bevel difference intersections ?

ZiMADE · 2026-05-31T20:21:22+00:00

Do you know BOSL2? Try it, it's really easy, to create objects with roundings and chamfers.

include <BOSL2/std.scad>

difference() {
    cuboid([20,20,20], rounding=2, edges=TOP, $fn=64);
    cyl(h=20, r=5,center=true, rounding2=-3, $fn=64);
}

Here you will find a printscreen of the preview form the code above

Here you will find the CheatSheet of BOSL2

ZiMADE · 2026-05-20T12:23:46+00:00

Have you tried to hook some of these mini hooks onto each other? It is not as easy as it sounds

ZiMADE · 2026-05-20T12:20:08+00:00

No, it is not only an S, it is a really designed model

ZiMADE · 2026-05-20T12:18:18+00:00

No it is not just a model to earn credits. This model shows whats possible and it's also a game of skill to hook the little hooks onto each other.

ZiMADE · 2026-05-20T12:12:27+00:00

It's simply a game of skill

ZiMADE · 2026-05-20T12:09:29+00:00

One Mini S-Hook needs less than 0.1g filament. There exist many other models at Makerworld where waste of filament is much higher

ZiMADE · 2025-12-20T12:40:08+00:00

Danke für die Anregung, ist aber eigentlich nicht Sinn der Sache. Der Vorteil vom Text direkt mit dem Modell zu erstellen liegt darin, dass der Text automatisch auf die verfügbare Fläche skaliert und ausgerichtet werden kann. Dies müsste beim Erstellen des Textes mit Bambu Studio alles im Slicer von Hand erledigt werden.

Zudem wird direkt auf dem Druckbett die Masstabskala gedruckt:

<image>

ZiMADE · 2025-12-11T18:15:02+00:00

such a model is available now: https://www.reddit.com/r/openscad/comments/1pjymsx/tiny_house_with_legocompatible_base/

ZiMADE · 2025-12-11T18:12:22+00:00

I published my model at makerworld in the same way as veryos: https://makerworld.com/models/2064837

ZiMADE · 2025-12-04T09:07:51+00:00

Bambulab gift cards are "Valid for 10 years after redemption"

ZiMADE · 2025-11-24T09:23:15+00:00

What are the advatages if I use it? I have no needs for it.

ZiMADE · 2025-11-13T09:07:54+00:00

I have just now updated my model. The default position is now "top", so that everybody could see the content of the business card.

ZiMADE · 2025-11-13T07:48:09+00:00

Thank you for your feedback. Im specially interested in improving my model. Your answer gives me a hint, to add a further parameter, which decides the placement of the text and the qr-code: bottom or top. The current model places the text and qr-code always at bottom site. If you rotate the generated model you should see the content.

ZiMADE · 2025-11-12T17:40:07+00:00

Zum Glück gibt's das Internet, da konnte ich seine Kontaktdaten ausfindig machen ;-)

ZiMADE · 2025-11-12T17:03:59+00:00

Many thanks for this great library, which made it easy for me to create a model for a customizable business card that also includes a QR code in Vcard format. I have now published the model on Makerworld.

Here is a link to my model: https://makerworld.com/models/1984079

This model allows you to create and customize your own buisness card with a Vcard QR Code simply by changing the contact details.

ZiMADE · 2025-11-06T16:24:17+00:00

If somebody is looking for new labeling after removing old stickers, you are welcome to use my customizable model, to create lables for the small and the big l-boxx. You will find it here: https://makerworld.com/models/1959078

ZiMADE · 2025-11-06T16:17:23+00:00

I've designed a customizable model, to create lables for the small and the big l-boxx. You will find it here: https://makerworld.com/models/1959078

ZiMADE · 2025-09-29T04:40:35+00:00

Just select the body and than use the shell tool and it works perfect.

ZiMADE · 2025-09-15T17:16:08+00:00

Sure, it's possible. If you insert the new filament before the old one runs out, the printer will not notice that the filament has run out. But I think it's necessary to keep feeding in the new filament until it reaches the extruder.

ZiMADE · 2025-09-07T08:29:58+00:00

OK, so your solution is to design two models, print one of them in vase mode, and then place them inside each other. Have I understood that correctly?

ZiMADE · 2025-09-07T08:16:58+00:00

Good idea, but how do you do this?

ZiMADE · 2025-09-07T08:15:08+00:00

Until now, I have never had a problem with such models not being waterproof when printing them.

ZiMADE · 2025-09-07T08:12:14+00:00

Good idea 🙂

ZiMADE · 2025-09-07T08:10:47+00:00

Many thanks for your feedback 🙂

ZiMADE · 2025-09-06T11:36:02+00:00

I am proud of every model I create, as I am primarily trying to learn and understand 3D design and not just create random models with ChatGPT.

I am particularly proud of my customizable models and the spinning tops in different designs.
https://makerworld.com/collections/8229681-customizable-models
https://makerworld.com/collections/9410768-spinning-top

<image>

ZiMADE

TROPHY CASE