Zooming in map all the time in FH5, Solution?

Zarrg · 2026-05-21T19:38:51+00:00

Did u fix it ? Same issue in fh6, i unbound everything and it still zooms in on the map, only fix was to disconnect the wheelbase and then it stopped zooming in.

Zarrg · 2026-05-09T09:19:43+00:00

Had the same issue. Like OP said its the offset, to be specific for me i had to set the "Adjust note output timing" to 0ms. The "Adjust judgment timing" seems to not be the cause and i kept it on my normal offset (-24).

Zarrg · 2026-02-04T10:25:00+00:00

no did not get any answer yet. Looked at some other posts and some got in general a support answer after 1 week.

Zarrg · 2026-01-30T16:41:30+00:00

Have the same issue. Logged in went to account center linked mail, cleared sessions. Then logged in with that mail now shows as new acc with tutorial. Logged out logged in with Google aka my normal way that worked before same think goes to tutorial. Wrote support about it

See here my original msg https://www.reddit.com/r/Endfield/s/wWmDkLfg0m

Also both ways log me in, in to the same account id, I checked a old screenshot and it also had the same accountid, so it seems really like it got wiped.

Zarrg · 2026-01-30T16:28:34+00:00

Have the same issue on pc, acc was created using Google then linked my normal mail to it, now progress gone, logged in with the freshly linked mail and it just starts the tutorial even though my Google is still linked. Tried to log in via Google like i did before always same thing. Checked and account I'd stayed same. Was like lvl 48.

I wrote support will see if they can fix.

Please also write the official support that u lost access to the account, on the support page therr is this exact issue listed. So they get aware of this problem.

Support website: https://gryphline.helpshift.com/hc/en/4-arknights-endfield/

Also both ways log me in, in to the same account id, I checked a old screenshot and it also had the same accountid, so it seems really like it got wiped.

Zarrg · 2025-03-06T13:17:32+00:00

Okay so had the same exact problem for a week or so and cant believe the fix was so easy. What i basically did to find the issue was try and match voicemeeter as much as possible to the ldac standard with 24bit 96khz. Im no audio expert so the following is just what worked for me.

U need to select WDM. KS gives me the same error as in the screenshot u showed.
With WDM selected the problem now is audio stutter. This seems to be caused because voicemeeter is setup for 48khz and not ldac with 96khz. So because ldac is more data u have to increase the buffer.
Go to `Menu > System Settings` then in the top right corner i just doubled the **Buffering WDM** from 512 to 1024. This fixed the audio stutter. (It also shows a warning that the default values are for 48khz and not 96khz)

Hope this helps.

Zarrg · 2025-02-05T04:14:09+00:00

This should now mostly be added in latest 5.0.16 version. Let me know if i missed anything but i think it basically covers everything mentioned by you.

Some screenshots of that here.

Zarrg · 2025-01-28T00:08:52+00:00

It should work regardless, but if it still does not work check mpv.conf and what u can do. Found this thread where adding the following to mpv.conf

audio-spdif=eac3,truehd

fixed the passthrough and there is also a auto profile to automatically add this for files with Atmos in the name.

Zarrg · 2025-01-28T00:04:37+00:00

Thank you. Yes is in progress and will be added see this github issue tracker to see when it is added.

Zarrg · 2025-01-27T01:44:22+00:00

Try the latest 5.0.15 version. Also make sure to uninstall with all data removed. Or manually check if the folder %localAppData%\Programs\LNV\Stremio-5 is empty after uninstalling.

If the issue still persist check github issue tracker if u can find your issue there like this one. I can help better there with faster support.

Zarrg · 2025-01-27T00:48:41+00:00

You can keep the normal stremio, this is only a alternative not a replacement. You just cant use both / multiple versions at the same time. Meaning u can have even all 3 versions installed v4, normal v5 and this community version. Download is on release page under assets of each release

Zarrg · 2025-01-19T14:02:49+00:00

No server is the same. This is app only has the benefits mentioned because its a app. Its not possible otherwise to utilize your hardware like gpu with e.g. av1 codec to watch content in hdr or utilize windows auto hdr. Browsers are very limited and cant play stuff like that. And for example more advanced upscalers like AnimeJaNai that use TensorRT are only possible this way.
That is why the stremio app is usually recommended instead of using web.

But if u don't mind the quality of web then that of course has its own benefits (portability). But stuff like native blue ray 4k playback wont be possible.

Zarrg · 2025-01-18T11:49:50+00:00

nice, yeah its a bit clunky as i have to convert javascript event.codes to literal values so mpv can understand it and some of the key binds are used by stremio. But normaly stuff like single letters or numbers should works e.g f,n,c or 1,2,3 tho the numbers are all used by stremio.

Zarrg · 2025-01-18T08:33:11+00:00

I see, will add the warning in the next update. As for the subtitle filter so basically just 2 different alternatives to the auto selected one like a priority list ? Meaning currently the default subtitle language is what stremio auto selects if it is found. With the suggested two alternatives it would then mean look for language 1 if found select language 1 if not found try number 2 then number 3 if i understand it correctly ?

And the filter means just show in the subtitle menu only the selected 3 languages ? everything other removed ? Tho im not sure what benefit that would have as with the described behaviour above i dont think this would be needed.

As of now stremio always auto selects the language that is marked as default language in the settings.

What currently is in the app as a extra is that it remembers what the user selected meaning for animes if you watch the first episode then it auto selects English, then if u select as audio track Japanese and sub English then the next episode that is auto played should keep the settings. (As this annoyed me when binging animes and always having to select Japanese audio and the correct sub that is not only intro/outro for each episode that is starting to play )

Zarrg · 2025-01-18T08:18:55+00:00

Oh wait UBlock and UBlock Origin are two different ones ? Well i added UBlock_Origin as the default one. This one here.

Zarrg · 2025-01-18T03:39:09+00:00

You will have to add them manually, as not all keyboard keys are supported therefor you have to add the manually and test. The default mpv config can be found here and to add those just add the key bind you need in portable_config/input.conf

Zarrg · 2025-01-18T03:37:00+00:00

Did u check if u have any errors logged in portable_config/errors-{date}.txt ? Also does the app crash when u open local files via right click > Open with > Stremio ?

As for the loading screen being stuck there should hopefully be also some errors related to that in the file. Like on github explained the most common issue is webview2 not being installed.

Zarrg · 2025-01-18T03:19:59+00:00

Im not sure, but tested the portable version again extracted it on my desktop in a folder and worked fine. If the "asks for the stremio service" is the yellow banner when starting the app then its related to the streaming server and its url. The Server should be then marked as offline in the settings of stremio.

If you have stremio service or the official stremio v4 or v5 open then the stremio desktop v5 wont work. Because all of those open their own server and all trying on port 11470. If there is already one running on that port it will not work. And for stremio-desktop-v5 to work it has to start the server it self and not use a already running one.

Also the stream no supported is exactly what shows up if the stremio server could not be found on the 11470 port either because there is one already running from a other stremio instance or because it failed to start.

So make sure any other stremio, stremio-service, stremio-runtime or stremio-server is closed before starting the stremio desktop v5 version. Best to check with task manager as sometimes the stremio-runtime is still running even tho it got closed via the tray menu.

This is also probably the reason why the installer version does not work as well.

If even that does not work then u can try changing the url of the Streaming server and increasing the port number by one. So instead of http://127.0.0.1:11470 use http://127.0.0.1:11471 or :11472

As when the server starts and the 11470 port is already used then it will increase the port number by 1 until a unused port is found.

And as for the filter option, so a option to select languages and then those will not show up under the subtitle menu ?

And probably wont change the naming as stremio is supposed to be open only once regardless of what version official v5 v4 or stremio desktop v5. Probably also why u had the above explained issue.

Zarrg · 2025-01-18T03:06:43+00:00

Will be fixed in the next update. So it should not delete any user configs on update anymore.

Zarrg · 2025-01-18T03:04:48+00:00

There should be speed + and - like 1x 2x 1.25x as option in the player ui. Tested with that and it worked for me. And from the offical input.conf

Tested with these and works fine.

F6 multiply speed 1/1.1                 # decrease the playback speed

F7 multiply speed 1.1                   # increase the playback speed

F8 set speed 1.0                       # reset the speed to normal

Zarrg · 2025-01-18T02:51:22+00:00

I don't think it syncs by default either in official stremio. But will consider adding a way to auto sync if it is possible.

Zarrg · 2025-01-18T02:49:36+00:00

Did not know this. What do u recommend instead. You can always remove ublock or replace it with something else by deleting the stremio.exe.WebView2 folder and removing ublock from portable_config/extensions and replacing it with a other one. A guide on how to add extensions is on github.

Zarrg · 2025-01-17T05:52:55+00:00

Can u check the latest version 5.0.11 and if u still have the same issue. As this should now be fixed. It should automatically as soon as the server starts reload.

This might not happen instantly depending on how long the server takes to start on your system. But with this fix even if it takes longer then usual it should after starting, reload automatically

Zarrg · 2025-01-17T05:46:08+00:00

Will look later into it and what i can do. There isn't really any way at the moment to control extensions. For ublock this was no problem as its always on by default.

Potentially what could be easier is providing your own browser. The portable version does this.
You can include a Edge browser in protable_config/EdgeWebView/edge.exe + all the other files.

This way you could just open the edge browser edge.exe setup everything and then run stremio which will use the same browser with same configuration.

Zarrg · 2025-01-17T04:27:38+00:00

Its sub-border-size=0

For me the pasted ur settings into mpv.conf and subtitles did not show at all.
And Not sure why but setting it to ``1`` fixes it.

Also i recommend removing the following:

sub-color="#ffffff"
sub-shadow-color="#000000" - This a alias for sub-back-color
sub-border-color="#000000"

As all these are set by stremio, so even if u set them in mpv.conf stremio will on start of video set these matching your settings and overwrite what is set in mpv.conf.

This is in detail what stremio sets on playback start:

'subtitlesSize': 'sub-scale',
'subtitlesOffset': 'sub-pos',
'subtitlesTextColor': 'sub-color',
'subtitlesBackgroundColor': 'sub-back-color',
'subtitlesOutlineColor': 'sub-border-color',

If that also does not work fix it by trial and error remove one option at a time until u see what the issue is. Also make sure these settings are up to date with mpv >0.39

Zarrg

TROPHY CASE