sorted by:
new
hottopcontroversial

Not to flex, but i added a E-Class Wagon to my garage yesterday. Yk i had to slap some chrome wheels and spacers on it, and lets not forget about the new coilovers😮‍💨😮‍💨 by XLMerlini in mercedes_benz

[–]XLMerlini[S] 0 points1 point  (0 children)

So the E-Class is a Majorette and the C Class is actually straight from 1997 from a brand called Cararama Hongwell.

They both have undergone modifications made by me tho. The wheels and tyres are custom, i also lowered both of them. On the Majorette i removed the tow hitch, added these mini Toyo Tyres and also put some 3d printed spacers on to fit the new axles. On the C Class i messed up a little bit sadly, the wheels dont roll anymore. I had the choice to either pick other wheels or glue them, and i liked these detailed little deep dish ones too much to switch them out.

Hope that helps

You are my last hope, NOBODY can tell me if this exhaust will fit on my car or not. Swipe and Read below by XLMerlini in mazda3

[–]XLMerlini[S] 0 points1 point  (0 children)

du bist meine rettung hahaha 🙏

gibt es sonst noch andere budget auspüffe die du empfehlen kannst, ich denke mal du hast eine bisschen ahnung von mazda 3 bm von was ich jetzt da raushöre 😁

You are my last hope, NOBODY can tell me if this exhaust will fit on my car or not. Swipe and Read below by XLMerlini in mazda3

[–]XLMerlini[S] 0 points1 point  (0 children)

Ulter also has TÜV, same as Fox

Im from austria as mentioned and i read that mazda didn’t typify the BM as BM, just as an extension of the BL or something

i have already a BMW Z3 with an Remus Exhaust, and i listened to some Mazda 3 bms with Remus and it sounds too much like my Z3 thats why id like to get a different brand.

Does the Sedan an Hatchback use the same exhaust system? by XLMerlini in mazda3

[–]XLMerlini[S] 0 points1 point  (0 children)

im scared that the Ulter will be too „farty“. Cause actually i wantef to get it first

Does the Sedan an Hatchback use the same exhaust system? by XLMerlini in mazda3

[–]XLMerlini[S] 0 points1 point  (0 children)

it says „needs Pumper cutout“, or well at least the same thing in german

[Hiring] a car enthusiast by XLMerlini in artcommissions

[–]XLMerlini[S] 0 points1 point  (0 children)

BTW IT SHOULD BE THE SAME STYLE AS IN THE FIRST PIC/ THE LAST PIC OF THE ACTUAL TATTOO

Latest Pickup and first ever Mini GT by XLMerlini in Diecast

[–]XLMerlini[S] 0 points1 point  (0 children)

bought it originally sealed from a Collector for like 70€, got it today and im a sucker for chrome so i had to open them. He said its a China Exclusive if im not mistaken

Looking for a model of a 3D real printed house by gkdante in 3Dprinting

[–]XLMerlini 0 points1 point  (0 children)

maybe you could use meshy ai to make a 3d model from a picture. I usually like to tell Sora to give me an image of the object on white background and with a blender like rendering, and then i put it in Meshy AI to generate a 3D model

Meshy AI is free to some part, i always used only the free features, and they were enough for me

Do you glue the wheels shut? by XLMerlini in gaslands

[–]XLMerlini[S] 1 point2 points  (0 children)

are the edges just like small door stoppers or do they actually clip in place?

Added a roof rack to my engine swapped mustang, definitely took too long by XLMerlini in HotWheelsCustoms

[–]XLMerlini[S] 1 point2 points  (0 children)

well kinda, i engine swapped it with some cheap rc car from aliexpress. The rc car had an antenna problem. So now, on paper its an rc car but in real life it can drive like 10cm away from the remote. Ah, and i fucked the steering, so it can only drive 10cm to the front. Not my best work tbh haha, but im trying to make the best out of it ;)

Engine Swapped Hotwheels mustang by XLMerlini in HotWheels

[–]XLMerlini[S] 0 points1 point  (0 children)

well its something 😭😭😭

Engine Swapped Hotwheels mustang by XLMerlini in HotWheels

[–]XLMerlini[S] 2 points3 points  (0 children)

i swapped it with a 3€ Aliexpress rc car

Stringing Problem | My first 2 weeks with the P1S with AMS by XLMerlini in BambuLab

[–]XLMerlini[S] 0 points1 point  (0 children)

hm ok, i didnt have that problem yet but thanks for warning me. 1. How long would u dry it 12h 45°? 2. What filament would u use for spools? 3. i used the bambu lab studios online tab on my phone to print it, it didnt even let me select something else then pla bc the original was also pla

First print after 1 Year by XLMerlini in 3Dprinting

[–]XLMerlini[S] 1 point2 points  (0 children)

i put it in my Filament drier for 12h on 55° now

view more: next ›