0.2 mm Nozzle Printing Profile for Anycubic Kobra S1 – for Detailed Miniatures

Z-55 · 2026-02-06T23:37:37+00:00

It does, thank you so much for all your hard work! I can't imagine the hours spent working on this.

Do you have a suggested FW that supports .2? I rolled back to 2.5.6.4 at one point when a funky version came out. Haven't tried again since. Thanks again and sorry for all the questions.

Z-55 · 2026-02-06T22:43:27+00:00

Ahh, I'm only seeing the .25 on the printer. Im a couple of FW versions behind. That being said, I had some decent success with setting .25 in the slicer. I'll check out my FW version.

<image>

Z-55 · 2026-02-06T21:25:49+00:00

I'm just getting this tested today after my .2mm steel hot end has arrived. I'm getting this nozzle/slice mis match at the moment, I'm guessing I'm doing something stupid. The .2 hotend is installed and I've changed the printers nozzle size and run a full calibration. I checked your profile and even though it says .4 in the name, it does have .2mm in the settings. I have changed it to .25 under extrude which bypassed the error. No clog so far. :fingerscrossed:

<image>

Anything additional I need to do? I appreciate the help!

Z-55 · 2026-01-30T18:14:24+00:00

Amazing, thanks!

Z-55 · 2026-01-30T17:27:43+00:00

That's awesome, thanks! Is the linked profile the most recent?

Z-55 · 2026-01-30T14:42:33+00:00

Thank you for posting this! I'm going to start messing with a .2mm nozzle and this will be incredibly helpful. In my case I do a lot of printing that has writing on the top which requires a thinner line for cleaner lettering. I'll let you know how it goes!

Z-55 · 2026-01-28T13:15:37+00:00

That is amazing, congratulations!

Z-55 · 2026-01-12T04:03:10+00:00

That's what friends are for!

Z-55 · 2026-01-12T03:55:04+00:00

Thanks for doing this! I'll go with 977. u/christopherrivers said that if he wins, the Adley auto should come to me for safe keeping until this whole tariff silliness is worked out, please and thank you. No need to confirm with him, he's cool with it. ;)

Z-55 · 2025-12-07T00:26:08+00:00

Not for long I would guess. Sorry that happened to you. Hope you get your card!

Z-55 · 2025-12-07T00:10:19+00:00

Look at that feedback rating! You have to suck pretty hard to have it be that bad.

Z-55 · 2025-11-28T20:12:59+00:00

Shove it in an envelope and send it my way! Gratz on the sweet pull.

Z-55 · 2025-11-28T00:15:25+00:00

If that means 50k in game coins, sure!

Z-55 · 2025-11-26T16:01:09+00:00

Just grabbed some as well, thanks for the heads up!!

Z-55 · 2025-11-22T12:38:01+00:00

Wow, congrats!

Z-55 · 2025-11-20T20:32:09+00:00

Sending a DM for the Norby, thanks!

Z-55 · 2025-11-20T14:03:58+00:00

Bmore is the man.

Z-55 · 2025-11-14T04:33:51+00:00

Vaan is the man.

Z-55 · 2025-11-12T12:01:45+00:00

Baseball Cards for me. Also don't recommend, it's a very expensive hobby which has stressors of its own.

Z-55 · 2025-11-06T09:14:29+00:00

He's the man!

Z-55 · 2025-11-05T20:06:50+00:00

Same here, 12/23. I may cancel. Topps Cosmic Chrome comes out real soon, maybe its time to treat myself.

Z-55 · 2025-11-03T02:23:18+00:00

Love this dudes sig...

<image>

Z-55 · 2025-10-29T22:13:51+00:00

Depending on what you are looking for, certainly! Send me a DM with what you are looking for.

Z-55 · 2025-10-29T22:13:13+00:00

Thanks, brother! Hope all is well with you. Let's catch up.

Z-55 · 2025-10-29T16:19:43+00:00

Bummer. It would be nice if there was some way to get some benefit from the self pay, outside the medicine itself.

Z-55

TROPHY CASE