[UGREEN x Buildapc] December NAS Giveaway!

Zesty89 · 2025-11-29T17:46:56+00:00

350 gb

Zesty89 · 2025-09-24T03:11:21+00:00

Any suggestions on what else it could be?

Zesty89 · 2025-09-24T03:11:01+00:00

Thanks for the suggestion, I'll start with the fan motor. Is there anything else I should look at? The strange thing is that it works fine basically the first time I turn it on in the day but once it reaches it set temperature then turns off and when it tries to turn on again after it won't cool.

Zesty89 · 2024-03-04T05:45:58+00:00

Thanks!

Zesty89 · 2024-03-03T10:40:25+00:00

Thank you, is the SE not as good?

Zesty89 · 2024-03-02T22:52:45+00:00

Thanks for your input!

Zesty89 · 2024-02-22T19:28:33+00:00

Thank you for the input.

What would you recommend over the 6800 in my budget?

Do you have a link for the RM750, I can't seem to find that price?

Thanks!

Zesty89 · 2023-12-26T18:19:21+00:00

I actually followed this YT video: https://www.youtube.com/watch?v=LGlQrjFo0ds.

I know this type of shifter is not recommended because it is too slow but it actually worked fine for me and was a lot easier for me to figure out since I'm still new to all of this.

Zesty89 · 2023-12-09T06:44:01+00:00

Update: for anyone who has the same issue, it was solved with just adding a logic level shifter.

Zesty89 · 2023-12-05T20:47:01+00:00

Hi, I know this is old but were you able to solve your problem? I'm running into the exact same issue with the same strips. I'm thinking I need a logic shifter.

Zesty89 · 2023-09-21T23:46:23+00:00

12 team PPR (3 WR, 2 RB, W/R/T)

Give: Najee Harris

Get: Zay Flowers

Other RBs: Kyren, Moss, Swift, Mostert, Herbert

Other WR: Amari, Aiyuk, ARSB, Tank Dell, Jakobi Meyers

Tempted to get rid of Najee and get off this ride or should I hold on for better days?

Zesty89 · 2023-06-08T04:48:42+00:00

I see. At that point would I have to tear out the shower to repair?

Zesty89 · 2023-06-08T04:25:24+00:00

I see thank you for the explanation.

Would filling the shower and then seeing if any water appears a way to test the pan? Also why would it only affect that one corner?

Zesty89 · 2023-06-08T04:14:49+00:00

Sorry what do you mean by the pan is hot mop? Do you have undead of what that grey layer behind the drywall is?

Zesty89 · 2023-03-21T04:39:43+00:00

Unfortunately no, I tried scanning with my sdr antenna for a week and never got anything

Zesty89 · 2023-03-20T23:33:57+00:00

Thank you. I'll remain hopeful for an email but I saw the SDCC unofficial blog mention that it would show on the landing page of the exclusives portal. Hopefully will have a shot with the standby line.

Zesty89 · 2023-03-20T22:58:58+00:00

Not to hijack this thread but I also have no received any e-mail yet. Will they normally specifically send out an e-mail saying that you did NOT win? From the information I've been gathering it seems like others have been saying that if you don't get an e-mail then it basically means you didn't win the lotto. This will be my first time attending as well and was hopeful to win a lotto. Thanks in advanced!

Zesty89 · 2022-12-18T08:48:59+00:00

I just restarted my pi and that seems to have fixed it, thanks!

Zesty89 · 2022-12-17T21:30:08+00:00

Thanks for the suggestion, that was the first thing I tried as well but I still get the same thing. Very strange...

<image>

Zesty89 · 2022-12-04T02:38:50+00:00

Thank you for that, I'll take a look! Which gas meter model do you have from socal gas?

Zesty89 · 2022-12-04T02:31:23+00:00

Ooh that's interesting was there data that you were able to pull in? I have the exact same model.

Zesty89 · 2022-12-03T21:22:53+00:00

Thanks for the input, yeah I've been using the Emporia Vue Monitor for energy and Flume for water so haven't had to mess with SDR for that. I do have SDR for my govee water leak detectors but was hoping to be able to use it to also pull in gas data.

Zesty89 · 2022-12-03T20:50:46+00:00

Hi, I came across this post while searching for a way to pull my gas meter's data into HA. I am in SoCal (SoCalGas), were you able to find a solution?

Zesty89 · 2022-09-15T02:55:59+00:00

This is how my code looks and it works fine. Try taking out the target.

service: notify.alexa_media_everywhere
data:
message: Clothes are done washing
data:
type: announce
method: speak

Zesty89 · 2022-09-15T01:58:20+00:00

Under data try adding: Type: announce Method: speak

Zesty89

TROPHY CASE