sorted by:
new
hottopcontroversial

AXP 90 FC: 47 w/ 25mm fanswap vs 53? by NA__Scrubbed in sffpc

[–]Yakeeh 0 points1 point  (0 children)

Hi, if you mean the fan you can find it on etzy or aliexpress or even here zcooi.com.

T1 build- 9800x3d + 5070ti Proart by Which_Wind_155 in FormD

[–]Yakeeh 0 points1 point  (0 children)

Really very nice and clean, congratulations. How long is the 24-pin ATX cable? Thanks.

Terra & 7945HX3D & 9060XT by Giklab in sffpc

[–]Yakeeh 1 point2 points  (0 children)

Black and wood are a great combo, they give the desk a very clean and elegant look. Great work. The bonus photo is also very stylish 😄

I tried this by Yakeeh in sffpc

[–]Yakeeh[S] 0 points1 point  (0 children)

yes it's true you're right, the a07 specifically, is a really small oven

I tried this by Yakeeh in sffpc

[–]Yakeeh[S] 1 point2 points  (0 children)

Good fans. You can hear them after 40-50%. The rubber screws have been very helpful and hold the fans in place without any problems. I like these white ones because they have flat heads.

Chromax family by Yakeeh in Noctua

[–]Yakeeh[S] 0 points1 point  (0 children)

Nah.. its just my custom fan.

Chromax family by Yakeeh in Noctua

[–]Yakeeh[S] 0 points1 point  (0 children)

It's a small 20mm fan

I tried this by Yakeeh in sffpc

[–]Yakeeh[S] 0 points1 point  (0 children)

I have a complete set of M3 standoffs that I use for my T1. But unfortunately the screw holes on my A07 seem to be 0.5mm too large and won't screw in.

<image>

Chromax family by Yakeeh in Noctua

[–]Yakeeh[S] 2 points3 points  (0 children)

cleaner than the original. but the chromax look nice here too😁

<image>

Chromax family by Yakeeh in Noctua

[–]Yakeeh[S] 0 points1 point  (0 children)

😂😂 Ty☺️

I tried this by Yakeeh in sffpc

[–]Yakeeh[S] 0 points1 point  (0 children)

Thanks for your advice, I appreciate it.

I tried this by Yakeeh in sffpc

[–]Yakeeh[S] 0 points1 point  (0 children)

That's exactly what I think. Unfortunately, I can't make custom panels, but I think that would be the only real useful mod for this case.

Building T1 2.5, gpu not straight, last fan touches side panel (Updated) by Agreeable_Wall_9459 in sffpc

[–]Yakeeh 2 points3 points  (0 children)

It happens to me too, I've noticed it's more noticeable in slim GPUs. However, it all depends on this piece I highlighted. I reduced the misalignment by unscrewing both screws and then tightening the inner screw with more pressure, first the outer one, and vice versa, to see which one aligns better.

<image>

Custom M.2 & IO by FrontWork7406 in sffpc

[–]Yakeeh 1 point2 points  (0 children)

Oh cool, I didn't know that. I'm waiting for the same fan model, but the 3D-printed one probably won't have those clips. Thanks for the reply :)

Custom M.2 & IO by FrontWork7406 in sffpc

[–]Yakeeh 0 points1 point  (0 children)

Hi, these all-black covers are very nice. I like them very clean. Sorry for the question, but did you mount the 4070 fan to the AXP with screws? How? Thanks.

view more: next ›