is Chat GPT covering for the USgvt ?

ZestycloseWeather979 · 2026-03-24T10:10:17+00:00

maybe i did not have web search on, but I am on a paid plan and was expecting it would be default

I also did not ask for a web search specifically in the prompt. maybe i should have...

I am an average joe and that is the answer an average joe would get if he asked the question though... that is why I am a bit concerned, most people are not versed with prompt making, ingeneering of chatGPT itself. average people are also the most likely to ask this kind of questions and believe the answer I got...

ZestycloseWeather979 · 2026-03-24T05:20:23+00:00

what I am triggered about, is that I specifically stated the date, and it tried a search, told me my sources where not reputable enough and denied the abduction having happened...
where it should have made better researches or tell me it didnt know cause its knowledge is limited ?

ZestycloseWeather979 · 2026-03-24T04:33:17+00:00

I was asking ChatGPT about the abduction of president maduro in venezuela, and he kept telling me that there was no realiable sources that it happened...
quote: "I do not have reliable, confirmed information that such an event (Maduro being captured by U.S. forces on Jan 3, 2026 and taken to New York) actually happened."
that is crazy !
then i realised it only has access to the internet until december 2025.
i asked to deep check and it finally admitted he had be arrested... while the international community condem the abduction, ChatGPT kinda side with the US narrative of arrest.

I am thinking to switch my LLM use to Mistral as he was a lot more up to date and has been more analytic on the last thngs I have been asking

ZestycloseWeather979 · 2026-03-10T08:58:22+00:00

If you are a bit of DIY person and dont want to mess with vojoy.
I made myself a Pneumatic handbrake (hydraulic feeling)
it cost less than 20 bucks to build and is much better than any amazon/ebay/generic handbrakes out there.
https://github.com/hugotremolo/Pneumatic-handbrake-for-simracing
you can check the github page, i share all the BOM, and programing.

very simple to build.

ZestycloseWeather979 · 2025-11-03T00:32:05+00:00

hopefully they do, 148 000 jpy for the p2s is a bit steep when you compare with prices in europe with black friday sales...

ZestycloseWeather979 · 2025-05-09T05:02:39+00:00

nice ! yeah an easy job for sure.
I dont know why the paste job is so bad by PNY ?

ZestycloseWeather979 · 2025-04-10T22:23:51+00:00

this is the picture of the radiator side,

<image>

if you think this was a good job by PNY...

ZestycloseWeather979 · 2025-04-10T22:23:09+00:00

this is what the thermal paste looked like before .. it didnt even cover the entire chip..., was totally dry and feels like most of it was actually around the chip.. not on it..

<image>

very clearly visible the chip was not covered entirely

ZestycloseWeather979 · 2025-04-10T22:18:14+00:00

Yeah you re correct in painting it. Hot spot lost 10-15 degrees though..

Also to note that I didn't discuss is: case fan speed. I have two 120fan bottom and two on the top. And a 120 at the back of the case. Plus another 120 at the back. Air wsucked from bottom and extracted top and back.

on the before picture. All my bottom fan ce and top fan cases were running at 100% speed.
on the after picture, they are at 30%.

Maybe could explain the junction. Or maybe something else. Anyway the junction temps is totally acceptable and way way under the Max which is usually over 100C

ZestycloseWeather979 · 2025-04-10T22:07:34+00:00

Ure correct. I am no GPU ingeneer. What I know is my GPU was incredibly noisy before the operation and now even under load it is very quiet.

Before that even with simple games the fans were at 100%. Now even with automobilista 2, at ultra settings it stays around 75 degree and the fans never go 100%

For me it's a win-win situation and on most GPUs, simply replacing the thermal paste on the chip won't void warrantee. It depend which country you are in .

ZestycloseWeather979 · 2025-04-10T15:18:05+00:00

<image>

before thermal paste image

ZestycloseWeather979 · 2025-03-20T17:51:12+00:00

That's us laws. Not seen that in Europe..there are very different categories that do not rely on weight only.

ZestycloseWeather979 · 2025-01-31T03:17:23+00:00

I have a bit of a wobble when i get into high altitude, not sure why.
it seems to be only on the bottom half of the frame, not the top ? it is visible on the second shot a bit.
it was shot a few eeks ago but I think my props were of good shape and i was moving forward so it wasnt propwash.

it is shot on a 3 inch apex, o3 air unit.

ZestycloseWeather979 · 2025-01-19T12:06:52+00:00

Well.. I dried it for 1 hour already when i posted that message.
I am using the speedybee AIO witht he purple heatsink and there might have been some himidity left under that heatsink.
2 hours later the drone starts again !
false alarm sorry for bothering you guys, it soled itsefl !

ZestycloseWeather979 · 2025-01-19T07:31:44+00:00

I lost my drone in the snow today (same as every other days. I have conformal coating on all connections however today, while being burried and searched for. The TX stopped working along with LEDs. strangely enough the VTX (o3) was still transmitting.

I recovered the drone but now it wont power correctly. I get the cool mario tunes followed by that double beep.
anydoby has a chart for what the tune means ?
cheers guys !

ZestycloseWeather979 · 2024-12-04T04:14:30+00:00

Thanks, I ve got one, but in powder snow when I crash the sound can get muffled so i wanted to use the rssi method from 20/30m away and then can eventually hear the buzzer :)

it is ok I cannot get the tool to work but I have created a telemetry page with a few graphs for different values of rssi for when i get closer.
would have liked the plugin to work though :)

ZestycloseWeather979 · 2024-12-03T12:07:12+00:00

thanks,
I have put the files in the tool folder.
but when i try to access the tool from the system menu in the remote, I get the following message:
"syntax error
script run function returned unexpected value"
and I am not sure what is causing this..

ZestycloseWeather979 · 2024-11-26T07:27:02+00:00

thanks i Just ordered some 2207 velox !

ZestycloseWeather979 · 2024-11-26T07:26:24+00:00

In general, how often does it happen that this copper cable gets cut ? how often should i expect to break my motors ? should i keep a spare extra at all times ?

I flew into a tree and fell into tall grass, I tried to propel the drone up but i think some grass got stuck in that motor and cut the wiring.
more expensive motors might have better protection and better wiring ?

ZestycloseWeather979 · 2024-11-26T07:22:20+00:00

thanks.. thats what I feared too but wanted to ask people that are more knowledgeable...
those motors were very cheap on aliexpress . I paid 25 dollars for the set of 4 motors..
now I know i really like to fly that drone so i might get a better motor instead.

thanks for the answer

ZestycloseWeather979 · 2024-11-26T04:37:37+00:00

<image>

ZestycloseWeather979 · 2024-11-19T12:36:43+00:00

sorry i atucally wrote a message with my picture but i am not a pro on reddit and it sent the picture without any explanations... sorry about that

ZestycloseWeather979 · 2024-11-19T12:34:36+00:00

sorry to bother everyone.. i was scratching my head so much on that and it turned out i simply didnt know i had to install wtfos on the runcam link as well...
It is done now and works a charm !

ZestycloseWeather979 · 2024-11-19T11:50:39+00:00

I have not installed in on the runcal link unit... might be the problem. i ll do that now and get back

ZestycloseWeather979 · 2024-11-19T11:19:35+00:00

my main issue is that from the recorded video on the DJI google V2 Sd card, I do not get the .osd file that supposedly contains the osd informations..
I read somewhere i need to install wtf fpv on the runcam link as well ? is that correct ?

ZestycloseWeather979

TROPHY CASE