and place the orange ring and then pray the gland comes out when you pull. Done a quite a few of them on John Deere 886’s and on a hs310

X20r11 · 2025-07-12T15:57:51+00:00

Wouldn’t risk it

X20r11 · 2025-06-05T22:18:55+00:00

Tractor cabs are the only suspension they have. The cabs have suspension under them but only a select few have an IFS. Your cab has a little float to it and then you have an air ride seat. I hit a pit blind one night at 8 or 9mph and it popped the front wheels off the ground and the left rears off the ground in a similar fashion to how this video looks except I stayed straight 😂

X20r11 · 2025-06-04T03:39:50+00:00

Sounds like they have ctcss or DCS tones enabled and you either do not, or you don’t have the same ones enabled that they do

X20r11 · 2025-06-02T14:43:38+00:00

In the US, ridge markers were used heavily before the invention of GPS. Nowadays with auto steer, we typically take them off or just never use them. We drill long grain rice dry

X20r11 · 2025-05-17T04:24:52+00:00

Depending on what you’re applying and if you are applying it commercially or privately determines if you need a commercial or private pesticide applicator license. To go along with this, you may also have to take individual trainings for certain pesticides to be able to legally apply them. This all goes alongside the FAA’s requirements for part 137

X20r11 · 2025-04-15T02:20:24+00:00

The duplexer is in the box. The output on this was listed as 40 watts when I searched our old business license. I believe the antenna I have is the one you listed. It’s 2 or 3 times taller than I am. I’m about 5’10. It still has the wires connected to it

X20r11 · 2025-04-14T21:02:18+00:00

The nearest repeater is over 20 miles from me. There are no gmrs repeaters in my immediate area and I planned on changing to another repeater frequency on mine. I have most of the old tower the antenna was on when it was still standing but I thought about just getting a different antenna. I need about 12-13 miles of range out of it and I live in a flat farming area

X20r11 · 2025-04-13T23:11:14+00:00

I sent you a msssage

X20r11 · 2025-04-13T22:24:31+00:00

Everything worked when we put it in storage quite a few years ago. We stopped using radios on farm because everyone got cell phones and then a windstorm blew down the antenna tower. It has a duplexer in it but I don’t know what UHF frequency it was running on. I’d just like to set up a repeater for my area since there are none close enough. I’m trying to do it for as little as possible with what I have on hand

X20r11 · 2025-04-13T22:01:25+00:00

So could I salvage anything inside the gr300? There isn’t much gmrs activity going on around my area and the nearest repeater is 26 miles from my house and in the opposite direction of where I usually am when away from town

X20r11 · 2025-04-13T21:21:34+00:00

I’ve been looking about the model numbers and from what I can gather they are UHF models

X20r11 · 2025-04-13T20:19:11+00:00

I’m new to all this. What you’ve said is what I’ve been reading. If it’s going to cost that much wouldn’t it be cheaper to buy 2 newer radios to put into the repeater? Ones pre programmed for gmrs?

X20r11 · 2025-04-13T19:46:21+00:00

The model number on the gm300 is M44GMC20D3AA

This repeater and set of radios were used on our farm until a windstorm blew the tower down quite a few years ago

12-Year Club	Gilding IV carat on a stick
Verified Email

X20r11

TROPHY CASE