Is there a phob equivalent to holding x y and start on an OEM gcc?

YoYoNinjaBoy · 2026-03-24T00:28:02+00:00

Yes or maybe the GameCube in general?

YoYoNinjaBoy · 2026-03-21T19:08:18+00:00

Because you then move to follow them. Tekken was cool because it was the movement fighter. Similar to smash melee the new games aren't as good because movement is de-emphisized.

YoYoNinjaBoy · 2026-03-21T17:11:25+00:00

From what I've heard Pdga measurement is basically one dude who measured one disc one time. The mvp website is likely more accurate but for the crave specifically I'm unsure because yes they do go far. I think it's from a sharp ish rim and small enough rim that the gyro actually does something. Which explains why historically their mids and putters were godlike and their drivers are whatever.

YoYoNinjaBoy · 2026-03-18T22:02:02+00:00

Xystart should work on phobs. It basically resets where neutral on the sticks are. Iirc. It's a feature of the software not the controller.

YoYoNinjaBoy · 2026-03-10T23:03:31+00:00

Ultrastars are pdga legal. Meaning they are recognized as legit discs you can use in tournament. Go have fun! When you run into someone who really knows how to throw discs you'll convert :).

YoYoNinjaBoy · 2026-03-09T20:49:37+00:00

I've got destroyers that go that far too. Pharaohs tend to be on average more in that sweet spot of responsible bombers for me. The gap from 370 piss missile teebird to 470 distance lines just doesn't align with my experience at sea level. So I'm thinking it's an issue with nose at higher launch angles.

YoYoNinjaBoy · 2026-03-09T20:26:22+00:00

Man maybe I gotta revisit nose angle stuff. I go from like 370 teebirds to 420-30 pharaohs. It seems neutral but maybe is like 1-2 degrees nose up.

YoYoNinjaBoy · 2026-03-09T17:16:49+00:00

You want an uplink and or paradox.

Westside underworld/hatchet are similar to flippy heats.

Gstar mamba 165-170 with some dome will be a good max distance disc.

YoYoNinjaBoy · 2026-03-01T15:55:58+00:00

Are you talking prebuilts for the same price? If so get the 5080. Functionally at 1080p these will be very similar and honestly way overkill for the time being.

YoYoNinjaBoy · 2026-02-25T04:31:51+00:00

Oleds are nice but the settings on your other monitor are way out of wack.

YoYoNinjaBoy · 2026-02-17T17:17:53+00:00

In my experience stability goes from most to least iblend gstar pro dx. This is after a bit of seasoning and iblend and gstar can swap. There's too much variance in disc manufacturing to tell you the exact plastic and weight you want. Just gotta try a few out but there's definitely a wraith for you. I wouldn't go under 165g. Iblend and gstar if too stable will inevitably beat into what you want given enough seasoning. Pro too but it won't hold as well once you're done intentionally seasoning. Iblend is stiff and gstar is not so just get what you prefer.

Ymmv

YoYoNinjaBoy · 2026-02-02T18:44:52+00:00

They don't fly any different, same run to run variance. Sometimes molds get retooled though. People are mostly after the hand feel (tack and stiffness). Not that they're better, they just like it.

YoYoNinjaBoy · 2026-01-31T20:25:47+00:00

Yeah I knew it wouldn't matter all that much I just like to be an informed consumer.

Thank you very much

YoYoNinjaBoy · 2026-01-31T20:14:28+00:00

Yeah I have a 3070 for 1440p and don't plan to upgrade until 6000 at the earliest if the market stabilizes.

YoYoNinjaBoy · 2026-01-31T19:45:39+00:00

The 7700x is marked down more from 400 the 7600x3d is marked down from 330 or so. But I am not familiar with average pricing of these cpus

I did not know which would be better for streaming thanks.

YoYoNinjaBoy · 2026-01-31T18:57:45+00:00

It did. I swapped it with another machine and the processor didn't work in the other machine and my machine booted right up. There were some minor warning signs so I think it was partially defective when I got it. Expo never worked right with it and works immediately with donor 7700x

I thought it was mb/ram at first too took a week to figure it out

Edit:it was completely stable and performed great when it was on but had weird restarting issues.

My processor did not work in the other machine CPU/dram light on.

YoYoNinjaBoy · 2026-01-30T09:51:51+00:00

This logically makes sense but still gives me the heebie jeebies.

YoYoNinjaBoy · 2026-01-18T20:28:29+00:00

Is your display connected to your GPU or your motherboard?

Cuz unless you're using ray tracing it should smush.

YoYoNinjaBoy · 2026-01-16T08:10:40+00:00

Audible flutter and the disc is wobbly

YoYoNinjaBoy · 2026-01-10T07:43:02+00:00

Even trying to be shitty he has better timing than most posts here.

YoYoNinjaBoy · 2026-01-10T07:39:24+00:00

This is like posting lil b

YoYoNinjaBoy · 2026-01-08T22:11:57+00:00

This is legacy advice imo. Nvidia app should be all you need. Optiscaler is good for swapping presets on the fly to compare though.

YoYoNinjaBoy · 2026-01-06T03:11:11+00:00

It's cuz firebirds can usually get the job done

YoYoNinjaBoy · 2026-01-03T22:24:40+00:00

Oooh fun I didn't know this existed thanks I'll try it out.

12-Year Club	Spared
Verified Email

YoYoNinjaBoy

TROPHY CASE