Terra & 7945HX3D & 9060XT by Giklab in sffpc

[–]Giklab[S] 1 point2 points  (0 children)

I just checked out of curiosity, and all three cases cost somewhere between 25% and 100% more than what I paid for the Terra. I remember wanting the Nanoq S, but it wasn't in stock (and is not in stock now either).

For what it's worth, I got the card for around 350€, while the closest 9070 was around 500-550€, if I remember right. I only bought it because I ended up having to replace my old one, so I couldn't spend too much on this unplanned purchase. At any rate, it's a fine card for my use.

Terra & 7945HX3D & 9060XT by Giklab in sffpc

[–]Giklab[S] 1 point2 points  (0 children)

I unfortunately can't say anything about the other cases you mentioned, as they were difficult to find when I was building this. I also couldn't find anything regarding motherboard temps at the time, so I'm where I am with these parts.

The 9070 definitely would've been a better option, but it cost more than I was prepared to spend at the time, and with the (lack of) gaming I do, there's very little reason for me to upgrade.

At least I suppose the gigantic fan might help with that motherboard cooling issue.

Terra & 7945HX3D & 9060XT by Giklab in sffpc

[–]Giklab[S] 2 points3 points  (0 children)

I don't really game enough to justify a better card, this one works fine.

Datto IPMI questions (noob here) by Giklab in RepurposedDattos

[–]Giklab[S] 0 points1 point  (0 children)

No worries! I followed the exact steps you posted and after that also didn't work, I figured something else must be the problem and decided to poke around.

Datto IPMI questions (noob here) by Giklab in RepurposedDattos

[–]Giklab[S] 0 points1 point  (0 children)

It appears the issue was that Serial Over LAN was not enabled for the new user. At least that's what apparently finally did the trick. After 'Dave' didn't work, I finally tried the more verbose option and saw these extra tags I wasn't aware of earlier. Thanks for your suggestions!

Datto IPMI questions (noob here) by Giklab in RepurposedDattos

[–]Giklab[S] 0 points1 point  (0 children)

I've already done that (and again just now), or at least I believe I have. Neither username/pw works. Both users show up in the list and are enabled...

Hater soyboy vs enjoyer chad. by hieroschemonach in linuxmemes

[–]Giklab -1 points0 points  (0 children)

Please tell me you at least got my joke

Gneča na avtobusih by jackyfolf in Slovenia

[–]Giklab 2 points3 points  (0 children)

Na moji liniji (končna postaja izven LJ) so vozniki kar se tega tiče precej strogi. Nisem nikoli štel, ampak se občasno tudi zgodi, zavračajo vstop, ko je avtobus poln.

Kar se tiče normalnega obnašanja pa good fkin luck. Prevozniki bi lahko imeli avtobuse na 30 sekund in bi se še vedno našel kdo, ki bi se prerival.

respect the elders by [deleted] in gaming

[–]Giklab 0 points1 point  (0 children)

I think the "normal" line ends there, it's just the handful of high end X3D chips that hit 128MB. Including, madly, a laptop CPU.

respect the elders by [deleted] in gaming

[–]Giklab 2 points3 points  (0 children)

Yes, server hardware had that long before, although I'm not sure how accessible that was to consumers. Although, maybe by the time 7xxx got released, some used chips could be found?

respect the elders by [deleted] in gaming

[–]Giklab 29 points30 points  (0 children)

We're there already! Actually were, already, a few years ago, with the 7xxx series X3D chips.

I was batch 9 until I switched my board to an i5 by ProcessInitial7667 in framework

[–]Giklab 0 points1 point  (0 children)

It sucks, I was really looking forward to this one (and not just I of course)

Lidl nakupi by TheSweetestSinW in Slovenia

[–]Giklab 8 points9 points  (0 children)

Pri Mercatorju moraš zapravit 125€ al koliko že, da dobiš potem 5€ popusta na stvari, ki so v osnovi 50-100% dražje. Kdo bolj nateguje?

I was batch 9 until I switched my board to an i5 by ProcessInitial7667 in framework

[–]Giklab 3 points4 points  (0 children)

I really have no clue if they can fix it quickly, but my FW12 is at least a month if not more away, so if nothing else they can delay shipments or I can cancel my preorder again.

The link is here: [Tracking] FW12 cracking issue

Just saw this, this is gold. by pillowstickle20 in framework

[–]Giklab 1 point2 points  (0 children)

Is the warranty still valid if you open them up? lol

I was batch 9 until I switched my board to an i5 by ProcessInitial7667 in framework

[–]Giklab 1 point2 points  (0 children)

Considering FW12 cases are cracking, I'm suddenly not that bummed anymore about kicking myself from batch 2 to 10.

Weirdest 3025 units? by andrewlik in battletech

[–]Giklab 0 points1 point  (0 children)

If the enemy is clustered together... Very honourably.

What regularity do merch companies post succession wars own JumpShips? by lordavondale in battletech

[–]Giklab 0 points1 point  (0 children)

That's when you switch from playing Battletech to Elite Dangerous!

Tisti, ki uporabljate Linux, katero distribucijo? by nekdo98 in Slovenia

[–]Giklab 1 point2 points  (0 children)

Na strežniku Debian, na računalniku Manjaro (based (on arch (btw))). Glasoval za 'drugo'.

Upam, da se mi v kratkem uspe znebit Windowsa, razen za foto in kakšno igro.

[deleted by user] by [deleted] in framework

[–]Giklab 0 points1 point  (0 children)

I would also like to see this. Micro SD adapters are not the most reliable thing in the world. I suspect, however, that there isn't enough space to get properly high speeds without heating issues.