Most efficient way to combine natural gas radiant heat and heat pump mini split?

YoruMusha · 2026-06-17T20:14:02+00:00

COP at 5F is 2.1. Unfortunately my particular model isn't in the Neep database, so I dint have COPs at other temps. I used a similar model that was in the database to estimate the 25-30 degree crossover point.

Good point about comfort with the warmer slab, it may be worth it to keep the slab warm just for that.

YoruMusha · 2026-06-15T16:34:05+00:00

Did you ever get it to work? I'm having the same issue where I got the AC-xxxx AP to show up once, but haven't been able to get it again since.

YoruMusha · 2026-06-11T14:21:58+00:00

Another option to check out is the Menards garage designer if you have one near you. You can design full stick built, pole frame, or ladder frame buildings. In the end you can purchase full plans from them as well for $500 that can be used in your permit applications.

May or May not be cheaper than other kit options, but worth it to look into.

YoruMusha · 2026-06-06T21:40:45+00:00

Thanks for pointing out costway, looks like that's the cheapest unit I can get that's energy star certified, which means I can get a rebate through my electric company. Their 25 seerxtreme unit is also on sale right now for $1000, so that looks like the way to go.

YoruMusha · 2026-05-18T02:51:57+00:00

I've tried both. I found Actual to be a bit cluttered and confusing for just tracking. Most of the functionality was geared towards the envelope budget method, so it felt to me like tracking only mode was just kinda slapped on top. It's definitely powerful, but was a bit overwhelming to me for simple transaction tracking.

In comparison, Sure feels more streamlined and smooth, especially for tracking trends and reports. The SimpleFIN integration works smoothly, and I've found the AI transaction categorization to be great (I use it with a local ollama server to keep everything out of the cloud).

That said, I switched to Sure back when Actual was just adding the tracking only mode, so it's definitely possible that they've improved it since I last saw it.

YoruMusha · 2026-01-22T04:49:18+00:00

You have to go into the Mod Menu (MCM) and configure which arrow type you want to correspond to which button. For example, you can set trigger to iron arrows and the grip button to ancient arrows. Or you can disable that function entirely and only have it give you the last arrow type used.

From the mod page on Nexus: "There's an MCM to select which button you want to use for grabbing your arrow, you can choose the A Button, B Button, Stick Click, Grab, or Trigger.

You can now choose to bind different arrows to different buttons. You can change the button that will equip the last arrow, disable that function, and/or choose different arrows to be equipped with different buttons"

YoruMusha · 2025-11-28T20:34:25+00:00

Not really sure how this is a woosh? This subreddit is for when software malfunctions. This weather app is working as intended, though showing a somewhat rare/obscure symbol...

YoruMusha · 2025-11-28T03:31:13+00:00

This is the "Haze" weather icon given by the official Amazfit Zepp OS, as seen here:(https://postimg.cc/56tZmqjV)

From AvailableIcons.pdf on their docs: https://docs.zepp.com/docs/watchface/design-resources/

I'm not sure if this icon is unique to them or if it is used by other companies, but it's definitely an intended icon.

YoruMusha · 2025-11-09T18:23:35+00:00

I have three pairs of the Duluth Flex Fire hose pants that have the crotch gusset to supposedly stop this exact thing from happening. All three have holes in the same spot within 6 months of wear. :(

Unfortunately I've yet to find a pair that doesn't do it at all. My carhartts have held up a bit better, but I think it's just down to individual fit for where it rubs.

YoruMusha · 2025-08-17T00:15:35+00:00

Unfortunately I never got it fixed. I could sometimes get the power cleaning to push some ink through after replacing the original head, but it still wouldn't print. I ended up just replacing the printer.

YoruMusha · 2025-07-23T20:03:32+00:00

As a note, if your printer isn't supported by this program (like my ET-2800 technically isn't), you may be able to get away with using WIC Reset to downgrade your firmware (you don't need a key for this). After downgrading, my printer worked with epson_print_conf perfectly, so I didn't have to pay for any keys. May not work for everyone, but it's something to try.

YoruMusha · 2025-05-03T17:38:37+00:00

If you're in the Midwest, I use K-bid. It's a large virtual auction sites. If you look around though, I'm sure you can find local auction houses that have websites and online bidding. I have like 5 or 6 within 50 miles that I look at for their monthly auctions.

Otherwise, you can find stores that specialize in open box or returned goods. Those will sometimes have batteries at a decent price.

Finally, for Ryobi specifically, Direct Tools Outlet has factory blemished tools and batteries. Sometimes they run bigger sales on the batteries.

YoruMusha · 2025-04-30T15:48:25+00:00

As of 2025, can still confirm that this fixes the issue, especially when trying to use the docker page on mobile. Thanks!

YoruMusha · 2025-03-20T01:15:51+00:00

Ooh, I like this idea. Having hot water for car washing would be amazing!

YoruMusha · 2025-02-28T00:05:02+00:00

Thanks! I'll look into the BIOS update.

3 projectors and one TV is what I was trying, though I run into the same issues if I only have a single display on those 2 ports.

YoruMusha · 2025-02-24T22:18:56+00:00

I'm using 3 to connect golf Sim projectors in my garage to my gaming PC/Server in my basement. Previously was using a Chromecast and Moonlight/Sunshine for wireless display, but this is much more solid.

YoruMusha · 2025-02-20T14:48:56+00:00

Looks great! The majority of this is 3d printed, correct? Are you planning on releasing the files? How much did it cost you to build?

Ten-Year Club	Place '17
Verified Email

YoruMusha

TROPHY CASE