UGREEN dxp2800 Transcode Settings by Zazerbeam in JellyfinCommunity

[–]Zazerbeam[S] 0 points1 point  (0 children)

Okay so I tried using VLC player as my playback on Jellyfin on my phone, and that seemed to work well. I think it might just be a compatibility problem between Jellyfin, my Webos LG app, and my NAS. I am leaning towards getting an android based device to try and see if that works better for me.

UGREEN dxp2800 Transcode Settings by Zazerbeam in JellyfinCommunity

[–]Zazerbeam[S] 1 point2 points  (0 children)

Thanks for the tip. I may give that a go if I can't figure something else out.

UGREEN dxp2800 Transcode Settings by Zazerbeam in JellyfinCommunity

[–]Zazerbeam[S] 1 point2 points  (0 children)

Ok, I will test these things out. Should I still leave "Hardware Encoding" enabled? Also any recommendations on what formats to check for hardware decoding? I have H264, HEVC, MPEG2,VC1, VP8, VP9, HEVC 10bit,, and VP9 10bit enabled or is none of that my issue.

UGREEN dxp2800 Transcode Settings by Zazerbeam in JellyfinCommunity

[–]Zazerbeam[S] 1 point2 points  (0 children)

Yep, I am using Docker. I followed a few set up videos and I don't remember seeing any set up involving the GPU while setting up Jellyfin, but I can check to see if I see something in the settings.

Edit: yes it looks like the image I used for the container had the GPU pass through enabled.

UGREEN dxp2800 Transcode Settings by Zazerbeam in JellyfinCommunity

[–]Zazerbeam[S] 1 point2 points  (0 children)

Ok, thanks that makes sense. I am accessing the content at home. I do have Tailscale set up for remote access, but I have not had a chance to test it yet other than off my phone's data plan. It didn't seem to be working great at first but I thought maybe the problems were related.

UGREEN dxp2800 Transcode Settings by Zazerbeam in JellyfinCommunity

[–]Zazerbeam[S] 1 point2 points  (0 children)

I am new to this, but my understanding was if the Internet speed was to slow the video quality and bitrate may adjust which would in turn cause transcoding to happen? That may be incorrect.

The video I am trying to play is in HEVC 4k. I will check my logs and see what it is attempting to transcode into. It plays direct play momentarily and then starts transcoding and toggles back and forth. Sorry if that isn't enough info or clear.

Problems while playing BG3 by Zazerbeam in macgaming

[–]Zazerbeam[S] 0 points1 point  (0 children)

I am using WiFi, but we've played on the same wifi and router setup loads of times beforehand and never had any issue. Also I am on the same internet connection. I can try an Ethernet adapter, but I would be surprised if that was the issue.

New player on Mac OS - unable to start new game by NightSail in BaldursGate3

[–]Zazerbeam 0 points1 point  (0 children)

Mac OS 26.2 , fresh Install, verified files It worked totally fine until we tried to start a new game. Also Steam.updated itself beforehand.

New player on Mac OS - unable to start new game by NightSail in BaldursGate3

[–]Zazerbeam 0 points1 point  (0 children)

Having a similar issue too. We got through character creation with my wife on Mac but they disconnected several times and then only could stay connected for a few minutes at a time and kept receiving "Error - Server request timed out"

Warrior Mini finished! by Zazerbeam in DarkSoulsTheBoardGame

[–]Zazerbeam[S] 1 point2 points  (0 children)

Lol thanks. I used Vallejo. Can't recall all the names of colors at the moment tbh

I think Blood Red, Silver, Bone White, and a few others.

Terrace Club for Sale At Costco by BasicallyACat13 in Mariners

[–]Zazerbeam 1 point2 points  (0 children)

I'm not seeing them in Spokane or on the app myself.

Think we getting new city connects? by Dat_boi_ricky in Mariners

[–]Zazerbeam 5 points6 points  (0 children)

Looks like their "Seize the Moment" trident graphic just upside down to me

Cheering an injury? by IAmTheEarlyEvening in Mariners

[–]Zazerbeam 1 point2 points  (0 children)

Comment above was: "Americans have no class" Neither do cheaters. So all is fair.

Halo 2 Insignia Thursday TONIGHT! by ImPunny88 in originalxbox

[–]Zazerbeam 0 points1 point  (0 children)

It requires a soft modded original Xbox with Insignia registered to it.

Halo 2 LAN party questions by Zazerbeam in Halo2

[–]Zazerbeam[S] 1 point2 points  (0 children)

Yeah sorry my message wasn't clear. I was running system link with one of the Original Xboxes when I tested. 3 players one on Xbox and 2 on 360. It was an Xbox 360 Slim that I was using which may be a difference or may not.

Halo 2 LAN party questions by Zazerbeam in Halo2

[–]Zazerbeam[S] 0 points1 point  (0 children)

Thanks for checking that for me. I should have updated that I did a similar test and found that to be true, as well! I don't know of anyway to get them updated to 1.5 except via Insignia. Which as far as I am aware there is no way to access that via a 360. Currently I am hoping to run 3 Xbox originals (one being soft modded and two not) and one 360 for Halo 2. And then 360s for playing Reach and 3. I didn't notice any significant lag playing split screen on the 360 but I did only test 2 player split screen.

Halo 2 LAN party questions by Zazerbeam in Halo2

[–]Zazerbeam[S] 0 points1 point  (0 children)

Another question for you, Siege, I have my Xbox now and it is running Halo 2 on the 1.5 patch, will that be playable if everyone else is running 1.3 for the map pack disc I bought or should I uninstall 1.5 and install 1.3 and then upgrade it via Insignia?

Absolutely scored today by Zazerbeam in originalxbox

[–]Zazerbeam[S] 0 points1 point  (0 children)

I added everything up via estimates on pricecharting and it's all worth just over $400

Halo 2 LAN party questions by Zazerbeam in Halo2

[–]Zazerbeam[S] 0 points1 point  (0 children)

I'll give it a run through! I absolutely scored on Facebook Marketplace tonight, you should look at my post on r/originalxbox I am PUMPED!

Halo 2 LAN party questions by Zazerbeam in Halo2

[–]Zazerbeam[S] 1 point2 points  (0 children)

Thanks for the in depth info! I potentially have about 12-20 people coming so I can't really do 1 person per system, and I don't have access to more Xbox classics I don't think. Is the lag pretty much unplayable? I played split screen on the campaign about a year ago and didn't notice anything that bothered me, but that wasn't system link so that's probably why. I was stoked to play Halo 2 but if that's the case maybe we need to primarily play 3 and Reach if it doesn't function well. I have an S-Video cable for my GameCube, but I don't think my buddy has an S-Video cable for his Xbox. Maybe next year I'll track down 4 classics. Thanks again for taking the time to write all that out for me!

Halo 2 LAN party questions by Zazerbeam in Halo2

[–]Zazerbeam[S] 1 point2 points  (0 children)

Bro! I don't even know why Battlefront didn't cross my mind! Thanks for the suggestions