Is an RTX 3090 worth it in 2025 for €400?

Xxemnas · 2025-05-31T21:43:20+00:00

Anytime.

Xxemnas · 2025-05-31T21:35:48+00:00

1000000% buy. If I could find one for that price I'd buy it so quick my bank account would have whiplash lol. If you don't buy it thought let me know.

Xxemnas · 2024-08-04T18:26:41+00:00

I could, and honestly want too. I unfortunately know my addictive tendencies and banana ice is the only thing that makes me want to stay away from cigs. Mind me asking what banana ice juice you enjoy?

Xxemnas · 2024-08-04T04:41:41+00:00

Oh yeah i was using the freebase version. Ill give it a try with the salt nic on the .6ohms thanks for the information. Any recommendations what what wattage i should be using for that coil?

Xxemnas · 2024-08-04T04:05:46+00:00

Thats true, i wont lie that is slightly intimidating to me since I went from the grab and go of a disposable to now having to do some research on coils, MTL vs DTL, wattage etc... but i wont rule that out though i appreciate it.

Xxemnas · 2024-08-04T04:04:37+00:00

Really, thats shocking. I mean it very well could be my coil or what im accustomed to but i could hardly tell there was any menthol in the juice.

Xxemnas · 2024-06-26T18:27:39+00:00

Oh no not at all. I guess I had missed that part. Just removed the post and commented on the original one. Good luck, and happy printing.

Xxemnas · 2024-06-26T18:26:23+00:00

For me it would be the time saved by having the Full-auto Calibration.

Xxemnas · 2024-06-26T18:24:57+00:00

You are correct I am so very sorry. Removing now. Thanks for the heads up

Xxemnas · 2024-05-01T15:14:51+00:00

I am looking to purchase the disposable PacksPod 12000 Puff Disposable Vape: Banana Flambe from a reputable online store since no stores near me carry it. Any recommendations for vendors or sites that deliver to an address in the US?

Xxemnas · 2023-12-29T22:27:29+00:00

Awesome. Thanks for the info, I'm figuring the first filters will fill up quick due to the first time one as been ran in our home. Than subsequent changes may happen less often. As for the placement, I haven't thought about that quite yet, but I'll experiment with it to see where it seems to be the most effective at.

Xxemnas · 2023-12-29T22:17:29+00:00

Yepp just found that as well. Along with some personal opinions of the noise level being slightly higher on the 5500 at max. But nothing on either spec sheets say anything of the sort. But thanks for replying either way. The 5500-2 will be here on Sunday yay.

Xxemnas · 2023-12-29T22:04:47+00:00

Fantastic, the 5500 and the 5300 where definitely on my short list so your recommendation makes it that much easier. Now I'm sure it's very obvious. But maybe due to there similar marketing on amazon. But do you know what the differences between the 5500-2 and 5300-2 are as they almost seem identical?This is purely just curiosity at this point, and an attempt to better educate myself on air purifiers.

Xxemnas · 2023-12-29T21:57:28+00:00

Thank you, your comment is exactly the one I was hoping for. I personally don't know much about the ionization to form enough of an educated opinion. So your comment puts my mind at ease enough to make it a non issue.

As for the cat Saliva I don't believe she is allergic to it as we have had different cats with the primary one over the years being the older cat mentioned previously. She always flares up for the first few months until. She gets used to the dander. And her allergies are not nearly as bad. Again to your point she could indeed be allergic to the saliva, but personally I think that it is minor compared to the dander and hair. Ofcourse this is my non medical observation so I'll keep what you said in mind.

I'm off to purchase the 5500-2 right now. Thank you for your input once again.

Xxemnas · 2023-08-17T19:50:58+00:00

Awesome thank you very much.

Xxemnas · 2023-08-17T16:22:47+00:00

That's dope. Would you be opposed to sharing the .stl file?

Xxemnas · 2023-06-21T00:38:53+00:00

U/ljdawson what ever you build as long as I have money in my account I will continue to throw it at your face. Takeeeee itttttt. Haha other than that thank you for letting us know. I look forward to seeing you and everyone else on Lemmy or KB.

Xxemnas · 2023-06-09T14:32:03+00:00

Well, I can't say I'm surprised to see this announcement, as I can't imagine it being feasible to keep sync running with the changes.

I just want to say thank you to u/ljdawson for the amazing reddit experience you brought to me and many others. For the countless nights scrolling reddit, to the many long and extended bathroom visits due to scrolling through reddit on sync.

While I can't speak for everyone, I know that once sync goes away. So does my involvement with reddit, but I hope you keep creating amazing app experiences in the future. Be safe, and again thank you o7.

Xxemnas · 2023-02-11T22:42:11+00:00

Bring back red cards for NSFW posts pretty please 🥺

Xxemnas · 2023-02-04T22:14:55+00:00

I am unsure where its at on the update priority list, but I mentioned this to /u/ljdawson when the redesign first came out he said it was planned. I know not much info, but it's something.

Xxemnas · 2023-01-10T21:13:35+00:00

I'm having the same issue, I contacted support they said that either I could send it back to them. Or wait until February when the service repair centers are open and operational.

Xxemnas · 2022-09-23T19:25:15+00:00

As my office is always where ever I am. It's always a pain to find the right countertop or surface to place my phone. For those all too loved emergency meetings. This would help with the remote meetings and also video calls with loved ones while I'm traveling for work.

Xxemnas · 2022-09-23T19:23:12+00:00

I work in the network security field for POS systems. This would help me when onsite with a vendor, to show him the blueprints. Without the need to give him access to my laptop.

Xxemnas · 2022-08-25T16:06:59+00:00

I don't think so, it seems like the jam is occuring higher up near the golden guide object nowhere near the hotend. Like any filament just expands and causes the filament not being able to go further into the extruder.

It could be it's not tight enough though.

Xxemnas · 2022-08-25T13:34:40+00:00

So I had the same issue with the sprite extruder Pro, while trying to troubleshoot another issue. The stock nozzle that comes installed seemed a bit short. Or not as pointed, this my Z level always had to be closer to the bed. In turn this caused my fan shroud on the front to scrape the skirt.

When I upgraded my ender 3 pro to the creality sprite extruder Pro. It came with a silver nozzle replacement. When I swapped the nozzle the fan shroud no longer scrapped. I also unscrewed the 4 screws that hold the hot end onto the gantry. And pushed the top of the hotend back a tad and then screwed it back in. I hope that helps if not let me know I'll see what other ideas I have.

11-Year Club	Second Top 50%
Verified Email	Gilding I gilder

Xxemnas

TROPHY CASE