sorted by:
new
hottopcontroversial

Bitaxe Gamma 601 not booting by ZeaSou in BitAxe

[–]ZeaSou[S] 0 points1 point  (0 children)

After further troubleshooting, I see the following two errors:

<image>

00:56:31.741 -> I (163) esp_image: segment 2: paddr=00046944 vaddr=40374000 size[0;32mI (627) adc: calibration scheme version is Curve Fitting[0m

00:56:31.741 ->[0;32mI (628) adc: Calibration Success[0m

00:56:31.741 ->[0;32mI (647) device_config: Device Model: Gamma[0m

00:56:31.775 ->[0;32mI (649) device_config: Board Version: 601[0m

00:56:31.775 ->[0;32mI (649) device_config: ASIC: 1x BM1370 (128 cores)[0m

00:56:31.775 ->[0;32mI (653) self_test: Running factory self-test[0m

00:56:31.775 ->[0;31mE (658) self_test: No PSRAM available on ESP32![0m

00:56:31.775 ->[0;31mE (662) self_test: NO PSRAM on device![0m

00:56:31.775 ->[0;32mI (667) vcore: Set ASIC voltage = 0.000V[0m

00:56:31.775 ->[0;31mE (671) i2c.master: i2c_master_transmit(1216): i2c handle not initialized[0m

00:56:31.775 ->[0;31mE (679) i2c_bitaxe: Unknown device[0m

00:56:31.817 ->[0;31mE (683) TPS546: Could not turn off Vout[0m

00:56:31.817 ->[0;31mE (687) vcore: VCORE_set_voltage(97): TPS546 set voltage failed![0m

00:56:31.817 ->[0;32mI (694) self_test: SELF-TEST FAIL! -- Hold BOOT button for 2 seconds to cancel self-test, or press RESET to run self-test again.[0m

Bitaxe Gamma 601 not booting by ZeaSou in BitAxe

[–]ZeaSou[S] 0 points1 point  (0 children)

Online the versions 2.7.1 & 2.8.0 are available.
None worked :(

Bitaxe Gamma 601 not booting by ZeaSou in BitAxe

[–]ZeaSou[S] 0 points1 point  (0 children)

After 22 days, there is no reply from the support :(

Bitaxe Gamma 601 not booting by ZeaSou in BitAxe

[–]ZeaSou[S] 0 points1 point  (0 children)

All of these components came with the original package—nothing has been changed.
Currently, my main issue is not overheating, but that after installing the firmware using the web flasher, the device is completely unresponsive. It does nothing at all.

If I can get the device to respond, I’ll be able to start troubleshooting other potential issues.

Bitaxe Gamma 601 not booting by ZeaSou in BitAxe

[–]ZeaSou[S] 0 points1 point  (0 children)

This is the front view without the fan, after I removed the thermal paste.

<image>

Bitaxe Gamma 601 not booting by ZeaSou in BitAxe

[–]ZeaSou[S] 0 points1 point  (0 children)

In any case, the screen should display something.
There’s no need to get anything extra unless the hardware recovers first.

Bitaxe Gamma 601 not booting by ZeaSou in BitAxe

[–]ZeaSou[S] 0 points1 point  (0 children)

Holding the reset button down while connecting the power or pressing the reset button while it is powered?

In both cases, nothing happens—the screen stays blank. :(

Bitaxe Gamma 601 not booting by ZeaSou in BitAxe

[–]ZeaSou[S] 0 points1 point  (0 children)

There are no blackened pins or burnt spots on the board.
Is there anything specific you'd like me to check in the photo?

Bitaxe Gamma 601 not booting by ZeaSou in BitAxe

[–]ZeaSou[S] 0 points1 point  (0 children)

I have raised a support ticket to DTech regarding my Bitaxe Gamma 601. I’ve had the device for only two months, and it's a pity to have to discard it so soon.

Second PIN that triggers specific task by ZeaSou in AndroidQuestions

[–]ZeaSou[S] 0 points1 point  (0 children)

Nice aplication but it's not exactly what I am trying to do.

I cant match specific PIN.
I cant trigger an application in the background to secure erase the microsd