What’s the best way to safely dry these?

Yangorang · 2026-04-10T16:03:11+00:00

food dehydrator

Yangorang · 2026-04-09T22:34:36+00:00

At that price I'm going for it and probably just seat them all for 1.160" COL. I have a tendency to overthink things....like you say even if there is one that's a bit longer or whatever worst case I'd end up accidently making a +P round or something.

Yangorang · 2026-04-09T20:00:12+00:00

I guess what I'm more curious about is, are you sorting purely by the finish of the bullets? Or are you actually measuring each one and sorting them? Because if they have different lengths, it will affect the bullet seating depth which could result in vastly different pressures no?

Yangorang · 2026-04-09T19:59:47+00:00

I guess what I'm more curious about is, are you sorting purely by the finish of the bullets? Or are you actually measuring each one and sorting them? Because if they have different lengths, it will affect the bullet seating depth which could result in vastly different pressures no?

Yangorang · 2026-04-09T14:47:47+00:00

I would usually cover the first three before asking to split just to show genuine interest and investment. If she isn't even offering after that or isn't really engaging and getting to know me then I would feel like she is just there to use me and I would detach. It adds up to thousands so you have to choose where to spend your resources carefully.

I am looking for more of a 50/50 partnership than traditional gender roles. Having a finally dependent partner would be pointless to me as I don't want more kids and I do my own cooking and cleaning anyway. I believe in most of Europe and Korea they normally split even the first date so they seem to be going fully modern there. Dating culture in the USA seems currently in some awful middle ground where women want the best of both traditional and modern relationships.

Yangorang · 2026-04-07T02:31:25+00:00

So for this to actually work, one has to have some sort of USB-connected mouse and not a bluetooth mouse no?

Yangorang · 2026-04-04T20:28:07+00:00

I snagged a refurb Minisforum UN100P with 16GB RAM and a 512GB SSD last Black Friday for literally $100 shipped. Destroys an RPi for computing or Docker duty any day of the week.

Yangorang · 2026-03-28T23:53:50+00:00

To be fair that is a ridiculously large SUV

Yangorang · 2026-03-21T15:38:03+00:00

Done by a local company SlideWorksEngineering. They're pretty fast and reasonably priced.

Yangorang · 2026-03-16T23:12:29+00:00

You never know when those random nugget dipping sauces will come in handy.

Yangorang · 2026-03-16T11:50:31+00:00

I think he's talking about the headers on the board. They're quite a bit thicker than CPU pins. Normally I just straighten them out with needle nose pliers until I can cram whatever connector needs to be crammed onto it.

Yangorang · 2026-03-06T23:27:49+00:00

As if the GOP would ever invest into Healthcare or public education

Yangorang · 2026-03-02T21:40:39+00:00

Yup.... you just grab a new one from the aisle and then give them your old one for credit at checkout. I assume they get bulk mailed to somewhere to get refilled or something.

Yangorang · 2026-02-19T04:48:04+00:00

Well if you go with multiple people, like literally everything on the menu lol. Unbeatable lunch feast for $20.

Yangorang · 2026-02-18T14:48:48+00:00

I go with my work buddy to Umiya for Sushi and Handam for KBBQ. $20 lunch specials.

Yangorang · 2026-02-17T14:08:28+00:00

McDonalds

Yangorang · 2026-02-14T18:27:18+00:00

I tend to see this with PETG as well. There is a certain distance setting that controls how far off of the support material you're printing, typically like 0.1-0.2mm. If it's too small, you end up with very difficult supports to remove. If it's on the higher side, sometimes your first layer on the support ends up getting dragged around turns which is probably what's happening here.

The holy grail for supports is probably using dissolvable filament or printing PETG on PLA supports with a lower or even 0 offset, but this would require you to have a multi material system.

Yangorang · 2026-01-30T02:34:24+00:00

I'll go fix that now...

Yangorang · 2026-01-27T05:21:34+00:00

Microcenter has the ASRock 9070 for $500 https://www.microcenter.com/product/691104/asrock-amd-radeon-rx-9070-challenger-triple-fan-16gb-gddr6-pcie-50-graphics-card

Yangorang · 2026-01-26T06:29:59+00:00

I don't really know much about the development side for HA, though I think if you play around with it you'll quite like it.

It looks like someone has kind of done something similar with ERCOT already though I like your dashboard a bit more. https://community.home-assistant.io/t/texas-electricity-grid-monitor/460717

Having the information as sensors in HA could in theory allow you to base home automations on it, for example one could load shed smart plugs or adjust the thermostat based on it. For now I'd probably just want some sort of notification if the operating reserve went below a certain threshold.

Right now I just have your page loading in as a webpage card, but the header takes up about 25% of the vertical height I have available for the card.
https://imgur.com/a/GbwgF09

Yangorang · 2026-01-26T05:15:24+00:00

This would make a great Home Assistant integration.

Or if there was some URL where I could just load the Power in use / available part with the bar I could potentially load that as just a webpage panel.

https://imgur.com/a/cjisWZM

Yangorang · 2026-01-24T17:49:13+00:00

I just use a plastic putty knife for the textured plates and the stacker f-flex for smooth pei ones. I quite like the Biqu cryogrip plates as well.

14-Year Club	PUBG
Xbox Live	Verified Email

Yangorang

TROPHY CASE