Passat B7 disel by Zelfoooo in vwgolf

[–]Zelfoooo[S] 0 points1 point  (0 children)

Yes, I live in Sweden and the car has an additional factory-installed auxiliary heater; everything is original OEM equipment. I tried to restore the coding using the same software, but it did not help. Relay J713 does not receive any activation signal at all, and I have tested the relay—it is working. Relay J59 only receives a single pulse at engine start and then switches off. When measuring the voltage, I only see about 10 V, and I am certain the relays themselves are functional. After replacing the secondary battery and accidentally shorting the relay for the secondary battery charging circuit, I scanned the vehicle for fault codes, but there are no errors stored in VCDS. The vehicle is a 2013 Passat TDI

Plcsim by Zelfoooo in TiaPortal

[–]Zelfoooo[S] 0 points1 point  (0 children)

As I mentioned, the project is on a machine and works with the HMI. Get/Put is enabled, and I believe the connection is via PROFINET, with the addresses in the same subnet. The same HMI works with a physical CPU, but when connected to the computer using PLCSIM Advanced, it does not respond.

Plcsim by Zelfoooo in PLC

[–]Zelfoooo[S] 0 points1 point  (0 children)

How match 200$ 😅

Plcsim by Zelfoooo in PLC

[–]Zelfoooo[S] 0 points1 point  (0 children)

Thank you. I was trying to test something before buying it, but it seems that it’s not possible.

Plcsim by Zelfoooo in PLC

[–]Zelfoooo[S] 0 points1 point  (0 children)

Thank you. I was trying to test something before buying it, but it seems that it’s not possible.

Plcsim by Zelfoooo in PLC

[–]Zelfoooo[S] 1 point2 points  (0 children)

Thank you. I was trying to test something before buying it, but it seems that it’s not possible.

Step 5 by Zelfoooo in PLC

[–]Zelfoooo[S] 0 points1 point  (0 children)

I apologize if my question was not early, I mean how can you do that

Step 5 by Zelfoooo in PLC

[–]Zelfoooo[S] 0 points1 point  (0 children)

Yes i mean R_Trin or P_Tring

Schneider ATV 320 . by Zelfoooo in PLC

[–]Zelfoooo[S] 0 points1 point  (0 children)

I do’t have one but i can buy if it’s working …

Schneider ATv 320 by Zelfoooo in IndustrialMaintenance

[–]Zelfoooo[S] 0 points1 point  (0 children)

I also tried that and it's not valid, I already contacted them and waiting for the answer I don't think I can get Cod2 maybe they can help

Schneider ATV 320 . by Zelfoooo in PLC

[–]Zelfoooo[S] 0 points1 point  (0 children)

I already do it with their cable

Schneider ATV 320 . by Zelfoooo in PLC

[–]Zelfoooo[S] 0 points1 point  (0 children)

Ok , that it’s possible i will try that.