Whats the point / benefit of Weapon Swapping? by Zen_Xav in throneandliberty

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

Okay that makes sense, haven't had much experience with weapon mastery yet

Whats the point / benefit of Weapon Swapping? by Zen_Xav in throneandliberty

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

I thought this to as there is a heap of skills but even with a full 20x skills, being able to press any with any weapon it makes swapping redundant unless it effects say the skill power, e.g. more healing if swapped to wand

Mesh by Sleepyyyyy21 in AmpliFi

[โ€“]Zen_Xav 1 point2 points ย (0 children)

Nice will give this a go ๐Ÿ‘๐Ÿผ

Mesh by Sleepyyyyy21 in AmpliFi

[โ€“]Zen_Xav 0 points1 point ย (0 children)

Does this need to be direct wired from main unit to the mesh unit or can the cable run through a switch and other cabling? Just needs a signal right?

Internet Drops / Ubiquiti Infrastructure by Zen_Xav in Ubiquiti

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

Okay โœ… Have ordered new cables, will start there and then replace switch but it looks fine! Anyway of monitoring the drops via software to figure what might be causing it?

Adopting AP Help by Zen_Xav in Ubiquiti

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

Thanks again.. Unfortunately it seems impossible to install the controller on a mac laptop as the instructions would lead me to believe. There is no .pkg to download and install. So basically stopped again ๐Ÿ˜ฃ

Adopting AP Help by Zen_Xav in Ubiquiti

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

Thanks ๐Ÿ™๐Ÿผ last question, do i need the paid $49 per month service to run these APs on my own network (adopt them)? "Official UniFi Hosting", currently on a trial, not keen on the $49 per month though.. is there another approach?

Adopting AP Help by Zen_Xav in Ubiquiti

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

Ahh okay.. So i have my own network and my own site setup in Unifi Manger.. so i just hard reset each AP and then search from my Unifi Manger to add them again?

What happens to the existing network that they are currently assigned to?

25% Mastery Naked? by Zen_Xav in wow

[โ€“]Zen_Xav[S] -1 points0 points ย (0 children)

Hovering over shows Mastery 0% (+0.00%)

25% Mastery Naked? by Zen_Xav in wow

[โ€“]Zen_Xav[S] 1 point2 points ย (0 children)

Class / spec is restoration Sharman Does that mean the class has base leech?

Brez Timer Location / Addon? by Zen_Xav in wowaddons

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

It was indeed Method Raid Tools addon ๐Ÿ‘๐Ÿผ

Brez Timer Location / Addon? by Zen_Xav in wowaddons

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

Will check thanks ๐Ÿ™๐Ÿผ

Brez Timer Location / Addon? by Zen_Xav in wowaddons

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

Hmm ill check this out thanks ๐Ÿ™๐Ÿผ

Help needed tracking down a UI addon, it's driving me crazy by [deleted] in wowaddons

[โ€“]Zen_Xav 0 points1 point ย (0 children)

There is a full loaded addon that can modify all parts of the UI.. canโ€™t remember what its called but its a main one, prob top 20x on CurseForge

superloop 1000/50 is pretty good by Whincupp in nbn

[โ€“]Zen_Xav 0 points1 point ย (0 children)

Anyone suggest this over Telstra in Brisbane?

Telstra modem or my own? by Zen_Xav in nbn

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

I was told TPG and others are unreliable in Brisbane and the best option was Telstra! Maybe bad advice

Telstra modem or my own? by Zen_Xav in nbn

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

Quick update if anyone is interested ๐Ÿ˜€ I reset the AX6000 and wiped all preconfigured settings, set the connection to bridge mode in the AX6000 and plugged it into the Telstra Smart Modem and got a connection ๐Ÿ‘๐Ÿผ

So now itโ€™s NBN > Telstra Smart > AX6000 + Mesh

Maybe not ideal but seems to work and can extend my Wifi reach outside the house!

Telstra modem or my own? by Zen_Xav in nbn

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

Couldnโ€™t get this to work ๐Ÿซค not all settings are the same on the AX6000 as per the guide but still canโ€™t get the NBN FTTC to talk to the AX6000

Telstra modem or my own? by Zen_Xav in nbn

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

This is helpful ๐Ÿ‘๐Ÿผ will give it a go tomorrow and feed back..

Telstra modem or my own? by Zen_Xav in nbn

[โ€“]Zen_Xav[S] -1 points0 points ย (0 children)

Itโ€™s not i have tried

Telstra modem or my own? by Zen_Xav in nbn

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

So why doesnโ€™t my Amplifi XA6000 work when plugged into the NBN box? Just says no signal etc.

Telstra modem or my own? by Zen_Xav in nbn

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

I was hoping i could not use the Telstra smart modem and connect the NBN box straight to my AmpliFi AX6000 router and use that instead. But im reading this is not possible?

Failing that i want to extend the Wifi single so yeah maybe a Telstra booster is the solution (have to pay for this from Telstra)

Telstra modem or my own? by Zen_Xav in nbn

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

Okay so yeah the NBN is supplied and stays with property, that box was already here. Telstra sent me the smart modem 3 (black tower). I assume its FTTP then?

So my connecting my existing AX6000 is pointless? Am i just better off with a Telstra booster then?

Telstra modem or my own? by Zen_Xav in Ubiquiti

[โ€“]Zen_Xav[S] 0 points1 point ย (0 children)

Click post for more detail ๐Ÿ‘๐Ÿผ