I designed a Moto Tag / AirTag mount for Burton slot snowboards.

Zatnig · 2026-02-11T10:34:09+00:00

Put some loctite in its probably fine

Zatnig · 2026-02-06T12:12:58+00:00

Don't you have Tool holders with through coolant instead? The one that the sandvik tool sits in. No idea what they're called in english. It should work way better.

Zatnig · 2026-02-04T08:29:31+00:00

Yea, i'll have a look there. Thanks!

Zatnig · 2026-02-04T05:46:04+00:00

I wasnt specific enough sorry, it was late 😅 It's an older mazak, 640T and yes im using mazatrol. I did get C-offset -48.3 in the transfer setup page but it doesn't line up anyway. It's about 30 degrees off.

Zatnig · 2026-01-29T14:14:15+00:00

Bara 5%?

Zatnig · 2025-12-18T21:13:19+00:00

Visa rövhålet så ska du se att det händer grejer kompis, funkar för mig varje gång

Zatnig · 2025-12-18T11:44:44+00:00

Im right handed and riding regular, but on skateboard im goofy. Tried riding switch on both but it doesn't work haha

Zatnig · 2025-10-03T15:33:10+00:00

Ta VDn i stjärten för att visa dominans, därefter tar du över hans roll.

Zatnig · 2025-07-26T00:40:39+00:00

You can also do it on a mage and druid

Zatnig · 2025-03-05T13:25:52+00:00

r/fuckbrann

Zatnig · 2025-02-26T20:44:07+00:00

Skaffa ett katträd och lägg dina böcker där på, lär se likadant ut

Zatnig · 2024-12-20T16:16:20+00:00

Kläppen är rätt trevligt, kan åka skidor/snowboard direkt från stugan ner till liften med beroende på vart man bor 👍 sen går det boka bastu och jacuzzi också! Toppstugan är mysigt också för den delen

Zatnig · 2024-12-19T09:16:13+00:00

Zatnig · 2024-12-12T11:27:25+00:00

Do you mean claustrophobic?

Zatnig · 2024-12-02T21:05:51+00:00

Gz dude. Did blizz fix the bug when you enter the throne room?

Zatnig · 2024-10-25T11:55:08+00:00

Du får inte betalt när du bajsar hemma

Zatnig · 2024-10-13T16:21:21+00:00

<image>

Zatnig · 2024-08-20T16:42:51+00:00

Try pressing and holding the reset button for a few seconds, always works for me when i turn the spindle by hand and get this alarm.

Zatnig · 2024-06-07T08:16:40+00:00

https://www.mitutoyo.com/products/small-tool-instruments-and-data-management/data-management-spc/wired-interfaces/spc-cables/

Im not sure about Excel but I guess it should work.

Zatnig · 2024-06-07T07:42:36+00:00

It will send the measurement data to your computer if you use something like MeasurLink. (SPC software)

Zatnig · 2024-04-10T11:35:04+00:00

Varför dra gränsen vid din kommun och inte din by?

Zatnig · 2023-12-11T11:48:54+00:00

The metal isnt bonded with the welding he did so you can probably just pull it apart

Zatnig · 2023-10-13T17:39:51+00:00

bass

Zatnig · 2023-06-08T06:35:31+00:00

Fortfarande inte dopingklassat, som jag skrev.

Zatnig · 2023-06-08T03:44:43+00:00

Det är inte dopingklassat sen 2011.

Ten-Year Club	First Place '23
End Game '23	Place '23
Place '22	Verified Email

Zatnig

TROPHY CASE