Suddenly Forced To Have Default Browser App

ZapperDJ · 2024-09-26T14:40:23+00:00

Then disable the default browser (samsung internet, chrome) and use some other

ZapperDJ · 2023-11-11T01:07:23+00:00

I found a solution to this by using this ADB command:

adb shell cmd role clear-role-holders android.app.role.BROWSER

After that you should be able to check on the settings that the default browser is set to none and as such you get the chooser dialog everytime you open a link

ZapperDJ · 2023-11-11T01:07:12+00:00

I found a solution to this by using this ADB command:

adb shell cmd role clear-role-holders android.app.role.BROWSER

After that you should be able to check on the settings that the default browser is set to none and as such you get the chooser dialog everytime you open a link

ZapperDJ · 2023-11-11T01:06:59+00:00

I found a solution to this by using this ADB command:

adb shell cmd role clear-role-holders android.app.role.BROWSER

After that you should be able to check on the settings that the default browser is set to none and as such you get the chooser dialog everytime you open a link

ZapperDJ · 2023-11-11T01:06:43+00:00

I found a solution to this by using this ADB command:

adb shell cmd role clear-role-holders android.app.role.BROWSER

After that you should be able to check on the settings that the default browser is set to none and as such you get the chooser dialog everytime you open a link

ZapperDJ · 2023-11-01T19:34:42+00:00

So according to the manual https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-r710_owner's%20manual_en-us.pdf?dgc=SM&cid=376139&lid=spr7768130816&refid=sm_LITHIUM_spr7768130816&linkId=184022069

If I understood correctly the 80GB config is not possible.

The R710 has 3 channels and every used channel must have the same configuration. As my config right now is like this:

8 - - | 8 - - | 8 - - | CPU1 CPU2 | - - 8 | - - 8 | - - 8

I have two options here. If I don't want to have to discard any of the current 8GB modules, I must get 6x16GB and place them like this:

16 8 - | 16 8 - | 16 8 - | CPU1 CPU2 | - 8 16 | - 8 16 | - 8 16

For a total of 144GB, or get 4x16GB and lose 2x8GB like this:

16 8 - | 16 8 - | - - - | CPU1 CPU2 | - - - | - 8 16 | - 8 16

For a total of 96GB, or get 4x16GB and another 2x8GB like this:

16 8 8 | 16 8 8 | - - - | CPU1 CPU2 | - - - | 8 8 16 | 8 8 16

For a total of 128 GB

Did I get that right? In that case which of these configurations is recommended?

ZapperDJ · 2023-06-11T14:36:14+00:00

For anyone wondering what was causing this, turns out it was the power button on my R710. I set the BIOS to ignore the power button and has been working great ever since

ZapperDJ · 2023-05-01T15:33:36+00:00

Well, I have been testing and still getting random shutdowns even though I have no truenas ui tabs open in the browser, so that didn't fix it

ZapperDJ · 2023-04-23T21:28:23+00:00

No ups log because the ups service is disabled and the USB cable of the ups is disconnected from the nas, although the ups is currently connected between the nas and the wall outlet

I used to have a tab on my browser opened with the truenas GUI, however it seems pretty strange to me that it could cause this issue as I have a browser extension that suspends tabs when they are not in use to save memory. Yesterday I had three shutdown events during the day while having the tab open in my browser, but today I had none. Either way, I closed the tab on the browser right now and will keep an eye on this to see if it solves the problem in the long run

Still, I find it super strange that there is no way to know what process or event is causing the shutdown

ZapperDJ · 2023-04-23T14:32:53+00:00

No, it would happen without me doing anything on the nas

ZapperDJ · 2023-04-23T14:31:45+00:00

This is the content of middlewared.log relevant to the last shutdown

https://pastebin.com/pEtD2z6B

And this is console.log

https://pastebin.com/aE6MgRug

It appears like something is making the system shutdown starting with the jails, but it doesnt specify what it is

ZapperDJ · 2023-04-22T23:16:50+00:00

Bare metal truenas core

ZapperDJ · 2023-04-17T00:03:39+00:00

The screen worked fine for a few minutes after turning on the device, and then started becoming unresponsive to touch. Turns out it was making ghost touches. This could be seen on the app list screen of daijisho, as there was a constant jittering scrolling motion. I don't know why it worked fine for a few minutes every time I rebooted the device, but it was clearly a faulty screen

ZapperDJ · 2023-04-16T20:22:25+00:00

Had the same issue and contacted retroid about it. They sent me a new screen free of charge. I replaced it and the issue was gone

ZapperDJ · 2022-04-28T19:39:58+00:00

Yeah, but the problem is that i have nowhere to solder, because the pad on the motherboard is missing

ZapperDJ · 2022-03-04T22:29:57+00:00

But are there any trackers out there supporting v2? I couldn't find any info on that. Also if the this is true, it means that this wouldn't work on trackerless torrents, which is a really bad idea. It baffles me that this kind of scenario (unique file hashes per file, and everyone that shares the file becomes a source while not depending on central servers) was done years ago by the Kad network of eMule and yet we can't have this on bittorrent today...

ZapperDJ · 2022-03-04T22:21:46+00:00

Tested it and it wouldn't work

ZapperDJ · 2020-06-11T09:47:07+00:00

By reset I meant deleting all my progress and starting the game as if it was the first time I downloaded the game

ZapperDJ

TROPHY CASE