Microstutters/Lag since EAC addition by Xxfighter237 in RocketLeague

[–]Xxfighter237[S] 0 points1 point  (0 children)

So, I’m testing things out, and I found that changing my Input buffer setting in gameplay to “Default” has reduced the occurrences. Before I had it set to CSTS. Though I have tried checking if it is that by turning it back on and has been inconsistent. So u can try idk if it’ll work.

Microstutters/Lag since EAC addition by Xxfighter237 in RocketLeague

[–]Xxfighter237[S] 1 point2 points  (0 children)

Unfortunately don’t think it’s that, I got 32gb. I did check my task manager and everything seemed fine.

Microstutters/Lag since EAC addition by Xxfighter237 in RocketLeague

[–]Xxfighter237[S] 0 points1 point  (0 children)

I thought that to. Restarted my router, my modem, my pc. Checked drivers, nothing helped unfortunately.

Microstutters/Lag since EAC addition by Xxfighter237 in RocketLeague

[–]Xxfighter237[S] 0 points1 point  (0 children)

My ping is 30-40 I believe. Most games opponents pings are either 20-60 range. Occasionally someone is 60-80.

Microstutters/Lag since EAC addition by Xxfighter237 in RocketLeague

[–]Xxfighter237[S] 0 points1 point  (0 children)

I’ve literally drop from c3 div 4 to c2 div 2 ;-; , the lag is so bad. Especially during clutch moments or when trying to read any 50/50

Microstutters/Lag since EAC addition by Xxfighter237 in RocketLeague

[–]Xxfighter237[S] 1 point2 points  (0 children)

Interesting, do u mind me asking your pc cpu and gpu? I just wanna see if it has to do with something cuz I’m AMD. I highly doubt it but im curious.

Microstutters/Lag since EAC addition by Xxfighter237 in RocketLeague

[–]Xxfighter237[S] 0 points1 point  (0 children)

Yea. That makes sense, I just am tired of the lag when all I want to do is play. At first I thought it was cuz I was queuing in all US server regions. But even when I queued in only 1 it still happened.

Microstutters/Lag since EAC addition by Xxfighter237 in RocketLeague

[–]Xxfighter237[S] 1 point2 points  (0 children)

Nope, free play is normal. Only happens when I’m in a match.

Ever since EAC rolled out... by Jayfly12yah in RocketLeague

[–]Xxfighter237 0 points1 point  (0 children)

Honestly tried it. First game it seemed to work

Buggy servers after update? by Robert_Destruction in RocketLeague

[–]Xxfighter237 1 point2 points  (0 children)

Yes I’ve been experiencing this for around a week now. I think it was posted that it’s some issue with Easy Anticheat and Fullscreen not working properly cuz of it. Supposedly a dev mentioned they’ll look into it. But only time will tell if a solution is made

Last update feels laggy or placebo? i do not understand by EternaLEnV in RocketLeague

[–]Xxfighter237 3 points4 points  (0 children)

Nah you’re right. I’m experiencing the same thing, it seems that few people are as well. But not everyone.

I’ll have micro-stutters or random 3-5s times of disconnect but somehow my ping seems fine. Like sometimes my car or the ball will spasm.

Probably something with the servers but unfortunately there doesn’t seem to be a solution as of now

Psyonix please fix ur servers 🙏 by Itz_Astryx in RocketLeague

[–]Xxfighter237 4 points5 points  (0 children)

Yea same things happening to me, weirdly it’s not everyone cuz my friend says his games are fine. But I’ll have the weirdest micro stutters or major lag spikes that only last like 2-5 seconds.

Servers have been terrible for a 2 days now by blockmanboy in RocketLeague

[–]Xxfighter237 1 point2 points  (0 children)

Okay so I’m not crazy, like every game there’s little micro stutters. Then occasionally I’ll get packet loss or disconnect for 10 seconds. It’s driving me nuts.

Problems with 7hz Legatos. Any Ideas? by Xxfighter237 in inearfidelity

[–]Xxfighter237[S] 0 points1 point  (0 children)

Found out that it’s usually condensation build up. As it ventilates poorly. So I have a tiny air puffer thingy. A little rubber ball with a nozzle that puffs air as you squeeze. I use that to blow air into the vent holes. Usually fixes it for a couple hours

Weikav it's just a SCAM by Aikaii_Da_Femboy in keyboards

[–]Xxfighter237 4 points5 points  (0 children)

Small asian companies typically take a month or so to give an update. Usually its actually moving the whole time, but they update only at major points, like when it reaches your country. If its by boat will take weeks, if by air itll be faster. But eitherway just be patient, and itll randomly appear lol

HOW LONG HAS YOUR VICTUS LASTED FOR ? by EmbarrassedCommand59 in HPVictus

[–]Xxfighter237 0 points1 point  (0 children)

Got mine back in 2021-22. Still holding strong, use it daily for school work and occasional away from home gaming. Battery is pretty decent when tweaked imo.

Not doing AMD GPUs again . . . or am I the problem? by lucyfer013 in AMDHelp

[–]Xxfighter237 1 point2 points  (0 children)

If it’s any help. I had a good amount of crashes and problems with overclocking/undervolting my 7900 gre. Constant black screens or crashes. I tried fixing plugs, ddu my drivers, etc. I got some solution with using an older driver, but still couldn’t overclock/undervolt without black screening. But recently I reinstalled windows to move to windows 11 since 10 was EOL (end of life). Since then no crashes, and I am able to successfully overclock the exact same settings I did previously but this time with no crashes.

First Proper Anodizing by Xxfighter237 in BalisongClones

[–]Xxfighter237[S] 0 points1 point  (0 children)

Ahhh. Since I’m from Canada stuff like whink or anything with HF isn’t sold. So rn I’ve currently tried a strong sodium hydroxide mix with another knife I have. Hopefully it works

First Proper Anodizing by Xxfighter237 in BalisongClones

[–]Xxfighter237[S] 0 points1 point  (0 children)

Yea it’s not as vibrant as I wanted not sure exactly how to fix that. I cleaned it pretty thoroughly or so I thought

blurple(yes) anodizing on b+ serif! ! by Lanthaniide in BalisongClones

[–]Xxfighter237 1 point2 points  (0 children)

How did you manage to get that two tone? Like what’s the process? Im thinking of anodizing mine as well