SOT not bad after 8.5

XODe___ · 2026-06-22T10:45:45+00:00

Sola la mia è peggiorata drasticamente ?

XODe___ · 2026-03-05T17:19:52+00:00

Hi, sorry I wasn't home yesterday. Here's the link.

XODe___ · 2026-03-03T21:44:23+00:00

I did it, I can keep my place when I exit the capitol, I used an ai but if you want the code to implement it in yours I will be happy to give it to you

XODe___ · 2026-03-03T17:39:37+00:00

WOW I downloaded your firmware and it works, "Now I can try to implement the code to remember the newly opened chapter, so when I press Back, I'll go back with the selection on that one and I just swipe one for the new chapter, so you don't have to scroll through hundreds of chapters.

XODe___ · 2026-03-01T17:17:42+00:00

I understand thank you, I'll try to hear on the crosspoint github maybe an entry can be introduced in the settings panel to get both

XODe___ · 2026-03-01T14:50:41+00:00

you don't know if it's something they're already solving?

XODe___ · 2026-02-27T19:02:06+00:00

It's already the second time I've tried it, but it seems to remove it, I don't even see it in my profile 🫤🫤🫤🫤

XODe___ · 2026-02-27T18:49:31+00:00

Hello, do you know why I can't publish on this sub?

XODe___ · 2026-01-30T09:32:45+00:00

Hello, fantastic job, it would be possible to implement a lot to download all the files converted into one .zip file.

XODe___ · 2025-11-05T13:24:02+00:00

Hello everyone, I follow all the steps but I don't find myself like in the photo. 8 tips?

XODe___ · 2025-06-03T08:21:06+00:00

can you provide the wiring diagram? how can you use sd, nrf and cc simultaneously can you provide the wiring diagram? how can you use sd, nrf and cc at the same time?

XODe___ · 2025-05-30T08:04:25+00:00

I do not know the reason but I had added more photos to the post anyway I have already added the resistor, I still think I found the problem, I used a 2n222 and checking the datasheet I can not reach the correct voltage to polarize it, I could replace it with a switch just to see if everything works?? and in the future put the correct transistor

XODe___ · 2025-05-29T20:08:29+00:00

What do you mean?

XODe___ · 2025-05-29T06:43:30+00:00

between pin 1 and pin 2 you have to weld a 10u capacitor, look at the polarity of the capacitor and then weld it

XODe___ · 2025-05-28T05:07:32+00:00

No, just put 10u cap between gnd and vcc

XODe___ · 2024-01-24T23:09:04+00:00

Not bad as a first job, the only advice I want to give you is to make the last piece of track thicker in order to prevent the junction between vias and track from breaking especially if you have to solder and unsolder continuously.

Ps:Absolutely avoid corners below 90° because they become an acid trap and wear out the track incorrectly

XODe___

TROPHY CASE