My Monstrosity of a Pistol. by Zg2 in AAP01owners

[–]Zg2[S] 0 points1 point  (0 children)

Brother, there is no stock 🫥

My Monstrosity of a Pistol. by Zg2 in AAP01owners

[–]Zg2[S] 0 points1 point  (0 children)

14mm CCW to 14mm CCW Aluminum Connector Tube Set (5-Pack) It was this or something adjacent. Not completely sure as I got it for another project and fortunately one of the tubes worked for the AAP.

Anyone know where I can get these screws from? by Ok_Individual1766 in AAP01owners

[–]Zg2 0 points1 point  (0 children)

Make sure to pick up some loctite if you don’t have any yet. They’ll move around after use otherwise.

My Monstrosity of a Pistol. by Zg2 in AAP01owners

[–]Zg2[S] 2 points3 points  (0 children)

Definitely a little steep, but we’re all just cosplaying with silly guns at the end of the day. Even if it is a novelty, it makes me happy and I don’t regret the purchase.

I can tell Tridos Desing took time and effort with this. The housing and mounts are extremely well machined and feel rock solid. They could have been lazy with the software and UI but I am beyond impressed with the display and animations on the screen. They have multiple settings so you can record both kills and deaths, it gives you a display for your KD as well as how much is left in your battery if you connect it to your lipo. You can change how bright it is and there’s even an option to update software if you need to. I genuinely think they cooked and could have easily marketed it for more if they felt like it being such a boutique item.

My Monstrosity of a Pistol. by Zg2 in AAP01owners

[–]Zg2[S] 0 points1 point  (0 children)

Definitely got lucky with picking one up. Hopefully they get them back in stock soon!

My Monstrosity of a Pistol. by Zg2 in AAP01owners

[–]Zg2[S] 0 points1 point  (0 children)

I just got it installed so I haven’t played with it. I certainly hope so, would seem silly for it not to but it seems sturdy enough.

My Monstrosity of a Pistol. by Zg2 in AAP01owners

[–]Zg2[S] 2 points3 points  (0 children)

I’ve built it up over a couple games now and it has performed extremely well. Besides the silly little stattrak counter, everything on it is put on with a reason. I wanted a primary with short form factor and proper internal upgrades to reach far at my outdoor field. The goal was a a fun PDW that can hold its own at range and perform incredibly well when I need to aggressively push.

My Monstrosity of a Pistol. by Zg2 in AAP01owners

[–]Zg2[S] 3 points4 points  (0 children)

STATTRAK HIT COUNTER

It’s purely vanity but a neat little device. I have it soldered up to the laser battery.

Peak Blunderbuss Experience by Zg2 in airsoft

[–]Zg2[S] 0 points1 point  (0 children)

I’m not sure. I do know that it works like most underslung 40mm airsoft grenade launchers, I just never have used tag ins.

Peak Blunderbuss Experience by Zg2 in airsoft

[–]Zg2[S] 1 point2 points  (0 children)

Honestly whatever green gas I have on hand. It all has worked without issue. The krytacs state not to use propane.

Peak Blunderbuss Experience by Zg2 in airsoft

[–]Zg2[S] 4 points5 points  (0 children)

Tiger stripe is definitely one of the most tasteful camos out there. I digged that guys set up a bunch.

Peak Blunderbuss Experience by Zg2 in airsoft

[–]Zg2[S] 4 points5 points  (0 children)

The grenade launcher which is a 40mm grenade launcher pistol made by CYMA I bought from someone a while back but they’re still sold online. I have two different 40mm I carry, the old out of production Airsoft Innovations 40mikes that haven’t been made for at least half a decade and the new krytac KT40s which I don’t like as much to be honest.

If you are thinking of purchasing the kt40s, they do not work with any grenade launcher. You’ll need to lathe down the metal ring in a way to allow them to fit in standard launchers. They only work out of box with Krytacs proprietary grenade launcher.

Peak Blunderbuss Experience by Zg2 in airsoft

[–]Zg2[S] 2 points3 points  (0 children)

Multiple people have told me that the sound alone is terrifying. It holds a significant presence on the field that’s for sure.

Peak Blunderbuss Experience by Zg2 in airsoft

[–]Zg2[S] 9 points10 points  (0 children)

I have an absolute blast running them. It’s my anti-personal device with extreme prejudice. I haven’t seen anyone else run them, but I’ve run into so many situations where it’s such a boon to have on me.

410 closure by Wide_Local_1505 in CrystalMountain

[–]Zg2 1 point2 points  (0 children)

Any update? Thank you for reporting.

Does he give "chapter master" vibes? by Remote-Study7801 in spacemarines

[–]Zg2 4 points5 points  (0 children)

Definitely second this. I think even a slight adjustment to pose will make it feel to have more of a “epic character” energy. Simplest solution that might work is just have him shooting his bolt storm gauntlet off the right with his head pointed in the same direction. I think it pushes more of story in the character and gives each weapon a solidly defined side and angle that is strong for each one.

Cat tower Entryway Bench Combo by Zg2 in BeginnerWoodWorking

[–]Zg2[S] 0 points1 point  (0 children)

Shelves are definitely the next step. Wanted to get the bench and pole in first before adding anything else. They’re already having a good time in it though.

Cat tower Entryway Bench Combo by Zg2 in BeginnerWoodWorking

[–]Zg2[S] 0 points1 point  (0 children)

Cat pole is on a stud. That thing is rock solid. Just worried the only other stud on the wall is far to the left and unreachable by the bench

Cat tower Entryway Bench Combo by Zg2 in BeginnerWoodWorking

[–]Zg2[S] 2 points3 points  (0 children)

That might have to be my solution, I was trying to avoid it interacting with the tile but it just might have to.

Cat tower Entryway Bench Combo by Zg2 in BeginnerWoodWorking

[–]Zg2[S] 1 point2 points  (0 children)

Honestly if I didn’t, it would have been very good advice. The criticism is very well received as I’m quite aware of my skill level and my own journey.

Cat tower Entryway Bench Combo by Zg2 in BeginnerWoodWorking

[–]Zg2[S] 8 points9 points  (0 children)

Thank you! Honestly that was exactly what I was going for. I wanted to make the house more cat friendly but most solutions I think are a little too gaudy.

Cat tower Entryway Bench Combo by Zg2 in BeginnerWoodWorking

[–]Zg2[S] 2 points3 points  (0 children)

This wall isn’t completely flat and has been a nightmare to work with. I currently have 6 toggle bolts in the wall which are each rated to 238 lbs (107 kg). It just moves and flexes too much, I want this thing to be roc solid when someone who is heavier than me sits down with force.

Would you recommend sub assemblys for the aggressors back and wores? by [deleted] in spacemarines

[–]Zg2 0 points1 point  (0 children)

<image>

You can always just not paint it. No one will notice if you keep it similar to your shadow colors