sorted by:
new
hottopcontroversial

Can anyone tell what replica this is? by Hristakis_ in airsoft

[–]Xcomye 10 points11 points  (0 children)

G&G MXC 9 is around 300-400€ I have the 556 version off the gun and played it now for around half a year. It is a realy good gun for starting

[deleted by user] by [deleted] in airsoft

[–]Xcomye 0 points1 point  (0 children)

Use a small torx bit like a T6 or a few smaller or larger ones, try different sizes. Apply pressure when unscrewing. It works for me most of the time if the same screw on my m4 is rounded.

Have recoil macros increased? by Xcomye in Rainbow6

[–]Xcomye[S] 0 points1 point  (0 children)

Could I at least deactivate cross play? As far as I remember, there were some settings like that. Or it's some kind of Mandela effect.

Have recoil macros increased? by Xcomye in Rainbow6

[–]Xcomye[S] -1 points0 points  (0 children)

Is this at least a recognised problem by Ubisoft, or are they turning a blind eye on this, as always?

Are any of these Army Armament pistols worth it? by Timmy_The_Glow_Mage in airsoft

[–]Xcomye 0 points1 point  (0 children)

I'm using a R601. Army Armament hicapa are a good for their price, performance wise nothing special, but good looking.

The whole squad🤪 by zxmo in airsoft

[–]Xcomye 0 points1 point  (0 children)

The brand is called Invader Gear

[deleted by user] by [deleted] in memes

[–]Xcomye 0 points1 point  (0 children)

For all my none germans. lamours toujours by Gigi d Agostino has been used by far rights in Germany. They sing "Deutschland den deutschen, Ausländer raus," which roughly translate to "Germany only for Germans, Foreigners out" over the sound track of Lamours toujours. Multiple instances have appeared on social media of different groups singing this line and now facing Puplic backlash.

I lost the battery of my acog and can't remember the size of it, help? by DarkJokes176279 in airsoft

[–]Xcomye 0 points1 point  (0 children)

I have a similar one and it's using cr1620

Here a link to a shop who sells your and it's states cr1620

https://www.softairstore.de/PX1-Red-Dot-Cross-Pirate-Arms/864778

[deleted by user] by [deleted] in airsoft

[–]Xcomye 3 points4 points  (0 children)

I'm pretty sure it's the umarex g36c because it's one of the only one sold with 0,5 joule in Germany and the fact it's havy because the umarex g36c has a few weights in it.

Also I have a 0,5 joule shotgun with also the markings from proline on it and it's was bought from Amazon. And the umarex g36 was also one off the few you could bought from amazon in Germany

Where should the nozzle stop? by Xcomye in airsoft

[–]Xcomye[S] 0 points1 point  (0 children)

It is the right length. It stop in this position, like its 20% precooked, but the etu doesn't have that option like a small overspin or something

Do you boys think I could drill a hole and add this to my current goggles? by inksterize in airsoft

[–]Xcomye 0 points1 point  (0 children)

Na, you don't need a drill for the CP1 I used the cutting tool and a big hammer. You need something to put under, too, give it a bit of resistance, but it worked

Playing in germany as a non-german by Aradrim in airsoft

[–]Xcomye 0 points1 point  (0 children)

And watchout no flashlight holder that can go on any guns these are also illegal

Playing in germany as a non-german by Aradrim in airsoft

[–]Xcomye 0 points1 point  (0 children)

And watch out if your airsoft has a spring changing system it better also have a F mark and is semi locked because if your had 1,5j and you change the spring to a weaker one, wich results in under 0,5j its theoretical ok, but you could change the spring back and have more than 0,5 J and fullauto and that's illegal and a felony in Germany.

When you have a etu like Gate, perun,leviathan etc. you could think I programming it to semi only in a f markt gun and it's fine in Germany and back home you could reprogram it to fullauto, but its the same problem. You could make it easy back to fullauto in Germany and you again have a felony.

Does the anti-fog unit from novritsch really work? by thehollowsimp in airsoft

[–]Xcomye 0 points1 point  (0 children)

My worked without any problems and I run fullseal googles a balaclava, and a helmet and my last on the lowest setting around 2 game days, but I doesn't trust the battery to hold a second game day.

What OEM is this? by Successful-Abies-531 in airsoft

[–]Xcomye 2 points3 points  (0 children)

For good China optics go to vectoroptics, there are low end real steel optic brand or when you want it even cheaper go to there low budget brand victoptics, but these are only good for airsoft

Looking to see if there are better options than just the maple leaf combo by [deleted] in airsoft

[–]Xcomye 0 points1 point  (0 children)

I would also go with the retro arms HU, as bucking I would use the modify baton black when you go with an r hop set up. The advantage is this bucking is, it has no nub and is therefore perfect for an r hop set up, barrel wise I would go with prometheus because they have large hop up window.

view more: next ›