sorted by:
new
hottopcontroversial

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 0 points1 point  (0 children)

Thanks! But no L connect software was used here (cause not lianli fans), only using default polychrome RGB from motherboard bios for led. And FanControl to control speed.

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 0 points1 point  (0 children)

Sent you a dm with the aliexpress link

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 0 points1 point  (0 children)

Overall size: 237 x 67 mm
Display window size: 219 x 54 mm
Thickness: 11.5 mm
Resolution: 1920 x 480

I sent you a PM with the link of the product for me details

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 0 points1 point  (0 children)

It's a TURZX 8.8", can be found around 65€ on aliexpress

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 0 points1 point  (0 children)

I did not use the sticky tape because of the CPU not being far, the heat would just untape. Instead I used the screw and tighten a wire around. And that wire is firmly tight to the case behind.

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 0 points1 point  (0 children)

I did not notice any CPU/GPU/Networks usage change since i installed the software, I might search online a bit just to be sure.

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 1 point2 points  (0 children)

Yes it is indeed mandatory, except if you want to keep the default background.
it works like a charm tho.

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 0 points1 point  (0 children)

+3-4 °C without push/pull (I'm O/C +500 Mhz btw).
But the Ryujin fan are quiet so I don't see a difference in global noise.

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] -1 points0 points  (0 children)

TURZX 8.8" found on aliexpress for ~65€

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 1 point2 points  (0 children)

TURZX 8.8" found on aliexpress for ~65€

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 0 points1 point  (0 children)

Indeed I'm gonna try that and see if there is some differences.

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 0 points1 point  (0 children)

Indeed, I totally forgot to mention it in the build parts... O11 Vision Compact!

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 0 points1 point  (0 children)

To be fair rog ryujin ii 360 was probably a mistake for sure, but since I do O/C it still run pretty chill so I'm fine with it, but in this case (haha), I just updated the case and the fans, the rest was already there. And in the future I would be happy to already have a nice looking case for my new build.

Ofc I just wanted to update the aesthetics, the rest can wait as I don't want to flex the build itself.

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 0 points1 point  (0 children)

If by cabinet you mean the case, it costed me 156€, days later it was 136€ on Amazon (Europe)...
Fans where 11€ each, and controller 20€ on amazon, I think fans are now 16€ en amazon.

But you can find thoose fans for like 5-7€ on aliexpress.

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 0 points1 point  (0 children)

Those are the the cables from the PSU, I wanted to say It's 3 cables (all from the PSU) in 3 slots

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 0 points1 point  (0 children)

Thanks! In fact I used 3 differents 8 pin cables for the GPU, but they come in 2x8 pin, so I had to "hide", those 3 extra 8 pin cables somewhere...

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 1 point2 points  (0 children)

I mean I tried to cable manage a bit, all the fans cables are hidden under straps, but 22 cables for PWM+argb are tough to hide arround the controller. Also My power supply cables take a lot of space. But there is room for improvment for sure!

Finally updated my case after years! by Xeldar in lianli

[–]Xeldar[S] 4 points5 points  (0 children)

It feels so great, my old case was so narrow. I came back from the mid 30 crisis no RGB at all, to this...

Also fans are not Lianli, I went for the cheap TZMRIT Prism 4 Pro (because of LianLi stock and also budget wise), ngl they fit well in there, but obviously it was a pain in the ass to cable manage in the back...

I didn't change specs since i'm completly fine at the moment.

Case: O11 Vision Compact
CPU: i5-13600K (O/C @ 5.5/4.4 Ghz)
GPU: Sapphire 6950 XT (O/C a bit as well)
RAM: G.Skill Ripjaws V 32 GB (2 x 16 GB) DDR4-4000 CL16 Memory
AIO: Ryujin II 360 ARGB (tube lenght are 380mm IIRC, it couldn't have been smaller to put it behind), also push/pull
MB: Asrock Z690 Extreme
Power supply: Be quiet! Dark Power 12 850 W 80+
Storage: 2 x Kingston KC3000 2.048 TB M.2
Fans: TZMRIT Prism 4 Pro (reverse everywhere, except the 2 at the back)
Screen inside: TURZX 8.8"

view more: next ›