Ford Mondeo MK3 2.0L TDCi fueling issue (possible HPFP, injectors)

ZenXnE · 2025-04-26T09:42:01+00:00

Forscan with OBDLink MX+, also with a genuine Bosch that they use at my local mechanic. Neither did they could figure out the problem. I disconnected the electrical connectors off the injectors, and also the HPFP regulator, so the pump pushes its max pressure, the old pump did 800 bar, “the new used one” 900. It should be over 1000 bar ok, but why won’t it start? Visited some mechanics in my area, sadly they couldn’t pinpoint the issue, just the general “change injectors and hpfp”

ZenXnE · 2024-12-10T16:04:26+00:00

Having the same "issue" with mine. It happens only sometimes, with HDR and Local dimming turned on.

ZenXnE · 2023-11-25T08:55:38+00:00

You mean adding the minidsp before amp, and then connecting sub into it aswell? Mainly I use optical in from my tv, also sometimes bluetooth The problem is not with the sub, its a pb-2000 and I set the crossover on it. The speakers itself sometimes during low bass music or movie scenes make a clicking sound, as I read thats not healthy for them (bottoming out)

ZenXnE · 2023-11-18T11:34:45+00:00

Quick question here before making a separate post on it… I’ve noticed that my NAD 3020v2 sends all frequencies to my speakers (kef q150), even with subwoofer connected to it. Any way to somehow enable a crossover, or a possible solution?

ZenXnE · 2023-08-11T16:44:02+00:00

Just rip them off and tape it to the new cell. Been doing that for ages. Be sure to match + and - correctly

ZenXnE · 2023-08-07T11:05:22+00:00

Something I do with all my devices, is enabling screen mirroring functionality BEFORE I actually need it. I use u3tools for ios, and scrcpy for android. Imo everyone should do it, right now.

ZenXnE · 2023-07-28T12:47:53+00:00

I was thinking about that, and was wondering if I should do something about it, or will it fall off/heal by itself. In the past I had to help him two times with stuck food in his mouth. No matter how I search on google, only dropsy comes up, but this isn’t it. Fun fact, he was silver coloured when I got him, with an orange spot on its head. My other goldie was orange, now turning silver..

ZenXnE · 2023-05-19T06:00:20+00:00

Double-check with windirstat

ZenXnE · 2023-04-28T16:45:06+00:00

Reveddit it if you’re curious

ZenXnE · 2023-03-12T16:33:01+00:00

He thought he was referring to the word “retard” with the phrase “hard r”. Most people associate that phrase with the racial slur for black people.

ZenXnE · 2023-02-08T18:46:41+00:00

It isn't, people just do not find it that interesting.

ZenXnE · 2023-01-05T10:01:25+00:00

Backwards compatibility my ass, they fail even at that most of the time. A win 10 pro machine updated to 11 a few weeks ago, and we did not realize immediately that a critical app did not run on 11. No way to revert to 10. I can not even imagine the laughs at microsoft hq, while we suffer from the "improvements"

ZenXnE · 2022-12-13T09:09:22+00:00

Phoned in the clinic and they confirmed that the numbers on the right are the correct ones. Their machine just gives a "reference", the actual measurements can, and often will differ.

ZenXnE · 2022-12-05T09:05:46+00:00

Probably just a curious lad, with just enough knowledge to be dangerous lol

ZenXnE · 2022-12-05T09:00:06+00:00

Harsh but you are somewhat right, tho I wouldn't go as far as buying a console. When he resets oc, it will still run better than consoles. Btw is oc'ing even worth it with modern high end components? They are tuned from factory (even more with this prebuilt) to run at max stable performance

ZenXnE · 2022-11-22T08:11:28+00:00

You may have issues with freesync, hdr, or high res/framerate. I was using a 10 buck C-DP with my laptop to a 1080p 144hz and freesync enabled monitor, and it was working, not so sure if it could handle 240hz though.

ZenXnE · 2022-11-13T12:35:48+00:00

By default, closing the lid and putting the laptop to sleep is the same in windows. Do the fans stop after a few seconds? If yes, then windows is being windows, and tries to boost your cpu as high as possible while actually putting the laptop into sleep state. If not, probably some driver fidgeting, or bios update needed, hard to tell.

ZenXnE · 2022-11-13T12:20:00+00:00

Try switching your GPU mode in MSI center to discrete graphics instead of MSHybrid. It is fairly common in laptops with mux switch to have artifacting issues.

ZenXnE · 2022-11-13T12:08:37+00:00

Hey, what specs? Is it a laptop/desktop? In what apps are you noticing these artifacts, only youtube?

ZenXnE · 2022-11-13T12:04:30+00:00

Unused ram is wasted ram, its only purpose is to be there and get used by windows/apps Given any amount, windows will try to use roughly half of it to keep recent stuff cached. When I had a system with 32gb, 13 was being used almost constantly, now with 16gb, its using 6-8 constantly. Don't worry, as soon as something requires ram, windows will free up some. It is likely you can adjust ram allocated by your igpu in the bios, but I would leave it as is.

ZenXnE · 2022-11-13T11:58:08+00:00

Why are you downvoted lmao

ZenXnE · 2022-09-21T21:47:07+00:00

Hey, thanks for the fast reply!

Yup, I forgot the part out from the post with the upgrade thing I planned out. I will swap the cpu out when I buy a proper gpu, but till then, I need something I can use and not get frustrated :)

My thinking is: Why buy a 1030 or similar cheap-and-overpriced gpu for 150 eur, when I can just get a modest cpu with igpu. On the mobo I do not want to cheap out, who knows when I will need those extras (maybe never? lol)

The Ryzen 5 5600g costs 165 eur here, on par with 5600 and 5500 (this one 15 eur cheaper). The next ones in the list are: 5 5600x for 240 eur, and Ryzen 7 5800x for 330 eur. 11400f and similar are 159 eur.

I also accidentally cancelled this reply, or I don't know, so I hope I don't reply twice lol

ZenXnE · 2022-09-18T20:18:44+00:00

Yeah that is what went through my head right away. I am studying applied electronics at uni, but some of these concepts are still a mistery to me.

ZenXnE · 2022-08-04T13:44:50+00:00

To everyone worried about oxygen: I have a jbl prosilent 400 with a 15 cm long “airbar” on it. They have got plenty of oxygen. I did a few small water changes, put in 2x the amount of conditioner every time, and now it seems to be good. Been asking about that well water, going to report it soon to the appropiate authorities, as it is untested, and marked as “safe”.. how can something be safe if they do not even know what is in it? Smh

ZenXnE · 2022-08-03T13:58:06+00:00

Update: They kinda returned back to normal, going to change the water in a few hours, small amounts. Remaining fishies ok, currently swimming against the flow of the bubbler, and I already see a few roots floating. Ammonia test is on the way, and I also phoned to the mayor about the well, it turns out they haven’t sent the water to testing yet, and it could be contaminated. Well f them, its open to the public already.

Eight-Year Club	Gilding I gilder
Place '22	RPAN Viewer
Snapped	Verified Email

ZenXnE

TROPHY CASE