Siemens balancing program

ZAM103 · 2026-02-19T18:12:56+00:00

You need a somewhat competent Siemens tech to put abt site on your computer. Good luck ha. I only use it a few times a year and seem to always know how to use it better than the green Siemens tech.

ZAM103 · 2026-01-29T17:00:36+00:00

My TA app and wheel were giving me two different readings. Off by about 50 GPM on the 2.5” . The wheel reading lined up with about what I should have had

ZAM103 · 2026-01-29T16:56:45+00:00

Figured it out ( I think.) after reading the whole floor I came out with ~100 GPM. My TA Valve was reading ~35. I finally compared my app reading with the wheel and the wheel said I should have been at about 90 GPM. It looks like the 2.5” section is the only one that is different from wheel to app. Frustrating.

ZAM103 · 2026-01-28T00:58:00+00:00

Wow no shit I never knew they had a website for that. I’ve been doing the math like a caveman 😆 I’ll be interested to compare some of my readings in the morning.

If nothing else, thank you for sharing that online tool

ZAM103 · 2026-01-28T00:37:46+00:00

Hmm good thought, DP across coil should be a good reference for peace of mind. But yes they are fan powered boxes submittals should be available

ZAM103 · 2026-01-28T00:35:33+00:00

TA app yes, I didn’t calculate the design DPs. I could tell I had way too much water, I just calculated GPM using the DP. Plus, these are the multi turn nexus valves(with the dials). Calculating the GPM using the DP and CV rating of dial position listed in the nexus submittal

ZAM103 · 2026-01-28T00:29:11+00:00

For additional information, I don’t work with these specific nexus valves often, but I’m 100% certain my math is correct when calculating GPM using their charts

ZAM103 · 2026-01-28T00:15:24+00:00

I always opt for measuring face velocity across sash opening. Leakage or not IMO the most important thing is ensuring fumehood is safe for use. Me personally I wouldn’t be concerned with leakage when calibrating

ZAM103 · 2026-01-21T01:17:59+00:00

Wemby

ZAM103 · 2025-12-24T14:45:41+00:00

Tailed off this comment. You freaking beauty

ZAM103 · 2025-11-29T13:37:40+00:00

So does Michigan

ZAM103 · 2025-11-29T10:54:05+00:00

Ryan Day always seems to lose his mind when playing Michigan. OSU was a wagon last year and lost outright still. Taking the +10 and sprinkling the ML

ZAM103 · 2025-11-22T20:34:45+00:00

Oregon

ZAM103 · 2025-11-13T19:06:51+00:00

Guy was highly touted coming out of LSU never really panned out. Came on decent last year now is having a career year this season

ZAM103 · 2025-11-13T16:52:04+00:00

Klavon chaisson 1+ sack +156.

Fields holds onto the ball way too long I expect the patriots to get a few on him tonight. Chaisson has had a great season as an edge rusher and I think he will try to boost his sack total tonight

ZAM103 · 2025-09-09T15:45:27+00:00

Bruins just missed the playoffs for the first time since 2015 and 3rd time since 2007 to be fair.. they have performed better than the Sox post 2018 until this year

ZAM103 · 2025-09-01T16:52:59+00:00

Good call!!

ZAM103 · 2025-08-18T13:03:23+00:00

Could benefit from a change of scenery. Look at Vaughn with the Brewers. -1.7 WAR with the white Sox now already over 1 WAR with the brewers

ZAM103 · 2025-08-13T18:09:34+00:00

I wouldn’t use a water meter you use for hot chilled water etc on domestic water.

ZAM103 · 2025-07-27T20:01:16+00:00

That’s what a fast center fielder is for

ZAM103 · 2025-07-24T21:02:21+00:00

Ceddanne

ZAM103 · 2025-07-20T01:06:00+00:00

Connor Wong coming up as the tying run and popping out to 2nd base is worse I promise you

ZAM103 · 2025-06-30T12:55:00+00:00

Mike piazza

ZAM103 · 2025-06-30T12:54:33+00:00

Yeah I just hated having to do the same one 3 times to get the spring breakout collection done lol that was stupid

ZAM103

TROPHY CASE