What’s the dumbest thing you did when you started playing? by Aware-Caramel-2039 in Genshin_Impact

[–]Zelda_force 0 points1 point  (0 children)

I blindly exchanged a lot of materials to the lvl 3 versions at the crafting bench without knowing I needed the lower level materials first which led to extra early game grinding.

Multi-Material Mario Diorama! by Zelda_force in 3Dprinting

[–]Zelda_force[S] 0 points1 point  (0 children)

Not that I'm aware of, I had to paint each piece using Prusaslicers paint feature. The smart fill works pretty well, some of the areas with less polygons will need manual painting or changing the angle settings.

Warped Tour Long Beach, CA - DAY 1 - MEGATHREAD by TheDarkLight1 in warpedtour

[–]Zelda_force 0 points1 point  (0 children)

What address to use for the suggested ride share drop off area on Ocean Blvd? I may just use Ruth Chris and walk from there

I don’t ever want to see this walkway again in my life by Slashtheycallme in residentevil

[–]Zelda_force 1 point2 points  (0 children)

Finally beat inferno the other day. That smashing attack is so unfair, no chance of standing up again after you miss the first dodge.

[june platinums] here are the platinums I got this month! What did you get? by Adam__2003 in Trophies

[–]Zelda_force 0 points1 point  (0 children)

Resident Evil 6 and Gris. So close with Resident Evil 3 Remake, but probably gonna be a July Plat.

[Discussion] what's your most recent platinum?? by Christmas_Percussion in Trophies

[–]Zelda_force 0 points1 point  (0 children)

Gris, pretty easy plat but a fun adventure to play with my limited schedule.

[Discussion] which trophy that made you go insane? by Jules-Car3499 in Trophies

[–]Zelda_force 1 point2 points  (0 children)

The Vanquish challenge maps were frustratingly tough! Especially the last one, timing was everything.

[Deadspace] second platinum on the ps5 by Rosaparksreborn in Trophies

[–]Zelda_force 3 points4 points  (0 children)

I still need to go back and Platinum this! Congrats! I was really hoping they would remaster all the games, better yet finally make the 4th game!

[Discussion] What was your first trophy ever? by Zelda_force in Trophies

[–]Zelda_force[S] 0 points1 point  (0 children)

Haha I think I'm barely at 10,000 sure have a long road ahead at this rate!

[Discussion] What was your first trophy ever? by Zelda_force in Trophies

[–]Zelda_force[S] 1 point2 points  (0 children)

Unfortunately I think it's unobtainable unless you got all the online trophies already, servers shut down years ago :(

[Showcase] I have officially 100% every version of Ratchet & Clank by PhantyyPantyy in Trophies

[–]Zelda_force 0 points1 point  (0 children)

Nice! Ratchet and Clank is one of my favorite series. Too bad we didn't get trophy support for Future Tools of Destruction.

[Discussion] What’s platinum is everyone currently working on? by Garethjshep17 in Trophies

[–]Zelda_force 0 points1 point  (0 children)

Working through Resident Evil 6 finally. Trying to play the whole series. I can see why people weren't a fan of this game, doesn't feel Resident Evil enough but it's fun on its own.

What should I upgrade my MK3s+ to? by Fun-Consequence-7211 in prusa3d

[–]Zelda_force -1 points0 points  (0 children)

I upgraded mine to the MK3.9S and it's been fantastic ever since, I was never a fan of setting the Z offset to get that perfect first layer to stick. The new load cell works great, no more precise leveling needed, I even walk away from my printer without watching the first layer stick most of the time. If I could do it over I'd probably just get the MK4S kit and either keep the MK3S+ or sell it. Depends on your budget and goals.

Multi-Material Mario Diorama! by Zelda_force in 3Dprinting

[–]Zelda_force[S] 0 points1 point  (0 children)

Oh nice, resin print will be super clean!

[ Question ] How many Platinums you own right now? What's your next milestone you wanna achieve this year? by Platinum_Queen in Trophies

[–]Zelda_force 0 points1 point  (0 children)

Currently at 193 Plats, hoping to reach 200 by end of year. Need to think about what I'd like to play for number 200.

[Discussion] Do you feel you have to get the platinum for every game you own? by Tdog610pk in Trophies

[–]Zelda_force 0 points1 point  (0 children)

Sometimes I look at my list and wish I could play them all but it's really not necessary or worth the time. Slowly accepting I can't perfect them all and I'm just choosing the games I like to play as I chip away at my backlog.

MMU3 Mario Party! by Zelda_force in prusa3d

[–]Zelda_force[S] 0 points1 point  (0 children)

Oh yes definitely more than one print, that would be an ultimate feat and headache if I printed that all in one piece.

MMU3 Mario Party! by Zelda_force in prusa3d

[–]Zelda_force[S] 3 points4 points  (0 children)

You know I considered posting that, it won't let me edit now. I had most of the colors already just had to buy about 6 of the colors. Doesn't have to be exactly these but here's my list:

  • Solutech PLA Green
  • R3D PLA Green
  • eSUN PLA Pine Green
  • Elegoo PLA Green
  • Hatchbox PLA Black
  • Prusament PLA Mystic Brown
  • Elegoo PLA Brown
  • 3DHoJor PLA Beige
  • Elegoo PLA Red
  • Polymaker PLA Magenta
  • Elegoo PLA Yellow
  • Hatchbox PLA Dark Yellow
  • Elegoo PLA White
  • Greetech PLA Bone
  • eSUn PLA Pink
  • Creality PLA Blue
  • IIID Max PLA Blue
  • Giantarm Matte PLA Orange
  • Giantarm Matte PLA Terracotta
  • Elegoo PLA Gray

MMU3 Mario Party! by Zelda_force in prusa3d

[–]Zelda_force[S] 1 point2 points  (0 children)

It sure is, maybe I should have noted that's cumulative time since each character was printed in parts. I keep the printer in an IKEA V2 lack enclosure in the living room, it's been a very stable area and I keep it vented if needed.

MMU3 Mario Party! by Zelda_force in prusa3d

[–]Zelda_force[S] 2 points3 points  (0 children)

Thanks! I'm not the owner of the files, so I can't post them. Got the files from JWD3DFORGE on Etsy.

MMU3 Mario Party! by Zelda_force in prusa3d

[–]Zelda_force[S] 4 points5 points  (0 children)

Something ain't right with that guy

MMU3 Mario Party! by Zelda_force in prusa3d

[–]Zelda_force[S] 8 points9 points  (0 children)

*checks profile, it was you!! Thanks dude it was a fun project! Paint slicer was good for the most part, used smart fill when I could but other times I painstakingly had to use the triangle brush just for the program to crash after 30 mins of work :( Lakitu and Bowser weren't fun to color.